| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Poly trailer boards http://mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=72635 |
Page 1 of 1 |
| Author: | calvin [ Sun Jul 01, 2018 12:16 pm ] |
| Post subject: | Poly trailer boards |
Anyone usning HDPE boards poly boards, composite boards or whatever you want to call them from Menards, Lowes, etc. on trailer. How are the holding up to bending/breaking on your trailer from hard to launch places. |
|
| Author: | kirk [ Sun Jul 01, 2018 3:00 pm ] |
| Post subject: | Re: Poly trailer boards |
I bought some from Lowe’s, they are fine after 3-4 years. I did sand the edges, was afraid of the sharp corners. The only place where they look bad is where the transom sits on it. But I don’t have transom straps so that might could’ve solved the issue , but it doesn’t hurt the boat loading or unloading in anyway Sent from my iPad using Tapatalk |
|
| Author: | calvin [ Sun Jul 01, 2018 4:34 pm ] |
| Post subject: | Re: Poly trailer boards |
Thanks for the feed back. |
|
| Author: | Mallards Only [ Mon Jul 02, 2018 7:41 am ] |
| Post subject: | Re: Poly trailer boards |
I have them on my bigger jet sled trailer. They're much better than carpeted boards. Carpet rots and tears and has to be replaced with the boat off the trailer. Only drawback to the poly runners is they have to be installed carefully with countersunk screws. If a screw loosens or breaks and the flat head sticks up above the poly, it can put a nasty gash in your hull. Don't ask me how I know. 
|
|
| Author: | kirk [ Tue Jul 03, 2018 2:14 pm ] |
| Post subject: | Re: Poly trailer boards |
Mine were soft enough that my screw sank in plenty far enough to never even think about scratching the bottom of the boat. I counter sank them the first time, then the second time I just let the screw sink in on its own Sent from my iPhone using Tapatalk |
|
| Author: | daddyflea [ Sat Jul 14, 2018 12:19 pm ] |
| Post subject: | Re: Poly trailer boards |
Guys need some pictures of those boards |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|