|
FAQ
• Login
|
|
It is currently Thu Mar 28, 2024 10:11 am
|
|
Page 1 of 1
|
[ 8 posts ] |
|
Author |
Message |
Johnyd883
MMT Member
Joined: Mon Apr 22, 2019 10:07 am Posts: 4
|
09 Prodrive issues
I have an 09 36hp pro drive that I just replaced the clutch, sump gasket , and flywheel fan on after it shattered because the clutch gave out on me, I went to crank it the other day and it’s turning over but not firing, the spark plugs have sparks, I tried cranking it without the deodes, and I can smell gas but it still won’t fire at all, any guesses to the problem? Thanks in advance
|
Wed May 22, 2019 6:33 pm |
|
|
banded-mallard
MMT 1000 Club
Joined: Wed Oct 07, 2009 8:18 pm Posts: 4310
|
Re: 09 Prodrive issues
|
Thu May 23, 2019 3:27 am |
|
|
Russ
MMT 1000 Club
Joined: Mon Dec 31, 2012 11:07 pm Posts: 4820 Location: West Monroe, LA
|
Re: 09 Prodrive issues
If he's getting spark, it's not the kill switch. He also mentioned unplugging the diodes, which removes the kill switch from the circuit.
#CFFITR #GhostBoat #Whoneedsphysicsihaveamudmotor
|
Thu May 23, 2019 6:46 am |
|
|
Johnyd883
MMT Member
Joined: Mon Apr 22, 2019 10:07 am Posts: 4
|
Re: 09 Prodrive issues
What could be past the plugs? I know its getting gas to it, could it be anything to do with the cam?
|
Thu May 23, 2019 9:12 am |
|
|
Will
MMT Elite Member
Joined: Fri Jul 08, 2011 1:54 pm Posts: 8133
|
Re: 09 Prodrive issues
Replaced the sump gasket as in you had the block apart? If so, did you mess with the cam and get it out of timing? Same thing with fan shroud, did you mess with the flywheel and get it out of timing?
_________________ Before the internet, the majority of the village idiots stayed in their villages.
|
Thu May 23, 2019 11:02 am |
|
|
Johnyd883
MMT Member
Joined: Mon Apr 22, 2019 10:07 am Posts: 4
|
Re: 09 Prodrive issues
Yes the more I think about it the cam is probably out of line, any tips on getting this to line up? are their pre set line up marks on the cam? would this make it not fire?
|
Thu May 23, 2019 2:08 pm |
|
|
Will
MMT Elite Member
Joined: Fri Jul 08, 2011 1:54 pm Posts: 8133
|
Re: 09 Prodrive issues
If it is out of timing, you will have to take it back apart, yes there are divet marks that must line up, yes it will not fire if not timed properly.
_________________ Before the internet, the majority of the village idiots stayed in their villages.
|
Thu May 23, 2019 3:44 pm |
|
|
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
Re: 09 Prodrive issues
If it's too far out of timing, you could have smashed up your valves too.
Sent from my SM-T710 using Tapatalk
|
Thu May 23, 2019 7:49 pm |
|
|
|
|
Page 1 of 1
|
[ 8 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 256 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|