Gonna be exciting for sure. Oh I know you can drive it, Im just sayin, I dont think Ive ever seen a modded motor on a boat that size. You just might be able to make it all the way across that spot where it took 7 boats to pull the turtle across.
| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| 16x46 Uncle J Skiff w/ 35hp GTR http://mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=23963 |
Page 1 of 2 |
| Author: | UNCLE-J [ Sat Nov 12, 2011 7:46 pm ] |
| Post subject: | 16x46 Uncle J Skiff w/ 35hp GTR |
2011. 15'8" x 46" Uncle J Mini-Me Edition Skiff. All 1/8th Construction 21" sides 10"x5" Hunt Deck Fully welded in floor 2009 35hp GTR 101 Hours Everything stock but Prop Tiger Prop Test Run Results: 12 gallon Gas Deep Water 2 - People. 190# ea Held at 29.8 MPH Today I was able to take the Mini-Me Edition out. I am unsure if engine is performing 100% of it's ability. I ran it on the middle pin. I was still able to trim without losing speed when I maxed out trim. At that point, Motor was turning 4050 RPM's. |
|
| Author: | dog walker [ Sat Nov 12, 2011 9:34 pm ] |
| Post subject: | Re: 16x46 Uncle J Skiff w/ 35hp GTR |
Put a GT prop on it and you will get more speed out of it if that's what you are looking for. Move the pin to the top if you want just to see what is the most you she will put out. Just move it down when you get in crap. |
|
| Author: | T-Bubba [ Sun Nov 13, 2011 6:14 am ] |
| Post subject: | Re: 16x46 Uncle J Skiff w/ 35hp GTR |
Is this the first skiff with a hunt deck? Looks good. Built you a tank for the front and butt it up on the deck |
|
| Author: | naj [ Sun Nov 13, 2011 7:50 am ] |
| Post subject: | Re: 16x46 Uncle J Skiff w/ 35hp GTR |
| Author: | UNCLE-J [ Sun Nov 13, 2011 11:14 am ] |
| Post subject: | 16x46 Uncle J Skiff w/ 35hp GTR |
It is the first skiff with a Hunt Deck that we have made. (I think. LOL) We have added hunt decks to many boats. Tenpoints was the firs skiff with one added two. I'm looking forward to trying the factory prop. Also, with the mods that I'm having done, I'm interested in seeing how stuck I can get it. If anyone can, I know I can!!! |
|
| Author: | b_coonass [ Sun Nov 13, 2011 4:33 pm ] |
| Post subject: | Re: 16x46 Uncle J Skiff w/ 35hp GTR |
Stage 1! |
|
| Author: | Tenpoint [ Sun Nov 13, 2011 4:36 pm ] |
| Post subject: | Re: 16x46 Uncle J Skiff w/ 35hp GTR |
| Author: | UNCLE-J [ Sun Nov 13, 2011 7:41 pm ] |
| Post subject: | 16x46 Uncle J Skiff w/ 35hp GTR |
Come on man... I need a little credit. LOL |
|
| Author: | DeathMetalDukk [ Sun Nov 13, 2011 7:48 pm ] |
| Post subject: | Re: 16x46 Uncle J Skiff w/ 35hp GTR |
| Author: | Tenpoint [ Sun Nov 13, 2011 7:50 pm ] |
| Post subject: | Re: 16x46 Uncle J Skiff w/ 35hp GTR |
Gonna be exciting for sure. Oh I know you can drive it, Im just sayin, I dont think Ive ever seen a modded motor on a boat that size. You just might be able to make it all the way across that spot where it took 7 boats to pull the turtle across.
|
|
| Author: | UNCLE-J [ Sun Nov 13, 2011 9:28 pm ] |
| Post subject: | 16x46 Uncle J Skiff w/ 35hp GTR |
Going try it out in the AM... |
|
| Author: | T-Bubba [ Mon Nov 14, 2011 7:32 am ] |
| Post subject: | Re: 16x46 Uncle J Skiff w/ 35hp GTR |
YOu will get it stuck |
|
| Author: | UNCLE-J [ Mon Nov 14, 2011 8:30 am ] |
| Post subject: | 16x46 Uncle J Skiff w/ 35hp GTR |
No stuck... Just 12 duck |
|
| Author: | UNCLE-J [ Mon Nov 14, 2011 8:34 am ] |
| Post subject: | 16x46 Uncle J Skiff w/ 35hp GTR |
This is what we had to run through this morning... Picture Takem from Bridge on way home.. |
|
| Author: | pooldoo73 [ Mon Nov 14, 2011 1:35 pm ] |
| Post subject: | Re: 16x46 Uncle J Skiff w/ 35hp GTR |
Didn't need much of a blind this morning. Must have been a safe trip, wif all of 5 foot of visibility. |
|
| Author: | UNCLE-J [ Mon Nov 14, 2011 3:05 pm ] |
| Post subject: | 16x46 Uncle J Skiff w/ 35hp GTR |
LOL... Don't think we had that much |
|
| Author: | captskr [ Mon Nov 14, 2011 5:36 pm ] |
| Post subject: | Re: 16x46 Uncle J Skiff w/ 35hp GTR |
my uncle j skiff has a hunt deck 17/48 |
|
| Author: | b_coonass [ Mon Nov 14, 2011 5:39 pm ] |
| Post subject: | Re: 16x46 Uncle J Skiff w/ 35hp GTR |
| Author: | Tenpoint [ Mon Nov 14, 2011 5:45 pm ] |
| Post subject: | Re: 16x46 Uncle J Skiff w/ 35hp GTR |
| Author: | UNCLE-J [ Mon Nov 14, 2011 6:19 pm ] |
| Post subject: | 16x46 Uncle J Skiff w/ 35hp GTR |
Yep... I forgot about that one. LOL That the skiff that is Alabama |
|
| Author: | Quack Stackin [ Mon Nov 14, 2011 7:07 pm ] |
| Post subject: | Re: 16x46 Uncle J Skiff w/ 35hp GTR |
| Author: | poorboy1 [ Tue Nov 15, 2011 11:03 pm ] |
| Post subject: | Re: 16x46 Uncle J Skiff w/ 35hp GTR |
looks nice all this research im doin keeps addin more ideas in my brain. good thing hes a 100% custom builder. |
|
| Author: | UNCLE-J [ Wed Nov 16, 2011 4:39 am ] |
| Post subject: | 16x46 Uncle J Skiff w/ 35hp GTR |
Check out the Cadillac. That has about everything but the microwave feature. |
|
| Author: | wal1809 [ Wed Nov 16, 2011 8:39 am ] |
| Post subject: | Re: 16x46 Uncle J Skiff w/ 35hp GTR |
No update on the little skiff? Your prolly gonna have to weight that thing down for wide open throttle. That could be a fun show seeing it skipping across a mud flat. |
|
| Author: | UNCLE-J [ Wed Nov 16, 2011 9:23 am ] |
| Post subject: | 16x46 Uncle J Skiff w/ 35hp GTR |
Boat is working fine. I still never ran it alone. With two people, it runs good. Can't complain... |
|
| Author: | Beadlejuicejr [ Wed Nov 16, 2011 9:59 am ] |
| Post subject: | Re: 16x46 Uncle J Skiff w/ 35hp GTR |
The real question is how you like the motor compared to them pd |
|
| Author: | WestEndAngler [ Wed Nov 16, 2011 10:32 am ] |
| Post subject: | Re: 16x46 Uncle J Skiff w/ 35hp GTR |
| Author: | mcnemar1982 [ Wed Nov 16, 2011 2:05 pm ] |
| Post subject: | Re: 16x46 Uncle J Skiff w/ 35hp GTR |
| Author: | UNCLE-J [ Wed Nov 16, 2011 4:15 pm ] |
| Post subject: | 16x46 Uncle J Skiff w/ 35hp GTR |
It's actually called the Huey P. long bridge.. It's OLD!! |
|
| Author: | Noladucks1 [ Thu Nov 17, 2011 9:56 am ] |
| Post subject: | Re: 16x46 Uncle J Skiff w/ 35hp GTR |
Huey p in NOLA, i figured you were hunting the WAX |
|
| Author: | UNCLE-J [ Thu Nov 17, 2011 8:09 pm ] |
| Post subject: | 16x46 Uncle J Skiff w/ 35hp GTR |
Paint Scheme for my boat. |
|
| Author: | sela_native [ Fri Nov 18, 2011 11:38 am ] |
| Post subject: | Re: 16x46 Uncle J Skiff w/ 35hp GTR |
That paint is going to be nice! |
|
| Author: | UNCLE-J [ Fri Nov 18, 2011 11:53 am ] |
| Post subject: | 16x46 Uncle J Skiff w/ 35hp GTR |
And, it has a special silicone base coat on bottom. |
|
| Author: | Quack Habit [ Sat Jan 21, 2012 1:26 pm ] |
| Post subject: | Re: 16x46 Uncle J Skiff w/ 35hp GTR |
Nice little skiff Uncle J. Any idea how much the hull weighs? |
|
| Author: | autogateman [ Sat Jan 21, 2012 5:24 pm ] |
| Post subject: | Re: 16x46 Uncle J Skiff w/ 35hp GTR |
That wasnt very smart to make it 15 8 in my opinion. four inches longer and you wouldnt have to wear a lifejacket in LA (if you didnt want to) |
|
| Author: | lastchance [ Sat Jan 21, 2012 7:34 pm ] |
| Post subject: | Re: Re: 16x46 Uncle J Skiff w/ 35hp GTR |
| Author: | dfou [ Sat Jan 21, 2012 7:41 pm ] |
| Post subject: | 16x46 Uncle J Skiff w/ 35hp GTR |
| Author: | lastchance [ Sat Jan 21, 2012 7:44 pm ] |
| Post subject: | Re: Re: 16x46 Uncle J Skiff w/ 35hp GTR |
| Author: | cb5331 [ Sat Jan 21, 2012 7:53 pm ] |
| Post subject: | Re: 16x46 Uncle J Skiff w/ 35hp GTR |
Class A = Less than 16ft |
|
| Author: | POKER1 [ Sat Jan 21, 2012 7:58 pm ] |
| Post subject: | Re: 16x46 Uncle J Skiff w/ 35hp GTR |
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|