| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Prodrive leak http://mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=74530 |
Page 1 of 1 |
| Author: | yup [ Sun Sep 08, 2019 4:06 pm ] |
| Post subject: | Prodrive leak |
1st gen. See attached pictures. Think it might be a seal. Let me know what y’all think. Sent from my iPad using Tapatalk |
|
| Author: | banded-mallard [ Mon Sep 09, 2019 4:06 am ] |
| Post subject: | Re: Prodrive leak |
If its a gen 1 then most likely your prop nut seals. Also, the gen 1 came with a prop nut with only 2 seals, there is an upgraded prop nut (at least there was for the gen 2) that allowed for 3 seals placed in a certain orientation. Call PD and see if you can get the update propnut. When I update the gen 2 I had, the upgrade was free. I simply gave them my old prop nut and they sent me the new one. |
|
| Author: | Wchauvin [ Mon Sep 09, 2019 6:09 am ] |
| Post subject: | Re: Prodrive leak |
^ how did I know you would have a solution for this, banded lol |
|
| Author: | Will [ Mon Sep 09, 2019 7:58 am ] |
| Post subject: | Re: Prodrive leak |
Another thing it could be, The old ones also had a vent in the top of the splined shaft that the motor coupler sits on. They used to think it needed to be vented like a truck differential but realized it does not and they were prone let water in from the top. Yours could be coming out there. You can pull the motor and plug that hole. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|