| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| MB big blad///\\\GT big blade http://mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=10868 |
Page 1 of 1 |
| Author: | GaugeTheDuckDog [ Tue Jul 13, 2010 3:45 pm ] |
| Post subject: | MB big blad///\\\GT big blade |
Is one better than the other? I have been told that the Gt big blade is faster than the MB big blade. Is this true? why do the GT big blade cost 245 and the MB big blade cost 189? The MB big blade says "Guaranteed fastest mud motor blade on the market" Please tell me which prop is better. If you have ran both let me know what you though. |
|
| Author: | fish8503 [ Tue Jul 13, 2010 3:46 pm ] |
| Post subject: | Re: MB big blad///\\\GT big blade |
|
|
|
| Author: | GaugeTheDuckDog [ Tue Jul 13, 2010 4:49 pm ] |
| Post subject: | Re: MB big blad///\\\GT big blade |
Do you have a question? |
|
| Author: | POKER1 [ Tue Jul 13, 2010 5:08 pm ] |
| Post subject: | Re: MB big blad///\\\GT big blade |
| Author: | WestEndAngler [ Tue Jul 13, 2010 6:07 pm ] |
| Post subject: | Re: MB big blad///\\\GT big blade |
Stick with GT prop and quit being a tight arse 
|
|
| Author: | Gigafowl [ Tue Jul 13, 2010 6:22 pm ] |
| Post subject: | Re: MB big blad///\\\GT big blade |
Heard the "fastest prop" claim from MB too - yet not one person I know has recorded any better speeds on their GDSD with the MB prop as compared to the new 2 or 3 blade GDSD props.... I even asked if Chops would let me give the MB prop a trial, so I could post up a revue.... But got no reply... |
|
| Author: | deltaduckmaster [ Tue Jul 13, 2010 8:03 pm ] |
| Post subject: | Re: MB big blad///\\\GT big blade |
1.5 mph faster!! Ive run All of them!! I got a shed full of stainless LOL!! |
|
| Author: | dog walker [ Tue Jul 13, 2010 8:45 pm ] |
| Post subject: | Re: MB big blad///\\\GT big blade |
I compared the two side by side on the same rig,same day and the GT prop was better than the MB. |
|
| Author: | craig [ Tue Jul 13, 2010 11:02 pm ] |
| Post subject: | Re: MB big blad///\\\GT big blade |
| Author: | grizzon30's [ Wed Jul 14, 2010 8:32 am ] |
| Post subject: | Re: MB big blad///\\\GT big blade |
the guy who i bought my rig from had the mb big blade on it. Well, i ended up cracking my prop shaft housing and had to bring to gator tail to get fixed. Hoyt wasn't too happy to see the MB prop on there. He said theyve been known to get out of balance a lot easier thus causing viabration leading to carnage. I had them put the GT prop on but I havent had a chance to run it yet. |
|
| Author: | benelliman [ Wed Jul 14, 2010 8:37 pm ] |
| Post subject: | Re: MB big blad///\\\GT big blade |
I thought that their props came from MB. 
|
|
| Author: | CAJUN OUTLAW [ Thu Jul 15, 2010 12:33 am ] |
| Post subject: | Re: MB big blad///\\\GT big blade |
hey giga,get a review from ya pal labirdman,the big blade made a big diff on his boat.his boat is not "designed" for a mm but that prop sure made it better. |
|
| Author: | deltaduckmaster [ Thu Jul 15, 2010 5:02 am ] |
| Post subject: | Re: MB big blad///\\\GT big blade |
| Author: | Gigafowl [ Thu Jul 15, 2010 5:31 am ] |
| Post subject: | Re: MB big blad///\\\GT big blade |
| Author: | bbb [ Thu Jul 15, 2010 9:34 am ] |
| Post subject: | Re: MB big blad///\\\GT big blade |
| Author: | Gigafowl [ Thu Jul 15, 2010 12:32 pm ] |
| Post subject: | Re: MB big blad///\\\GT big blade |
Thats interesting.... I'm a bit confused by that longtail in the pics... But - I assume you have a GDSD mounted now... That is an interesting hull design - I saw the pics in the other thread - very nice looking rig - I bet it corners well with that "double tapered" design - not sure what your mfg calls it but it looks very similar to the Excel "double taper" design..... Your improved results and near 25 mph top speed might be similar to LaBirdMan's improved results at similar speeds with the MB Big Blade prop..... I'm gonna go out on a limb and say - ya'll benefitted from going DOWN to 10 pitch from the 11.5 to 12 pitch of the GDSD 3 blade prop - because in the other thread you stated that max performance came below 3750 rpm... I get max performance on my GDSD 3 blade @ 4000 @ 30mph-ish deep water and max performance on the GDSD 2 blade @ 3900 @ 31mph-ish deep water GDSD - Stock engine - light GDSD tapered hull 16x48 design - 6 gal fuel and me @ 220 |
|
| Author: | bbb [ Thu Jul 15, 2010 12:46 pm ] |
| Post subject: | Re: MB big blad///\\\GT big blade |
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|