It is currently Fri Mar 29, 2024 1:40 am




Reply to topic  [ 21 posts ] 
 Cutting the skeg? 
Author Message
MMT Pro Member

Joined: Mon Jun 06, 2016 2:47 pm
Posts: 57
Post Cutting the skeg?
I saw a post by Willie Fast the other day about cutting the skeg a bit to get more water to the prop. I looked up the performance skeg and it appears a simple cut should do it but I don’t want to go grinding away on my skeg.

I also want to hear some feed back with people with experience with it and if it’s really worth the hassle.

I’ve got a 2018 GTR37 XD for reference.


Mon Dec 09, 2019 9:30 pm
Profile
MMT 1000 Club

Joined: Sat Sep 30, 2017 7:10 pm
Posts: 1872
Post Re: Cutting the skeg?
It’s worth it. Willey’s templet is the correct one for performance. It really makes a little difference when paired with a worked prop but only after the skeg has been cut. Don’t get a prop worked and then cut the skeg because it changes the working rpms


Tue Dec 10, 2019 7:46 pm
Profile
MMT Elite Member
User avatar

Joined: Wed Sep 21, 2011 2:53 pm
Posts: 5077
Location: The duck Mecca called Ga!
Post Re: Cutting the skeg?
Where did you see this post? Link? Thx

Sent from my SM-G973U using Tapatalk

_________________
HOTSAUCE170 wrote:
I've never gone to Seminole for the amenities/luxury the two reasons I go down there are to kill shit and get fucked up with like minded individuals aka OG'S. If you want to swirl wine and stay in a room where politics and investment diversity are discussed (with no roaches) lake lanier is near Atlanta. If you wanna have an awesome time and maybe stay in a room where children were conceived on one side and someone got stabbed over an 8-ball on the other come on down I got a can of raid. :D


Sun Dec 15, 2019 6:06 am
Profile
MMT Pro Member

Joined: Mon Jun 06, 2016 2:47 pm
Posts: 57
Post Re: Cutting the skeg?
If you google, Willie Fast Performance Prop, it’ll bring up his Facebook post. I have a screenshot I’ll post


You do not have the required permissions to view the files attached to this post.


Mon Dec 16, 2019 2:00 pm
Profile
MMT Elite Member
User avatar

Joined: Wed Sep 21, 2011 2:53 pm
Posts: 5077
Location: The duck Mecca called Ga!
Post Re: Cutting the skeg?
Thanks. Prob not much to be done with the cast skeg I'm guessing.

Sent from my SM-G973U using Tapatalk

_________________
HOTSAUCE170 wrote:
I've never gone to Seminole for the amenities/luxury the two reasons I go down there are to kill shit and get fucked up with like minded individuals aka OG'S. If you want to swirl wine and stay in a room where politics and investment diversity are discussed (with no roaches) lake lanier is near Atlanta. If you wanna have an awesome time and maybe stay in a room where children were conceived on one side and someone got stabbed over an 8-ball on the other come on down I got a can of raid. :D


Mon Dec 16, 2019 2:07 pm
Profile
MMT Pro Member

Joined: Mon Jun 06, 2016 2:47 pm
Posts: 57
Post Re: Cutting the skeg?
I actually went ahead and did this. A new skeg is only $65 so I figured it was worth the risk. Haven’t had a chance to test the performance or speed increase but it was pretty simple to remove the lower skeg bolts and make the cut and sand it smooth. Took maybe 45 minutes


You do not have the required permissions to view the files attached to this post.


Mon Dec 16, 2019 2:23 pm
Profile
MMT Pro Member

Joined: Sun May 22, 2016 10:32 am
Posts: 334
Location: Middle ga
Post Re: Cutting the skeg?
Takes 5 min to do so I figured it’s worth a shot. With a stock 40xd motor and stock prop I didn’t really gain any performance, it did hurt. I have a prop getting worked now so I’ll update when I run it.


Mon Dec 16, 2019 2:42 pm
Profile
MMT Elite Member

Joined: Fri Jul 08, 2011 1:54 pm
Posts: 8133
Post Re: Cutting the skeg?
I did this years ago on the Prodrive to allow more vegetation and muck to the prop for 4wd but I guess you open water gtr pirates wouldn't know about that. :lol:

Sent from my Pixel 2 using Tapatalk

_________________
Before the internet, the majority of the village idiots stayed in their villages.


Mon Dec 16, 2019 8:15 pm
Profile
MMT Pro Member

Joined: Mon Jun 06, 2016 2:47 pm
Posts: 57
Post Re: Cutting the skeg?
You know I looked into getting a Prodrive once, but I don’t have a vagina so I got a Gatortail :mrgreen:

#cantbuyunderwearballsdontfit


Mon Dec 16, 2019 10:41 pm
Profile
MMT F.E.

Joined: Mon Jul 14, 2014 8:19 am
Posts: 981
Post Cutting the skeg?


Mon Dec 16, 2019 10:59 pm
Profile
MMT Pro Member

Joined: Mon Jun 06, 2016 2:47 pm
Posts: 57
Post Re: Cutting the skeg?
If I asked for a good comeback, I’d scrape it off your mother’s teeth.

But I am glad you took the time to look up my post to see I have a Havoc :lol:


Tue Dec 17, 2019 12:06 am
Profile
MMT 1000 Club

Joined: Mon Dec 31, 2012 11:07 pm
Posts: 4820
Location: West Monroe, LA
Post Re: Cutting the skeg?
O_o

#CFFITR
#GhostBoat
#Whoneedsphysicsihaveamudmotor


Tue Dec 17, 2019 7:50 am
Profile
MMT 1000 Club

Joined: Sat Sep 30, 2017 7:10 pm
Posts: 1872
Post Re: Cutting the skeg?
Recklessness :lol:


Tue Dec 17, 2019 8:14 am
Profile
MMT 1000 Club
User avatar

Joined: Thu Nov 04, 2010 7:38 am
Posts: 4323
Location: Cut Off, La.
Post Re: Cutting the skeg?
BuT I CaN BaCk Up In DeEp WaTeR :roll:

_________________
Refurbishing a Prodrive


Tue Dec 17, 2019 8:33 am
Profile
MMT Elite Member
User avatar

Joined: Wed Sep 21, 2011 2:53 pm
Posts: 5077
Location: The duck Mecca called Ga!
Post Re: Cutting the skeg?
I ain't waiting for that lower to spin around wiggling thru this shit, hydro or ratchet either one. It's all about what you need for where you play

Sent from my SM-G973U using Tapatalk

_________________
HOTSAUCE170 wrote:
I've never gone to Seminole for the amenities/luxury the two reasons I go down there are to kill shit and get fucked up with like minded individuals aka OG'S. If you want to swirl wine and stay in a room where politics and investment diversity are discussed (with no roaches) lake lanier is near Atlanta. If you wanna have an awesome time and maybe stay in a room where children were conceived on one side and someone got stabbed over an 8-ball on the other come on down I got a can of raid. :D


Wed Dec 18, 2019 8:26 am
Profile
MMT F.E.
User avatar

Joined: Thu Jan 15, 2009 6:35 pm
Posts: 935
Location: South LA
Post Re: Cutting the skeg?
Does anyone have a template for a modified Prodrive skeg?


Fri Dec 20, 2019 1:13 pm
Profile
MMT Pro Member

Joined: Mon Jun 06, 2016 2:47 pm
Posts: 57
Post Re: Cutting the skeg?
Can you send a picture of your skeg? From what I can tell from mine, the part I can out lines up even with my prop just so water can use the whole prop. If you send a pic I may be able to help you out. You also might be able to message Willie Fast and see what he says since he actually knows what he’s doing :D


Fri Dec 20, 2019 6:20 pm
Profile
MMT 1000 Club

Joined: Thu Nov 19, 2009 1:46 pm
Posts: 1210
Post Re: Cutting the skeg?


Mon Dec 23, 2019 5:09 pm
Profile
MMT Elite Member

Joined: Fri Jul 08, 2011 1:54 pm
Posts: 8133
Post Re: Cutting the skeg?

_________________
Before the internet, the majority of the village idiots stayed in their villages.


Mon Dec 23, 2019 9:04 pm
Profile
MMT Elite Member

Joined: Fri Jul 08, 2011 1:54 pm
Posts: 8133
Post Re: Cutting the skeg?
Here my old one, cut cavitation plate and modded skeg

Sent from my Pixel 2 using Tapatalk

_________________
Before the internet, the majority of the village idiots stayed in their villages.


Mon Dec 23, 2019 9:09 pm
Profile
MMT Pro Member

Joined: Mon Jun 06, 2016 2:47 pm
Posts: 57
Post Re: Cutting the skeg?
Wanted to post an update since I got to take a test run on flat water and see what the difference was.

Flat water with no current I saw again of roughly 1.5-2mph. The biggest difference was it made it a lot easier to steer with my tiller handle and seemed to take some of the torque and push I always had. Only downside, which really isn’t one, is the rooster tail isn’t as “wide” as before, but it’s still pretty high. Overall I’m pretty stoked with the results.


Fri Jan 03, 2020 1:11 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 21 posts ] 

Who is online

Users browsing this forum: No registered users and 163 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: