MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
Skeg replacement http://mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=19837 |
Page 1 of 1 |
Author: | mharms909 [ Fri Jul 08, 2011 7:34 pm ] |
Post subject: | Skeg replacement |
How do you know when its time to change the skeg? And how much does a replacement cost? |
Author: | quackconsumer [ Fri Jul 08, 2011 7:37 pm ] |
Post subject: | Re: Skeg replacement |
On what motor? |
Author: | mharms909 [ Fri Jul 08, 2011 8:20 pm ] |
Post subject: | Re: Skeg replacement |
That would help wouldn't it. 36hp Prodrive |
Author: | POKER1 [ Fri Jul 08, 2011 8:26 pm ] |
Post subject: | Re: Skeg replacement |
Author: | mharms909 [ Fri Jul 08, 2011 8:31 pm ] |
Post subject: | Re: Skeg replacement |
The round bar is not there and it is actually worn off where it is welded to the skeg right below the prop |
Author: | POKER1 [ Fri Jul 08, 2011 9:23 pm ] |
Post subject: | Re: Skeg replacement |
What I have found is the round bar under the prop keeps you from getting as many prop strikes when it rides up over stuff. If you have wore it off you must be running alot of sand or rocks. Without the round bar I find that I can dig deeper with the prop in a hard bottom. I haven't had any issues without it but I do get more prop strikes than before. |
Author: | mharms909 [ Fri Jul 08, 2011 9:58 pm ] |
Post subject: | Re: Skeg replacement |
Yea i do run a lot of rocks. West Tx is not a real muddy area. I just ran today the Brazos river and its nothing but bravel and rocks. Luckily i only had a couple of strikes on the bottom today ran about 15 miles |
Author: | POKER1 [ Fri Jul 08, 2011 10:10 pm ] |
Post subject: | Re: Skeg replacement |
Author: | Brinkleydog [ Wed Jul 13, 2011 1:18 pm ] |
Post subject: | Re: Skeg replacement |
West Texs suck on gear..... ![]() you ever run the Red River up that way....LOL |
Author: | bayouboy [ Mon Jul 18, 2011 11:15 pm ] |
Post subject: | Re: Skeg replacement |
I have like eleventy billion of those things laying around collecting dust. Shoot me an addy and I'll send you one. Oh! what year motor? Disclaimer: shipping and handing is the responsablity of the recipient and is not included in the deal, buyer or recipient also must make trade of equal value for item recieved. if recipient cannot make a trade there of or pay shipping than that sucks! because more than likely I will just give it to him or her for free. As most know I am a very generous dude when it comes to crap I have laying around, and I will help you out if I can. The truth is I'm not much on money or material things so a smile and a thank you very much will go a long way in my books. Its a pay it forward/karma type thing....... If you can read this with out hitting the increase page size option, well then my friend you gots some good mudda mucking eyes! lol |
Author: | coastal [ Tue Jul 19, 2011 10:34 am ] |
Post subject: | Re: Skeg replacement |
![]() |
Author: | Brinkleydog [ Tue Jul 19, 2011 1:10 pm ] |
Post subject: | Re: Skeg replacement |
mudda mucka.....BB you da man! kinda feel bad about charging you 1,900 for the sump cover now! ![]() ![]() ![]() |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |