Author |
Message |
AKA Freshwaterkilla
MMT Elite Member
Joined: Sun Jul 29, 2012 12:06 pm Posts: 6584
|
 Re: New Rig by dfou & Calen
|
Sun Nov 24, 2013 8:43 pm |
|
 |
Gameover
MMT 1000 Club
Joined: Tue Jan 03, 2012 9:06 am Posts: 3673 Location: Prarieville,LA
|
 Re: New Rig by dfou & Calen
Money for what? Ain't like u got much to be gambling with anyways...Didn't say my boat was fast but 30.8 ain't fast. Quit niggerin up the thread like u got something Stupid inbred fucker.
_________________ 1754 GTR Xtreme CC w/ Purple Kool-aid Additives
Never Forget our Fallen Soliders
|
Sun Nov 24, 2013 8:52 pm |
|
 |
ARguide
MMT Pro Member
Joined: Tue Jul 09, 2013 10:42 pm Posts: 372 Location: AR
|
 Re: New Rig by dfou & Calen
All I'm saying is considering the size and how the boat is built I think it's runnin great. And the motor has the torque and power to handle the boat even with a load. I didn't want a racin' rig, I had one of them. I wanted a big strong boat with a stout motor that would be used hunting, fishing, and workin that would preform well and it does. It's kinda like comparing a ton diesel truck to a sports car.
Thanks Calen and Daniel!!!!
|
Sun Nov 24, 2013 8:57 pm |
|
 |
cupped up
MMT 1000 Club
Joined: Tue Jun 05, 2012 7:25 pm Posts: 4205 Location: St. Amant, LA
|
 Re: New Rig by dfou & Calen
|
Sun Nov 24, 2013 9:11 pm |
|
 |
dfou
MMT 1000 Club
Joined: Sun Dec 12, 2010 12:38 am Posts: 3986 Location: Pville, La
|
 Re: New Rig by dfou & Calen
|
Sun Nov 24, 2013 9:14 pm |
|
 |
diddyduck
MMT 1000 Club
Joined: Mon Sep 02, 2013 10:24 pm Posts: 2624 Location: ponchatoula, la
|
 Re: New Rig by dfou & Calen
|
Sun Nov 24, 2013 9:16 pm |
|
 |
dfou
MMT 1000 Club
Joined: Sun Dec 12, 2010 12:38 am Posts: 3986 Location: Pville, La
|
 Re: New Rig by dfou & Calen
And if that's all the current the calumet has then y'all way oversell that BS. Unless the water is high the amite is little to no current. Don't be mad that he has a battleship that will run with your light boat. Did I mention the motor has 6 mins on it? It's not even broken in yet
Sent from my iPhone using
|
Sun Nov 24, 2013 9:17 pm |
|
 |
cupped up
MMT 1000 Club
Joined: Tue Jun 05, 2012 7:25 pm Posts: 4205 Location: St. Amant, LA
|
 Re: New Rig by dfou & Calen
|
Sun Nov 24, 2013 9:19 pm |
|
 |
AKA Freshwaterkilla
MMT Elite Member
Joined: Sun Jul 29, 2012 12:06 pm Posts: 6584
|
 Re: New Rig by dfou & Calen
|
Sun Nov 24, 2013 9:20 pm |
|
 |
Gameover
MMT 1000 Club
Joined: Tue Jan 03, 2012 9:06 am Posts: 3673 Location: Prarieville,LA
|
 Re: New Rig by dfou & Calen
Like how u crop those 4 limits out that picture bc u ain't killed shit yet with your boatless broke ass with no money for gas. Here real picture something u ain't shot this year.
ImageUploadedByTapatalk1385351368.864651.jpg
You do not have the required permissions to view the files attached to this post.
_________________ 1754 GTR Xtreme CC w/ Purple Kool-aid Additives
Never Forget our Fallen Soliders
|
Sun Nov 24, 2013 9:50 pm |
|
 |
AKA Freshwaterkilla
MMT Elite Member
Joined: Sun Jul 29, 2012 12:06 pm Posts: 6584
|
 Re: New Rig by dfou & Calen
|
Sun Nov 24, 2013 9:58 pm |
|
 |
VooDoo Daddy
MMT 1000 Club
Joined: Sun Mar 17, 2013 6:55 pm Posts: 2005
|
 Re: New Rig by dfou & Calen
_________________ VooDoo--what you get when you leave your Voo outside all night long.
|
Sun Nov 24, 2013 10:00 pm |
|
 |
ARguide
MMT Pro Member
Joined: Tue Jul 09, 2013 10:42 pm Posts: 372 Location: AR
|
 Re: New Rig by dfou & Calen
|
Sun Nov 24, 2013 10:19 pm |
|
 |
ARguide
MMT Pro Member
Joined: Tue Jul 09, 2013 10:42 pm Posts: 372 Location: AR
|
 Re: New Rig by dfou & Calen
I gotta get some boat letters & numbers. Any suggestions? How long does it take to get some from the MMT store?
|
Sun Nov 24, 2013 10:27 pm |
|
 |
AKA Freshwaterkilla
MMT Elite Member
Joined: Sun Jul 29, 2012 12:06 pm Posts: 6584
|
 Re: New Rig by dfou & Calen
|
Sun Nov 24, 2013 10:37 pm |
|
 |
ARguide
MMT Pro Member
Joined: Tue Jul 09, 2013 10:42 pm Posts: 372 Location: AR
|
 Re: New Rig by dfou & Calen
I'll be sure and ask him.
|
Sun Nov 24, 2013 10:48 pm |
|
 |
PhilD
MMT Pro Member
Joined: Wed Mar 20, 2013 12:24 pm Posts: 329 Location: Grande Prairie, Alberta Nothern Canada
|
 Re: New Rig by dfou & Calen
|
Mon Nov 25, 2013 2:27 am |
|
 |
Swampnuts
MMT 1000 Club
Joined: Wed Dec 12, 2012 3:12 pm Posts: 1504 Location: St.Amant,LA
|
 Re: New Rig by dfou & Calen
_________________ 16X48 WELDBILT -25GTR EFI-sold 18x48 GTB - 35 GTR
Crown royal pro-staff
|
Mon Nov 25, 2013 6:20 am |
|
 |
Bigrich
MMT Elite Member
Joined: Wed Dec 19, 2012 7:52 pm Posts: 7064 Location: Mallard country
|
 Re: New Rig by dfou & Calen
Camo job looks great also! Is that one of takes'em clutch cover or did Daniel build it?
And it's funny reading this how always seems to be that person who always has to try and knock somebody's rig or something they have on here! Almost seems like jealousy and that's the only way they can show it is to bash other peoples stuff.............. But may be one day we will all have as nice and fast as rig as you do .........
I know what my rig runs with one, two, and three people in river with a built motor! And I don't see the numbers that other guys see with less mods......... but also my hull is different then most but I also had it built to run timber! So I would say that is some good speeds and should be very happy with them!
Daniel and Tom it's a very IMPRESSIVE rig all way around good job!
|
Mon Nov 25, 2013 7:22 am |
|
 |
Gameover
MMT 1000 Club
Joined: Tue Jan 03, 2012 9:06 am Posts: 3673 Location: Prarieville,LA
|
 Re: New Rig by dfou & Calen
_________________ 1754 GTR Xtreme CC w/ Purple Kool-aid Additives
Never Forget our Fallen Soliders
|
Mon Nov 25, 2013 7:53 am |
|
 |
Bigrich
MMT Elite Member
Joined: Wed Dec 19, 2012 7:52 pm Posts: 7064 Location: Mallard country
|
 Re: New Rig by dfou & Calen
Well sounds like it runs faster then your stage two with speeds of 28-29 with 2 ppl and 1/2 the hull but I guess u can always argue with a GPS
|
Mon Nov 25, 2013 8:15 am |
|
 |
nasty
MMT 1000 Club
Joined: Thu Oct 04, 2012 7:36 am Posts: 1290
|
 Re: New Rig by dfou & Calen
|
Mon Nov 25, 2013 8:45 am |
|
 |
nasty
MMT 1000 Club
Joined: Thu Oct 04, 2012 7:36 am Posts: 1290
|
 Re: New Rig by dfou & Calen
|
Mon Nov 25, 2013 8:45 am |
|
 |
Gameover
MMT 1000 Club
Joined: Tue Jan 03, 2012 9:06 am Posts: 3673 Location: Prarieville,LA
|
 Re: New Rig by dfou & Calen
_________________ 1754 GTR Xtreme CC w/ Purple Kool-aid Additives
Never Forget our Fallen Soliders
|
Mon Nov 25, 2013 9:02 am |
|
 |
dfou
MMT 1000 Club
Joined: Sun Dec 12, 2010 12:38 am Posts: 3986 Location: Pville, La
|
 Re: New Rig by dfou & Calen
|
Mon Nov 25, 2013 9:14 am |
|
 |
Gameover
MMT 1000 Club
Joined: Tue Jan 03, 2012 9:06 am Posts: 3673 Location: Prarieville,LA
|
 Re: New Rig by dfou & Calen
you apparently dont do math very well, maybe u and jason went to the same school. if i have HALF the hull and i said 1400# what is 1400/2. last time i checked that is 700# 
_________________ 1754 GTR Xtreme CC w/ Purple Kool-aid Additives
Never Forget our Fallen Soliders
|
Mon Nov 25, 2013 9:18 am |
|
 |
dfou
MMT 1000 Club
Joined: Sun Dec 12, 2010 12:38 am Posts: 3986 Location: Pville, La
|
 Re: New Rig by dfou & Calen
We ran it next to a 2050 1/8" boat with Hoyt heads, carb and exhaust and toms boat would walk off and leave that boat. I don't care what the speeds are but that's two similar boats in the exact same conditions and toms walked on it. I was impressed.
