| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Replacing prop and lower seal http://mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=11530 |
Page 1 of 1 |
| Author: | mic_dundee [ Tue Aug 10, 2010 8:49 am ] |
| Post subject: | Replacing prop and lower seal |
I have a pd 36 and the lower seal is leaking near the prop. i am replacing the prop and lower seal and already have the parts to do the job. My question is, what is the best way to go about doing this? i understand the removal portion, but i don't know what type of threadlocker, anti-seize, or how to apply them properly. Any help would be much appreciated. thanks |
|
| Author: | BasinSlayer [ Sun Aug 22, 2010 7:34 pm ] |
| Post subject: | Re: Replacing prop and lower seal |
You probably could use any anti-sieze compound, but i would look for a anti-sieze ecspecially for stainless to stainless applications to prevent gauling later on down the line..they make a compound called "Anti-Gaul". its in a tube and the compund is yellow..not shure who makes it but i can find out tommorow at work and let you know buddy. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|