| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| 35 gtr intake replacement http://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=74075 |
Page 1 of 1 |
| Author: | calvin [ Sun Aug 11, 2019 12:48 pm ] |
| Post subject: | 35 gtr intake replacement |
Have a 35 gtr delta level 3. The stock briggs part of the intake between the cylinders broke into two pieces. Do I go back with stock or does anyone make a aftermarket one that is stronger. Thanks in advance |
|
| Author: | Will C [ Mon Aug 12, 2019 8:04 am ] |
| Post subject: | Re: 35 gtr intake replacement |
That's the first time I've heard of one breaking. I would replace it with another Briggs piece. Make sure your prop is not wired and causing vibrations. It would be nice to add a carb support of some kind but I know that intake sets the carb up pretty high |
|
| Author: | Russ [ Mon Aug 12, 2019 8:09 am ] |
| Post subject: | Re: 35 gtr intake replacement |
I've seen one, and now heard of yours. Stronger probably isnt necessary. The one I saw was involved in a tree/broken transom/boat flip incident. Stronger probably wouldn't have mattered since there was so much other engine/frame carnage lol. Btw, on a completely unrelated subject and to stir things up, that boat had no flotation, and we all decided that's why the boat wrecked and came apart. [WINKING FACE] #CFFITR #GhostBoat #Whoneedsphysicsihaveamudmotor |
|
| Author: | Will [ Mon Aug 12, 2019 4:50 pm ] |
| Post subject: | Re: 35 gtr intake replacement |
Has to be a manufacturer flaw. Just get another and keep going. Seen plenty of them "torqued" due to milled heads and none broken. |
|
| Author: | calvin [ Mon Aug 12, 2019 5:33 pm ] |
| Post subject: | Re: 35 gtr intake replacement |
ordered a new stock on today. The motor does vibrate alot. But gets smoother with every pass on the sand bar. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|