Sent from my iPhone using
|
Mon Nov 25, 2013 9:19 am |
|
 |
dfou
MMT 1000 Club
Joined: Sun Dec 12, 2010 12:38 am Posts: 3986 Location: Pville, La
|
 Re: New Rig by dfou & Calen
|
Mon Nov 25, 2013 9:23 am |
|
 |
nasty
MMT 1000 Club
Joined: Thu Oct 04, 2012 7:36 am Posts: 1290
|
 Re: New Rig by dfou & Calen
There's a lot of guys ovulating this morning
|
Mon Nov 25, 2013 9:24 am |
|
 |
Gameover
MMT 1000 Club
Joined: Tue Jan 03, 2012 9:06 am Posts: 3673 Location: Prarieville,LA
|
 Re: New Rig by dfou & Calen
_________________ 1754 GTR Xtreme CC w/ Purple Kool-aid Additives
Never Forget our Fallen Soliders
|
Mon Nov 25, 2013 9:27 am |
|
 |
Bigrich
MMT Elite Member
Joined: Wed Dec 19, 2012 7:52 pm Posts: 7064 Location: Mallard country
|
 Re: New Rig by dfou & Calen
|
Mon Nov 25, 2013 9:32 am |
|
 |
AKA Freshwaterkilla
MMT Elite Member
Joined: Sun Jul 29, 2012 12:06 pm Posts: 6584
|
 Re: New Rig by dfou & Calen
|
Mon Nov 25, 2013 9:33 am |
|
 |
Gameover
MMT 1000 Club
Joined: Tue Jan 03, 2012 9:06 am Posts: 3673 Location: Prarieville,LA
|
 Re: New Rig by dfou & Calen
_________________ 1754 GTR Xtreme CC w/ Purple Kool-aid Additives
Never Forget our Fallen Soliders
|
Mon Nov 25, 2013 9:38 am |
|
 |
dfou
MMT 1000 Club
Joined: Sun Dec 12, 2010 12:38 am Posts: 3986 Location: Pville, La
|
 New Rig by dfou & Calen
|
Mon Nov 25, 2013 9:40 am |
|
 |
dfou
MMT 1000 Club
Joined: Sun Dec 12, 2010 12:38 am Posts: 3986 Location: Pville, La
|
 Re: New Rig by dfou & Calen
Half the motor? You have heads carbs exhaust right?
Sent from my iPhone using
|
Mon Nov 25, 2013 9:41 am |
|
 |
Gameover
MMT 1000 Club
Joined: Tue Jan 03, 2012 9:06 am Posts: 3673 Location: Prarieville,LA
|
 Re: New Rig by dfou & Calen
_________________ 1754 GTR Xtreme CC w/ Purple Kool-aid Additives
Never Forget our Fallen Soliders
|
Mon Nov 25, 2013 9:42 am |
|
 |
Gameover
MMT 1000 Club
Joined: Tue Jan 03, 2012 9:06 am Posts: 3673 Location: Prarieville,LA
|
 Re: New Rig by dfou & Calen
[/quote]
It will do everything your light boat will do
Sent from my iPhone using [/quote] so i guess i have an impressive boat to once they do the same thing according to your standards. hmmmm
_________________ 1754 GTR Xtreme CC w/ Purple Kool-aid Additives
Never Forget our Fallen Soliders
|
Mon Nov 25, 2013 9:45 am |
|
 |
AKA Freshwaterkilla
MMT Elite Member
Joined: Sun Jul 29, 2012 12:06 pm Posts: 6584
|
 Re: New Rig by dfou & Calen
|
Mon Nov 25, 2013 9:45 am |
|
 |
AKA Freshwaterkilla
MMT Elite Member
Joined: Sun Jul 29, 2012 12:06 pm Posts: 6584
|
 Re: New Rig by dfou & Calen
|
Mon Nov 25, 2013 9:46 am |
|
 |
Bigrich
MMT Elite Member
Joined: Wed Dec 19, 2012 7:52 pm Posts: 7064 Location: Mallard country
|
 Re: New Rig by dfou & Calen
|
Mon Nov 25, 2013 9:46 am |
|
 |
|