MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
Prop Help Please!! http://mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=11065 |
Page 1 of 1 |
Author: | bigcajunboy [ Wed Jul 21, 2010 5:13 pm ] |
Post subject: | Prop Help Please!! |
hey guys, jus wanted to get a few different answers here, i hav a gtr 35 an was wanting 2 get another prop,the 1 i hav is from factory. it does well with me an a lite load but when i put alot of weight in the boat i cant even plain off.my boat is a 16ft welbuilt very lite boat im wanting a prop that goes fast loaded or unloaded, without taking performance out in mud/grass/shallow water.tanks a bunch |
Author: | WestEndAngler [ Wed Jul 21, 2010 5:20 pm ] |
Post subject: | Re: Prop Help Please!! |
A new prop will get you up on plane faster & carry a load. Are you out of water RPM's set to 4250? When my prop wore down I could get 4100 rpms in deep water when I switched it the rpms dropped down to 3900 area. |
Author: | quackconsumer [ Wed Jul 21, 2010 7:24 pm ] |
Post subject: | Re: Prop Help Please!! |
get a longer boat |
Author: | bigcajunboy [ Thu Jul 22, 2010 3:06 pm ] |
Post subject: | Re: Prop Help Please!! |
idk bout ma rpm ma tiny tack tried fighting a cypress branch and of course the branch won |
Author: | WestEndAngler [ Thu Jul 22, 2010 4:10 pm ] |
Post subject: | Re: Prop Help Please!! |
Replace it then get back to us... seriously I look at my TACH all the time. |
Author: | quackconsumer [ Thu Jul 22, 2010 4:33 pm ] |
Post subject: | Re: Prop Help Please!! |
Da stock big blade is da best all around prop out der at da moment for a GTR. |
Author: | MaXXis85 [ Fri Jul 23, 2010 6:33 am ] |
Post subject: | Re: Prop Help Please!! |
Author: | BROOKS [ Fri Jul 23, 2010 2:54 pm ] |
Post subject: | Re: Prop Help Please!! |
Is yore WeldBuilt a semi-vee configertation ?? |
Author: | bigcajunboy [ Fri Jul 23, 2010 9:17 pm ] |
Post subject: | Re: Prop Help Please!! |
it a regular flat bottom |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |