MudmotorTalk.com
http://mudmotortalk.com/mmt_v2/

Gear teeth on my 2012 gtr
http://mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=71863
Page 1 of 1

Author:  on da bayou [ Mon Jan 08, 2018 5:41 pm ]
Post subject:  Gear teeth on my 2012 gtr

I have a 2012 35 gtr With hydraulic reverse wanting to know how many teeth or on the top pulley and how many teeth is on lower pulley on a stock gtr also what is the prop size and Pitch it is in a two blade and a three blade if any one know


Sent from my iPhone using Tapatalk

Author:  bluesky2012 [ Mon Jan 08, 2018 6:05 pm ]
Post subject:  Re: Gear teeth on my 2012 gtr

Take the transmission cover off. It'll have a 48 stamped on either the right or left side if it is 48


Sent from my iPhone using Tapatalk Pro

Author:  on da bayou [ Mon Jan 08, 2018 8:24 pm ]
Post subject:  Re: Gear teeth on my 2012 gtr


Author:  bluesky2012 [ Mon Jan 08, 2018 8:27 pm ]
Post subject:  Gear teeth on my 2012 gtr

The bottom is 48. The top is what ever you count to. I don't think the top has ever changed. I think the ones changed around 2012 went from 42 to 48 but I may be backwards.


Sent from my iPhone using Tapatalk Pro

Author:  Russ [ Mon Jan 08, 2018 8:36 pm ]
Post subject:  Re: Gear teeth on my 2012 gtr

The bottom used to be 45, changed to 48 around that time. The top is 36, I think. Marcus will be along shortly to correct me if it's 38.

#CFFITR
#TheGhostBoat
#whoneedsphysicsihaveamudmotor

Author:  on da bayou [ Mon Jan 08, 2018 8:37 pm ]
Post subject:  Re: Gear teeth on my 2012 gtr


Author:  Russ [ Mon Jan 08, 2018 8:39 pm ]
Post subject:  Re: Gear teeth on my 2012 gtr

12x10

#CFFITR
#TheGhostBoat
#whoneedsphysicsihaveamudmotor

Author:  on da bayou [ Mon Jan 08, 2018 8:40 pm ]
Post subject:  Re: Gear teeth on my 2012 gtr


Author:  bluesky2012 [ Mon Jan 08, 2018 8:43 pm ]
Post subject:  Gear teeth on my 2012 gtr

If Russ says it is, then it is. Thanks for the correction on 45 and not 42. Drinking beers and watching Alabama hopefully lose doesn't make for a strong memory of obscure facts.


Sent from my iPhone using Tapatalk Pro

Author:  on da bayou [ Mon Jan 08, 2018 8:48 pm ]
Post subject:  Gear teeth on my 2012 gtr

If u always have to push away with the tiller handle from u which way should I bend the tabs thanks


Sent from my iPhone using Tapatalk

Author:  bluesky2012 [ Mon Jan 08, 2018 8:51 pm ]
Post subject:  Re: Gear teeth on my 2012 gtr

Away from you. Check your weight distribution first and also prop plays into effect. Since you have a worn prop, may want to wait till you have a new one and see how that plays in.


Sent from my iPhone using Tapatalk Pro

Author:  Russ [ Mon Jan 08, 2018 8:55 pm ]
Post subject:  Re: Gear teeth on my 2012 gtr

Trim level affects the felt torque a lot, and a fresh prop will change where it's trimmed for best thrust. Unless you're gonna use that prop a while, just wait on the bending stuff.

#CFFITR
#TheGhostBoat
#whoneedsphysicsihaveamudmotor

Author:  on da bayou [ Mon Jan 08, 2018 9:09 pm ]
Post subject:  Re: Gear teeth on my 2012 gtr

Thanks baggy’s got my prop now to get work


Sent from my iPhone using Tapatalk

Author:  MaXXis85 [ Tue Jan 09, 2018 6:18 am ]
Post subject:  Re: Gear teeth on my 2012 gtr

Top gear is 38 Current bottom is 48. Used to be 45 lower, but was changed around 2011-2012 ish. The CDI motors additional charging system put more load on these units aswell as larger boats, 3 blade propellers were coming out; so they needed a lower gear ratio.
38/45 = 1.18:1
38/48 = 1.26:1

Author:  CypressCritter [ Tue Jan 09, 2018 10:39 am ]
Post subject:  Re: Gear teeth on my 2012 gtr

I have a 2011 GTR CDI

its a 38/45 and came stock with a power tech 12x10

Author:  pokey79 [ Tue Jan 09, 2018 1:51 pm ]
Post subject:  Re: Gear teeth on my 2012 gtr


Author:  on da bayou [ Thu Jan 11, 2018 7:41 pm ]
Post subject:  Re: Gear teeth on my 2012 gtr


Author:  MaXXis85 [ Fri Jan 12, 2018 7:36 am ]
Post subject:  Re: Gear teeth on my 2012 gtr

Port side top of belt box.

Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/