It is currently Thu Mar 28, 2024 4:17 pm




Reply to topic  [ 17 posts ] 
 Need P/N for PD Lower Seals 
Author Message
MMT Pro Member
User avatar

Joined: Wed Jul 21, 2010 5:59 pm
Posts: 406
Post Need P/N for PD Lower Seals
Pissed to see that my LU oil has gone chocolate milk again. Season starts this weekend for us out west. Hoping to get some new seals in the motor before then. Can anyone provide the P/N for the seals so i can see if I can find them local? Motor's got a 7/8" prop shaft.

_________________
32 PD with EVT cam, decked heads, shaved pistons and not enough sense to leave things alone!


Mon Oct 15, 2018 8:44 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Oct 07, 2009 8:18 pm
Posts: 4310
Post Re: Need P/N for PD Lower Seals
sierra 18-10127 is what it use to be unless they changed it.


Tue Oct 16, 2018 6:38 am
Profile
MMT Pro Member
User avatar

Joined: Wed Jul 21, 2010 5:59 pm
Posts: 406
Post Re: Need P/N for PD Lower Seals
Thanks, banded

_________________
32 PD with EVT cam, decked heads, shaved pistons and not enough sense to leave things alone!


Tue Oct 16, 2018 12:00 pm
Profile
MMT 1000 Club
User avatar

Joined: Fri Jan 16, 2009 3:18 pm
Posts: 1726
Post Re: Need P/N for PD Lower Seals
as long as their is fluid in the lower unit, run it. fix it later.


Tue Oct 16, 2018 6:32 pm
Profile
MMT Elite Member
User avatar

Joined: Wed Jan 14, 2009 7:23 am
Posts: 6233
Location: Tarkington, TX
Post Re: Need P/N for PD Lower Seals

_________________
Bayou Surface Drive
337-351-0362
Tarkington, TX 77327


Wed Oct 17, 2018 6:37 am
Profile
MMT 1000 Club
User avatar

Joined: Fri Jan 16, 2009 3:18 pm
Posts: 1726
Post Re: Need P/N for PD Lower Seals


Wed Oct 17, 2018 5:57 pm
Profile
MMT Elite Member
User avatar

Joined: Wed Jan 14, 2009 7:23 am
Posts: 6233
Location: Tarkington, TX
Post Re: Need P/N for PD Lower Seals

_________________
Bayou Surface Drive
337-351-0362
Tarkington, TX 77327


Thu Oct 18, 2018 5:25 am
Profile
MMT 1000 Club
User avatar

Joined: Fri Jan 16, 2009 3:18 pm
Posts: 1726
Post Re: Need P/N for PD Lower Seals
it's all good! I just don't want to see somebody miss their hunting season over a issue like that. roll that thing till you can get it fixed!!!!!!!


Thu Oct 18, 2018 3:36 pm
Profile
MMT Member

Joined: Mon May 28, 2018 4:17 pm
Posts: 31
Post Re: Need P/N for PD Lower Seals


Sat Oct 20, 2018 11:46 am
Profile
MMT 1000 Club
User avatar

Joined: Wed Oct 07, 2009 8:18 pm
Posts: 4310
Post Re: Need P/N for PD Lower Seals
I had on oil filled lower on my 07. You should be getting milky oil that quick. It will develop air bubbles and look different from running it, but not milky. I'm willing to bet you have the old 2 seal prop nut. I actually contacted PD and they swapped mine out to the newer style 3 seal prop nut for oil filled lowers for nothing, free of charge. Never had an issue after that.


Mon Oct 22, 2018 9:57 am
Profile
MMT 1000 Club
User avatar

Joined: Fri Jan 16, 2009 3:18 pm
Posts: 1726
Post Re: Need P/N for PD Lower Seals
if I am understanding you correctly, the fitting to fill the lower unit is the same as a outboard motor lower unit. I just use an outboard lower unit pump/fitting to fill my pd lower unit when I had one. I don't know the exact thread size.


Mon Oct 22, 2018 1:52 pm
Profile
MMT Elite Member
User avatar

Joined: Wed Jan 14, 2009 7:23 am
Posts: 6233
Location: Tarkington, TX
Post Re: Need P/N for PD Lower Seals
Shid just pout some earl in there!

_________________
Bayou Surface Drive
337-351-0362
Tarkington, TX 77327


Tue Oct 23, 2018 5:25 am
Profile
MMT Pro Member
User avatar

Joined: Sun Jan 25, 2009 11:25 am
Posts: 401
Location: Wisconsin
Post Re: Need P/N for PD Lower Seals

_________________
Phowler Extreme 1848 with 36PDFPR


Tue Oct 23, 2018 1:13 pm
Profile
MMT Pro Member
User avatar

Joined: Wed Jul 21, 2010 5:59 pm
Posts: 406
Post Re: Need P/N for PD Lower Seals

_________________
32 PD with EVT cam, decked heads, shaved pistons and not enough sense to leave things alone!


Fri Oct 26, 2018 11:53 am
Profile
MMT 1000 Club
User avatar

Joined: Wed Oct 07, 2009 8:18 pm
Posts: 4310
Post Re: Need P/N for PD Lower Seals
Shooter, its the same prop nut only machined deeper to hold 3 seals. If you have a local machine shop, simply have them do it. Thats if it will be a while getting one from PD. And the seals are orientated a certain way. I don't quite remember which way though.


Mon Oct 29, 2018 3:44 am
Profile
MMT 1000 Club
User avatar

Joined: Fri Jan 16, 2009 3:18 pm
Posts: 1726
Post Re: Need P/N for PD Lower Seals
they used to have u send in your nut with the 2 seals and they would send you the one with 3 seals in it. been a while since I did this.


Mon Oct 29, 2018 9:01 pm
Profile
MMT Pro Member
User avatar

Joined: Wed Jul 21, 2010 5:59 pm
Posts: 406
Post Re: Need P/N for PD Lower Seals
They still do, just got my 3 seal nut from PD, sent my original back for just the price of the 3 seals.
Good deal.

_________________
32 PD with EVT cam, decked heads, shaved pistons and not enough sense to leave things alone!


Sun Nov 11, 2018 6:04 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 17 posts ] 

Who is online

Users browsing this forum: No registered users and 152 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: