| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Speed question http://mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=25906 |
Page 1 of 1 |
| Author: | murph [ Thu Jan 19, 2012 12:26 am ] |
| Post subject: | Speed question |
29 hp mud buddy hyper drive on a 1650 alweld solo I'm about 22 to 24 mph but with another hunter and dog and gear getting about 14 mph just wondering if a new prop is in order or what y'all think ? Thanks |
|
| Author: | mizzippi jb [ Thu Jan 19, 2012 2:53 am ] |
| Post subject: | Re: Speed question |
biggest speed with load killer on a mudmotor is a hull that is not designed for a a mudmotor. I guarantee you there are a ton of folks on here who have learned that the hard way, including me. If you have a grizzly, war eagle, semi-v, whatever and are getting good performance with a mudmotor on the back, consider yourself VERY lucky. A 29 is a big block motor and on a 16 foot mud hull (with a good prop) would tote the mail with that load. |
|
| Author: | jp0242 [ Thu Jan 19, 2012 10:40 am ] |
| Post subject: | Re: Speed question |
ran 25 with 3 guys and hunting ld in a 1648 alweld with a 35 gdsd so I would say something is wrong Sent from my Motorola_i1 using Tapatalk |
|
| Author: | duckduckboom [ Thu Jan 19, 2012 11:38 am ] |
| Post subject: | Re: Speed question |
If your Rpms are not drastically low is would say your prop does need to be replaced |
|
| Author: | rebbeer [ Thu Jan 19, 2012 6:19 pm ] |
| Post subject: | Re: Speed question |
If you're running the stock prop that came with it, it's probably not a big blade. Get yourself a MB big blade and you should see a pretty significant difference. I had a 31hp MB with the small prop and had the same problems, switched to the big blade, and it made a world of difference. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|