It is currently Tue Mar 17, 2026 9:43 am




Reply to topic  [ 38 posts ] 
 need a good boat builder 
Author Message
MMT Pro Member

Joined: Wed Feb 09, 2011 6:46 am
Posts: 213
Post need a good boat builder
Any imput on custom builders. im wanting a 15/50 with a hunt deck similar to the gator trax. had breaux brothers recommended to me. who knows about them or can recommend another good builder.


Tue Jan 24, 2012 6:24 pm
Profile
MMT Super Elite Member

Joined: Fri Dec 18, 2009 8:10 pm
Posts: 16915
Location: Rowlett, TX
Post Re: need a good boat builder
Breaux Brothers or Brother Breaux? Two different builders.


Garrett Pearce built both of our boats and we're happy with them. Few other sponsors on this site worth checking out.


Tue Jan 24, 2012 7:00 pm
Profile
MMT Sponsor
User avatar

Joined: Mon Jan 19, 2009 4:03 pm
Posts: 2216
Location: Walker, Louisiana
Post Re: need a good boat builder
Go to the picture section and check out some of the boats I have built. Also check out my website. www.deepsouthfab.com

_________________
Ideas not coupled with action
never become bigger than the
brain cells they occupied.

Owner
DEEP SOUTH CUSTOM BOATS (225) 252-2700

Good boats ain't cheap, Cheap boats ain't good!


Tue Jan 24, 2012 7:36 pm
Profile
MMT 1000 Club

Joined: Tue Nov 02, 2010 7:11 pm
Posts: 1435
Location: Bayou vista, Louisiana
Post Re: need a good boat builder
Garrett Pearce builds some fine boats That perform very very well. He built mine and I love it.

_________________
stage 3 GTR screaming behind the 1848 Garrett Pearce special. GET YOU SOME!


Tue Jan 24, 2012 7:45 pm
Profile
MMT 1000 Club
User avatar

Joined: Sat Jun 13, 2009 8:48 pm
Posts: 1830
Location: Belle Chasse, LA
Post Re: need a good boat builder
I'll throw my vote in for Uncle J. He built my rig, and I love it.

I would say talk to all of them, look at what they have built and go from there. You really don't want to make your decision based on what a bunch of keyboard ninjas tell you!!

_________________
Mud Buddy 4500 Black Death hauling the Uncle J 18x58


Tue Jan 24, 2012 8:13 pm
Profile
MMT Pro Member

Joined: Tue Dec 07, 2010 8:16 am
Posts: 56
Location: Flooded timber
Post Re: need a good boat builder


Wed Jan 25, 2012 7:44 am
Profile
MMT Elite Member
User avatar

Joined: Wed Jan 14, 2009 7:54 pm
Posts: 5582
Post Re: need a good boat builder


Wed Jan 25, 2012 8:04 am
Profile
MMT Sponsor

Joined: Fri Jul 24, 2009 7:26 am
Posts: 10388
Location: S-Ville, LA
Post need a good boat builder
Patato
Potato


Wed Jan 25, 2012 8:06 am
Profile
MMT 1000 Club
User avatar

Joined: Wed Jan 14, 2009 5:23 am
Posts: 4514
Location: Lafayette, La
Post Re: need a good boat builder


Wed Jan 25, 2012 8:50 am
Profile
MMT Sponsor

Joined: Fri Jul 24, 2009 7:26 am
Posts: 10388
Location: S-Ville, LA
Post need a good boat builder
Just a FYI and question since everyone knows everyone else's business......

Last year we made over 80 boats. Out of the 80 boats, we had 2 or 3 that had a minor issue. We took care of it in the most timely manner and made sure that the customer was 100% satisfied..

If I am missing something, would someone please come forth. I hear negative from people that don't own a uncle j boat.

When will these so called unhappy cracked leaky boat owners come out??


Come out... Come out.. Were ever you are !!!!!!!!


Wed Jan 25, 2012 9:08 am
Profile
MMT Pro Member

Joined: Tue Dec 07, 2010 8:16 am
Posts: 56
Location: Flooded timber
Post Re: need a good boat builder
Everyone is entitled to their opinion, and EVERYONE that has commented on my boat said it looked bad arse. Don't hate the player, hate the game... :lol:


Wed Jan 25, 2012 9:17 am
Profile
MMT 1000 Club
User avatar

Joined: Sat Jun 13, 2009 8:48 pm
Posts: 1830
Location: Belle Chasse, LA
Post need a good boat builder
Nothing but compliments on my rig either. Same goes for the other 4 of my buddies with Uncle J boats. And to my knowledge, none of them have any leaks.

_________________
Mud Buddy 4500 Black Death hauling the Uncle J 18x58


Wed Jan 25, 2012 9:50 am
Profile
MMT Elite Member
User avatar

Joined: Tue Nov 23, 2010 6:33 pm
Posts: 5603
Location: Corner of Hell an high water, La
Post Re: need a good boat builder
If I can't break it. It can't be broken. Only thing I have broken is my grab bar. I am kinda scared to get it beefed up cause I think it's gonna start breaking my ribs

_________________
You have your whole life to be an idiot, take a day off!


Wed Jan 25, 2012 10:03 am
Profile
MMT Pro Member
User avatar

Joined: Wed Oct 19, 2011 8:29 pm
Posts: 87
Post Re: need a good boat builder
Hey swamp rat i drove 16 hours for my uncle j boat and it was worth every damn minute of the boats are bad ass it took jason no time to build mine and for a great price i have a 18 54 and with me at 6 8 and 350 lbs and two other guys and all decoys guns and a dog i got 33 mph out of my boat these boats just down right bad ass and tough as hell i guarantee it


Wed Jan 25, 2012 10:16 am
Profile
MMT Elite Member
User avatar

Joined: Tue Sep 13, 2011 11:46 am
Posts: 5216
Location: Across the Bayou, LA
Post Re: need a good boat builder

_________________
35 GTR - 1754 Extreme



Wed Jan 25, 2012 10:22 am
Profile
MMT Pro Member

Joined: Tue Dec 07, 2010 8:16 am
Posts: 56
Location: Flooded timber
Post Re: need a good boat builder


Wed Jan 25, 2012 10:48 am
Profile
MMT 1000 Club
User avatar

Joined: Wed Jan 14, 2009 5:23 am
Posts: 4514
Location: Lafayette, La
Post Re: need a good boat builder
Damn that Kookaid must be good


Wed Jan 25, 2012 10:54 am
Profile
MMT Sponsor

Joined: Tue Jan 13, 2009 7:07 pm
Posts: 16608
Post need a good boat builder

_________________
17x48 extreme stage 2 GTR
20X60 DUAL RIG BOWFISHING ADDITION
http://www.scalesandtailsbowfishing.com


Wed Jan 25, 2012 11:02 am
Profile
MMT 1000 Club
User avatar

Joined: Wed Jan 14, 2009 5:23 am
Posts: 4514
Location: Lafayette, La
Post Re: need a good boat builder


Wed Jan 25, 2012 11:05 am
Profile
MMT Sponsor

Joined: Fri Jul 24, 2009 7:26 am
Posts: 10388
Location: S-Ville, LA
Post need a good boat builder
Terry.
That last post was spelled correctly and had good grammar.

Who has access to your account?


Wed Jan 25, 2012 11:06 am
Profile
MMT Sponsor

Joined: Fri Jul 24, 2009 7:26 am
Posts: 10388
Location: S-Ville, LA
Post need a good boat builder
He has a factory modded Mudbuddy. Think a 4500.


Wed Jan 25, 2012 11:10 am
Profile
MMT Sponsor

Joined: Tue Jan 13, 2009 7:07 pm
Posts: 16608
Post need a good boat builder

_________________
17x48 extreme stage 2 GTR
20X60 DUAL RIG BOWFISHING ADDITION
http://www.scalesandtailsbowfishing.com


Wed Jan 25, 2012 11:39 am
Profile
MMT Sponsor

Joined: Fri Jul 24, 2009 7:26 am
Posts: 10388
Location: S-Ville, LA
Post need a good boat builder
Baby elephant? Really?????


Wed Jan 25, 2012 11:40 am
Profile
MMT 1000 Club

Joined: Thu Jan 22, 2009 10:37 pm
Posts: 2577
Post Re: need a good boat builder
J,when I was a commercial snapper fisherman,is always pay attention to what the old timers had to say.
I can very well remember them telling me...son,when everybody jealous of you,
You doin somethin right...like they would tell me...
KEEP UP THE GOOD WORK....FUCK EM.


Wed Jan 25, 2012 2:13 pm
Profile
MMT Sponsor

Joined: Tue Jan 13, 2009 7:07 pm
Posts: 16608
Post need a good boat builder

_________________
17x48 extreme stage 2 GTR
20X60 DUAL RIG BOWFISHING ADDITION
http://www.scalesandtailsbowfishing.com


Wed Jan 25, 2012 2:45 pm
Profile
MMT Super Elite Member

Joined: Mon Oct 19, 2009 6:38 pm
Posts: 10201
Location: SETX
Post Re: need a good boat builder
If that dude is running33 and he's 350lbs. With a load, I need to get my money back and go where he went, I'm fully modded and I am running 33 34ish and I don't have near his weight


Wed Jan 25, 2012 3:15 pm
Profile
MMT 1000 Club
User avatar

Joined: Mon Feb 21, 2011 5:21 pm
Posts: 1800
Location: Idaho Falls, ID
Post Re: need a good boat builder

_________________
1976 16X48 Lowe powered by a 25hp MB LT and dino turds

To have really lived, you must have almost died. To those who have fought for it, freedom has a flavor the protected will never know.


Wed Jan 25, 2012 4:13 pm
Profile
MMT Pro Member

Joined: Wed Feb 09, 2011 6:46 am
Posts: 213
Post Re: need a good boat builder
I thank all u for the info, but here in SC anybody thats 6 ft 8" and 350 lbs is called MISTER or just plain old SIR lol im gonna check out uncle J and have already spoken to pearce


Wed Jan 25, 2012 8:28 pm
Profile
MMT Elite Member
User avatar

Joined: Fri Oct 09, 2009 1:50 pm
Posts: 9673
Location: New Iberia, La.
Post Re: need a good boat builder


Wed Jan 25, 2012 8:33 pm
Profile
MMT Sponsor

Joined: Fri Jul 24, 2009 7:26 am
Posts: 10388
Location: S-Ville, LA
Post need a good boat builder
Still awaiting some negative feedback from a customer ............………


Fri Jan 27, 2012 7:45 am
Profile
MMT Pro Member

Joined: Tue Feb 01, 2011 1:19 pm
Posts: 308
Post Re: need a good boat builder
Okay ya'll asked for it!!!! I have one of the cracked uncle J boats in question. It has been welded twice on the transom/ huntdeck area of the boat. As it was explained to me, my boat was built by a person who worked for jason for a short time and NO LONGER works for him due to inferior welding practices. It seems every boat this so called "king of welders" built has the same problems. There are people on this site who also have boats built by the same guy while he was working for himself who have the SAME problems I am having but will never come forward. Why , who knows ?? I will never understand it. I'm the type who calls a spade a spade and I can tell all the uncle J haters one thing right here right now, JASON is building me another complete rig, free of charge, exactly like my old one. Did I have to threaten him, no. Did he argue and say it must have been the way I treated the boat, no. His exact words where, "man there is no reason u deserve to be going through this". "This is not how I do buisiness and I will take care of it 100%" So all of the uncle j naysayers out there can chew on that a lil while. The man builds a great product and stands behind them as he says he will, end of story.


Fri Jan 27, 2012 8:14 am
Profile
MMT Elite Member
User avatar

Joined: Fri Oct 09, 2009 1:50 pm
Posts: 9673
Location: New Iberia, La.
Post Re: need a good boat builder
Damn Nonk J haters!!!!!!!!!!


Fri Jan 27, 2012 9:20 am
Profile
MMT Super Elite Member

Joined: Mon Oct 19, 2009 6:38 pm
Posts: 10201
Location: SETX
Post Re: need a good boat builder
Screw J....lmao


Fri Jan 27, 2012 11:46 am
Profile
MMT F.E.

Joined: Mon Jan 11, 2010 9:51 am
Posts: 770
Location: NVA
Post Re: need a good boat builder
I've read nothing but good things about J's boats, except for the remarks on this thread, but I've gotta get in a plug for my guys at Phowler.

I'm no hardcore, LA stump jumper, but I've been very pleased with my Phowler. The boat is tough, stable, and amazingly nimble, considering its size and power. I also enjoyed working with Bubba, Paul, and Bob to get my rig set up to my specifications. When my first rig was wrecked on my way home from the factory, these guys bent over backwards to build me another boat fast, before our season opened. FWIW, you've got two Phowler dealers down there in your neck of the woods.

_________________
Phowler 2066 w/ E5 37 ProDrive w/ Illowa Marine Heads
MoMarsh Fatboy/2 Honda


Fri Jan 27, 2012 12:33 pm
Profile
MMT 1000 Club

Joined: Thu Jan 22, 2009 10:37 pm
Posts: 2577
Post Re: need a good boat builder
I have some negative feed bak too
I have a "looks like shit" uncle j hull.i sometimes get aggrivated when im in a hurry at the launch and everybody wants to know all the damn lil details about that"nice freakin boat man".same thing at the pumps,look up and theres 3 or 4 people wit their elbows on the rail just looking bow to stern,nodding their heads up and down....creepy bastards.not just talkin bout a few times either,every fukin time,it never fails.i even got my lil boy answering questions,hes heard em soo many times.you try not to be an ass about it but the shit gets old!


Fri Jan 27, 2012 12:45 pm
Profile
MMT 1000 Club
User avatar

Joined: Sat Jun 27, 2009 11:50 pm
Posts: 3777
Location: Knotts Island, North Carolina.
Post Re: need a good boat builder
You're always gonna have old grumpy bastards, and you'll always have new blood coming in and pissing them off, because the old grumpy assbaskets can't stand to see new blood doing well.

Some of you grumpy bastards I like. And then some of you I find humor in your anger/jealousy/sadness. You know who you are. :lol:

_________________
Put yer face in the myrtles.


35 GTR chasing a 1650 Polarkrap.


Fri Jan 27, 2012 12:54 pm
Profile
MMT 1000 Club

Joined: Thu Jan 22, 2009 10:37 pm
Posts: 2577
Post Re: need a good boat builder
Devilmusicdukk speaks truth.again.


Fri Jan 27, 2012 1:01 pm
Profile
MMT Addict
User avatar

Joined: Fri Jul 30, 2010 3:15 pm
Posts: 701
Location: pella, ia
Post Re: need a good boat builder
My buddies nickname my uncle j boat the attention whore. Gettin watched by everyone is the only thing i dont like bout the boat.


Fri Jan 27, 2012 1:12 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 38 posts ] 

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: