MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
Finally settled on a new rig! ExcelF4 w/ MBBD 5500 http://mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=26016 |
Page 1 of 1 |
Author: | SCStrokin [ Mon Jan 23, 2012 2:25 pm ] |
Post subject: | Finally settled on a new rig! ExcelF4 w/ MBBD 5500 |
Mud Buddy Black Death 5500 Excel F4 18x54 I got the 2012 with .125 5086 aluminum so I am hoping I will have no issues with the stumps and timber we have where I hunt. So far I have run with 3 people around 180 pounds each and reached 33 with a cooler in deep water no wind and glassy.. I have hunted the boat with 2 and 3 people with full load of gear and had no problems pushing through the football field size patches of sawgrass and flooded timber here in South Carolina. this is the only picture I have at the moment but I will try to add more soon -Robert |
Author: | odass [ Mon Jan 23, 2012 2:51 pm ] |
Post subject: | Re: Finally settled on a new rig! ExcelF4 w/ MBBD 5500 |
Man that is like 4mph faster than we could get my buddies 1854 f4 with a 5500bd empty in deep water. |
Author: | odass [ Mon Jan 23, 2012 3:17 pm ] |
Post subject: | Re: Finally settled on a new rig! ExcelF4 w/ MBBD 5500 |
Does yours have a cam or high rev coils on it.or just stock bd |
Author: | Barroll [ Mon Jan 23, 2012 3:23 pm ] |
Post subject: | Re: Finally settled on a new rig! ExcelF4 w/ MBBD 5500 |
Author: | odass [ Mon Jan 23, 2012 3:25 pm ] |
Post subject: | Re: Finally settled on a new rig! ExcelF4 w/ MBBD 5500 |
Author: | SCmudder7071 [ Mon Jan 23, 2012 4:40 pm ] |
Post subject: | Re: Finally settled on a new rig! ExcelF4 w/ MBBD 5500 |
Author: | duramaxdiesel09 [ Mon Jan 23, 2012 4:44 pm ] |
Post subject: | Re: Finally settled on a new rig! ExcelF4 w/ MBBD 5500 |
Author: | SCStrokin [ Tue Jan 24, 2012 1:15 pm ] |
Post subject: | Re: Finally settled on a new rig! ExcelF4 w/ MBBD 5500 |
Well the results may be a little off because it was a river.. though it looks still the current still had to have some influence on the speed. Plus I am using a gps app on the droid so it may be somewhat off. Overall the boat is surprisingly fast and I am very happy with it. As soon as I get a better GPS and can hit the lake I will post new numbers. As for now duck season is more important ![]() |
Author: | take'emgator [ Tue Jan 24, 2012 2:53 pm ] |
Post subject: | Re: Finally settled on a new rig! ExcelF4 w/ MBBD 5500 |
I like running 33 with a load, you get places quicker |
Author: | SCStrokin [ Wed Feb 15, 2012 11:40 am ] |
Post subject: | Re: Finally settled on a new rig! ExcelF4 w/ MBBD 5500 |
I got a chance to run the boat with the same load minus the current and using an actual GPS. It was averaging 28 bumping a little higher when i hit shallow spots. The current must have really been pushing me the first run. So far the boat does everything I ask of it and I have only gotten really stuck once. I do wish I had gotten the winch built in, that seems like a useful option since I don't know many folks around here with mud rigs. |
Author: | SCmudder7071 [ Wed Feb 15, 2012 12:35 pm ] |
Post subject: | Re: Finally settled on a new rig! ExcelF4 w/ MBBD 5500 |
Author: | SCStrokin [ Wed Feb 15, 2012 1:20 pm ] |
Post subject: | Re: Finally settled on a new rig! ExcelF4 w/ MBBD 5500 |
Yeah I have seen quite a few in the lower half of the state but haven't done much networking. Where are you? |
Author: | SCmudder7071 [ Wed Feb 15, 2012 3:43 pm ] |
Post subject: | Re: Finally settled on a new rig! ExcelF4 w/ MBBD 5500 |
From upstate, in Chesterfield County. We go to the cooper quite a bit to ride when its warm and the tides are low. Next time we head down there ill be sure to pm ya |
Author: | CDMCHEVY07 [ Wed Feb 15, 2012 6:38 pm ] |
Post subject: | Re: Finally settled on a new rig! ExcelF4 w/ MBBD 5500 |
from berkeley county. live like 10 mins from cypress gardens. next time yall make a trip pm il ride out there |
Author: | romeocadet08 [ Wed Feb 15, 2012 7:51 pm ] |
Post subject: | Re: Finally settled on a new rig! ExcelF4 w/ MBBD 5500 |
Berkeley county also...fastest rig in the county KNO DAT |
Author: | CDMCHEVY07 [ Wed Feb 15, 2012 8:06 pm ] |
Post subject: | Re: Finally settled on a new rig! ExcelF4 w/ MBBD 5500 |
we need to get a ride goin. my motor is all stock so i aint winnin no races |
Author: | duramaxdiesel09 [ Wed Feb 15, 2012 8:09 pm ] |
Post subject: | Re: Finally settled on a new rig! ExcelF4 w/ MBBD 5500 |
Author: | SCmudder7071 [ Wed Feb 15, 2012 8:14 pm ] |
Post subject: | Re: Finally settled on a new rig! ExcelF4 w/ MBBD 5500 |
X2 on that duramax. He should be all over 25 in the shallows. Which is where I ride 95% of the time at 3/4 throttle |
Author: | CDMCHEVY07 [ Wed Feb 15, 2012 8:16 pm ] |
Post subject: | Re: Finally settled on a new rig! ExcelF4 w/ MBBD 5500 |
i mean it runs pretty good. i havent really ran an empty boat though. ive always had somethin in it. if i go this weekend i will get some speeds. but if the conditions are right i think i could hit low 30s. but alot of time it wants to bounce of the rev limiter. |
Author: | SCmudder7071 [ Wed Feb 15, 2012 8:21 pm ] |
Post subject: | Re: Finally settled on a new rig! ExcelF4 w/ MBBD 5500 |
I know what you saying bud. Since Sept my boat stayed loaded down with dekes, bag, trash, etc. I cleaned it out this past week, took it for a spin and forgot what it felt like to ride at 30mph |
Author: | CDMCHEVY07 [ Wed Feb 15, 2012 8:27 pm ] |
Post subject: | Re: Finally settled on a new rig! ExcelF4 w/ MBBD 5500 |
yea i finally got it cleaned out since duck season is over. its nice to have a clean boat! but if yall come down anytime soon give me a shout on here |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |