| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Pro Drive 35 hp http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=73287 |
Page 1 of 1 |
| Author: | BMR1214 [ Sun Dec 02, 2018 1:27 pm ] |
| Post subject: | Pro Drive 35 hp |
Looking for information and opinions on stage 2 Performance kits. Thanks Sent from my iPhone using Tapatalk |
|
| Author: | Will C [ Wed Dec 05, 2018 12:26 pm ] |
| Post subject: | Re: Pro Drive 35 hp |
Everyone's stage 2 is different. A good stage 2 motor will be a a lot more fun to drive than stock. Load carrying ability goes way up also |
|
| Author: | banded-mallard [ Thu Dec 06, 2018 9:19 am ] |
| Post subject: | Re: Pro Drive 35 hp |
PD is 36, 37 or 40. What year model do you have? CDI or NON-CDI? Will make a difference depending on your mods and what you want to do. CDI are protected by 4750 coils when adding performance parts. So your cam will dictate that. Non-cdi has no limiter and will spin to the moon and will blow up if you don't know what your doing. Each has plus and minus. |
|
| Author: | BMR1214 [ Thu Dec 06, 2018 9:21 am ] |
| Post subject: | Re: Pro Drive 35 hp |
I have a 36 hp NON-CDI. Also what do y’all think of the MAC Muffler? Sent from my iPhone using Tapatalk |
|
| Author: | banded-mallard [ Thu Dec 06, 2018 9:46 am ] |
| Post subject: | Re: Pro Drive 35 hp |
Exhaust is a very small piece of the pie when considering performance. Any free flowing exhaust will do just fine unless your in the "hey look at my new shiny $700 exhaust" crew. You can take a stock exhaust, gut it, and it will flow just as good as all these high end exhaust. You would need a dyno to tell the difference. AND....... they all crack at some time. its just the nature of the SS. When I did my mod on my old engine, Heads are #1. You can put all that fancy shit on it you want, but if the engine can't breathe, it won't run. Everything else you do after heads will be complimentary. |
|
| Author: | banded-mallard [ Thu Dec 06, 2018 9:52 am ] |
| Post subject: | Re: Pro Drive 35 hp |
read this. I did mine in different stages and noted the changes when I modded my 07PD NON-cdi. Gives you an idea of what to expect. UNLESS..... you have a gen3 lower, then all speeds will be slower. |
|
| Author: | brycecheramie [ Sun Dec 09, 2018 1:38 pm ] |
| Post subject: | Re: Pro Drive 35 hp |
You can say that again! |
|
| Author: | Wchauvin [ Sun Dec 09, 2018 1:46 pm ] |
| Post subject: | Re: Pro Drive 35 hp |
Are the gen 3 lowers slower because they are geared differently? |
|
| Author: | banded-mallard [ Sun Dec 09, 2018 2:20 pm ] |
| Post subject: | Re: Pro Drive 35 hp |
Yes |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|