| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Lower Unit Gear Alignment http://mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=73674 |
Page 1 of 1 |
| Author: | okredleggs [ Sat Mar 23, 2019 8:07 pm ] |
| Post subject: | Lower Unit Gear Alignment |
Hey guys, I have a 2006 Gen 1 lower unit and replaced the bearing in the upper, now am putting back together, should I line up the gears a certain way?. Is there a particular alignment to pay attention to? |
|
| Author: | okredleggs [ Sun Mar 24, 2019 4:22 pm ] |
| Post subject: | Re: Lower Unit Gear Alignment |
Here is a pic of the gear at head of prop shaft; it had the lower upper bearing for dinner whch I have now replaced. Think I should replace this gear also or anybody think its critical?? Thanks. |
|
| Author: | Russ [ Sun Mar 24, 2019 5:31 pm ] |
| Post subject: | Re: Lower Unit Gear Alignment |
Replace it. Sent from my SM-G970U using Tapatalk |
|
| Author: | Buzz Killington [ Sun Mar 24, 2019 5:34 pm ] |
| Post subject: | Re: Lower Unit Gear Alignment |
X2 on replace it That's a problem waiting to happen Support your troops. We support you. B. |
|
| Author: | okredleggs [ Sun Mar 24, 2019 6:09 pm ] |
| Post subject: | Re: Lower Unit Gear Alignment |
Roger that. |
|
| Author: | Wchauvin [ Sun Mar 24, 2019 6:13 pm ] |
| Post subject: | Re: Lower Unit Gear Alignment |
Yeah that needs replacing bad |
|
| Author: | okredleggs [ Mon Mar 25, 2019 7:59 pm ] |
| Post subject: | Re: Lower Unit Gear Alignment |
PD no longer has this gear to order..it was made by curtis machine whhich no longer has them in inventory and does not make. Anybody know a machine shop that could reengineer? Or know somebody that may have Gen 1 LU with parts? Open to any ideas..? |
|
| Author: | jc [ Tue Mar 26, 2019 6:06 pm ] |
| Post subject: | Re: Lower Unit Gear Alignment |
Maybe you will get lucky and find someone with some parts. If not I bet having one made would be very expensive. If it was mine and I couldn't find some used parts I would run it, but plan on getting a new lower unit. |
|
| Author: | Bigjakewelch [ Wed Mar 27, 2019 10:22 pm ] |
| Post subject: | Re: Lower Unit Gear Alignment |
A good shop could repair that one for a couple hundred bucks. Sent from my SAMSUNG-SM-G930A using Tapatalk |
|
| Author: | dead animal [ Sat Mar 30, 2019 5:43 pm ] |
| Post subject: | Re: Lower Unit Gear Alignment |
maybe mudbuddy has some old pd clones u could buy from them, seeing as they stopped that goat roping and went on to copy gaytortail. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|