BAWAAAHAHAHAHAHAHAHA!!!
They'll never kill the gorf!!!
Sorry, guess i wasn't paying attention re pics.
| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| 1854 Uncle J http://mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=29727 |
Page 1 of 2 |
| Author: | DirtNasty [ Wed Jun 06, 2012 1:55 pm ] |
| Post subject: | 1854 Uncle J |
1854 3/16/" bottom 24" sides wide gunnel custom boxes full floor. sport deck 36 pro drive 26gps avg me (230) and dog 10 gallons. 21 avg me 2 other guys light gear Also has removable gun box. Still have to get canvas flap made to cover gas tank, and need some driving lights...any ideas. Had the boat for a few months now. Put some hours on it and have really enjoyed it. Jason did a great job on it. It was my first build and I'm happy with it. Only change I would make would be a shorter rake. Not knowing I asked for a long rake but think the shorter rake would help me on getting up to speed. Boat is a tank and I don't have to worry about running the stumps. Now just need to do some mods to the motor to go a bit faster. But that will have to wait till next year probably. Will post some more pics later |
|
| Author: | Docott [ Wed Jun 06, 2012 1:59 pm ] |
| Post subject: | Re: 1854 Uncle J |
looks great! more pics? |
|
| Author: | CAJUN OUTLAW [ Wed Jun 06, 2012 2:02 pm ] |
| Post subject: | Re: 1854 Uncle J |
those are decent speeds for that big rig and stock motor. looks like you are one of the few who dont just add a couple mph. |
|
| Author: | DirtNasty [ Wed Jun 06, 2012 2:14 pm ] |
| Post subject: | Re: 1854 Uncle J |
ya why do that when everybody knows you're are full of shit! Now... I did hit 45 mph pulling a wakeboard!! LMAO. but really its not to bad when its just me I ran it for 2 hours yesterday on big water and it seemed fast enough but when you put another guy in there its night and day. I like speed so I need about 50 horses to be satisfied. |
|
| Author: | OwenDickeson [ Wed Jun 06, 2012 2:15 pm ] |
| Post subject: | Re: 1854 Uncle J |
$$$ |
|
| Author: | CootSlayerRMFT [ Wed Jun 06, 2012 2:20 pm ] |
| Post subject: | Re: 1854 Uncle J |
| Author: | Docott [ Wed Jun 06, 2012 2:24 pm ] |
| Post subject: | Re: 1854 Uncle J |
BAWAAAHAHAHAHAHAHAHA!!! They'll never kill the gorf!!! Sorry, guess i wasn't paying attention re pics. |
|
| Author: | CootSlayerRMFT [ Wed Jun 06, 2012 2:27 pm ] |
| Post subject: | Re: 1854 Uncle J |
How many letters must separate f, r, o, and g in a post in order to be within MMT law once the ban goes into effect? Did I cover it in my last post or would I still get my MMT license suspended for the minimum 90 days plus court costs? |
|
| Author: | Docott [ Wed Jun 06, 2012 3:30 pm ] |
| Post subject: | Re: 1854 Uncle J |
Well, I guess we'll FsReOeG |
|
| Author: | take'emgator [ Wed Jun 06, 2012 8:16 pm ] |
| Post subject: | Re: 1854 Uncle J |
Ya'll get off this dudes post with ya'lls BS, seriously get the fork out |
|
| Author: | oncall [ Wed Jun 06, 2012 9:42 pm ] |
| Post subject: | Re: 1854 Uncle J |
Nice looking boat. |
|
| Author: | PaleoHuntr [ Wed Jun 06, 2012 9:45 pm ] |
| Post subject: | Re: 1854 Uncle J |
^^ Agreed! I really like the look of the J boats. |
|
| Author: | DirtNasty [ Thu Jun 07, 2012 7:27 am ] |
| Post subject: | Re: 1854 Uncle J |
| Author: | txmudcutter [ Thu Jun 07, 2012 7:33 am ] |
| Post subject: | Re: 1854 Uncle J |
Nice rig! Really like the paint job |
|
| Author: | Docott [ Thu Jun 07, 2012 3:13 pm ] |
| Post subject: | Re: 1854 Uncle J |
Very nice 
|
|
| Author: | CAJUN OUTLAW [ Thu Jun 07, 2012 3:51 pm ] |
| Post subject: | Re: 1854 Uncle J |
dammit man,that vessel is almost as fine as mine 
|
|
| Author: | Docott [ Thu Jun 07, 2012 6:03 pm ] |
| Post subject: | Re: 1854 Uncle J |
I'd like to know more about the ledge/shelf under the catwalks. I've thought about that before. Would be a nice thing to put shells on, etc. can you post some close ups? |
|
| Author: | gfowel [ Thu Jun 07, 2012 6:16 pm ] |
| Post subject: | Re: 1854 Uncle J |
X2^ |
|
| Author: | UNCLE-J [ Thu Jun 07, 2012 6:21 pm ] |
| Post subject: | 1854 Uncle J |
That was a great idea. And, it is tucked away under catwalk. Due to flare in sides, it isn't even in the way while walking. |
|
| Author: | gfowel [ Thu Jun 07, 2012 6:26 pm ] |
| Post subject: | Re: 1854 Uncle J |
Great place to mount somee LED lighs. |
|
| Author: | muddoggie [ Thu Jun 07, 2012 6:35 pm ] |
| Post subject: | Re: 1854 Uncle J |
Very nice rig! Don't be disappointed with the long rake...a short rake actually hurts when you haul a load-- it tends to push water and makes it harder for your hull to ease up on pad. Take it from someone who wishes they had a long rake..... |
|
| Author: | Docott [ Thu Jun 07, 2012 8:09 pm ] |
| Post subject: | Re: 1854 Uncle J |
I want that on mine, J 
|
|
| Author: | Woodiebuster [ Thu Jun 07, 2012 8:42 pm ] |
| Post subject: | Re: 1854 Uncle J |
is it just me, or does the start of the rake look funky to yall? |
|
| Author: | Docott [ Thu Jun 07, 2012 9:01 pm ] |
| Post subject: | Re: 1854 Uncle J |
I agee, but I think it's the camera angle and the fact that the hull at that point is partially submerged. The profile/side shot doesn't look that way. |
|
| Author: | UNCLE-J [ Thu Jun 07, 2012 9:06 pm ] |
| Post subject: | 1854 Uncle J |
I seen what you are talking about. Though, I looked at some pictures of the start of the build, and I dont see it the same. I think it is a bit of shadow and or picture angle. The rakes are drawn out 1' more that what is intended to insure that it is a smooth transition. |
|
| Author: | BlueShamu [ Thu Jun 07, 2012 9:53 pm ] |
| Post subject: | Re: 1854 Uncle J |
I like the holes under the front deck for storing the spuds, too. Nice looking rig. I am sure looking forward to getting mine built! |
|
| Author: | OwenDickeson [ Thu Jun 07, 2012 10:02 pm ] |
| Post subject: | 1854 Uncle J |
The front looks like a banana. I really like the rear pods. Nice boat. |
|
| Author: | Ruddyduck [ Fri Jun 08, 2012 5:11 am ] |
| Post subject: | Re: 1854 Uncle J |
I kind of like the rake. The shelves are a great idea! Tell me this: How the hell is the tree with the winch held on that trailer? |
|
| Author: | Ruddyduck [ Fri Jun 08, 2012 5:12 am ] |
| Post subject: | Re: 1854 Uncle J |
Nevermind, just noticed the paddle sitting there. Made it look like the tree was off the side of the trailer. 
|
|
| Author: | GTB builder [ Fri Jun 08, 2012 6:02 am ] |
| Post subject: | Re: 1854 Uncle J |
Nice boat, I like how you got the inside set up. |
|
| Author: | DirtNasty [ Fri Jun 08, 2012 7:56 am ] |
| Post subject: | Re: 1854 Uncle J |
| Author: | DirtNasty [ Fri Jun 08, 2012 8:08 am ] |
| Post subject: | Re: 1854 Uncle J |
As far as the shelves. I love those things. I just throw my cell phone keys and gps in there and they ride good. Im gonna do led under them so I will have interior lighting. The boat is a long way from finished I just have to get some cash in my pocket. These damm kids are breaking me with the damm birthday parties every other week. AND J ....I want 10% on every shelf you install from now on LOL. |
|
| Author: | BROOKS [ Fri Jun 08, 2012 8:55 am ] |
| Post subject: | Re: 1854 Uncle J |
Them shelves Diffently Rock !!!! 3/16th Hull Rocks !!!! FTR ~ I thank UncleJ Rocks !!!! Bullard, Tx huh ? I mite git to see this rig in person someday .... |
|
| Author: | WestEndAngler [ Fri Jun 08, 2012 10:10 am ] |
| Post subject: | Re: 1854 Uncle J |
Love the shelves & catwalks. |
|
| Author: | UNCLE-J [ Fri Jun 08, 2012 10:32 am ] |
| Post subject: | 1854 Uncle J |
Ok.. Note to self. ADD 10% to cost of shelves.. LOL You get a whole $10.50 or something. I can handle that. |
|
| Author: | Joe M [ Wed Jun 27, 2012 2:27 pm ] |
| Post subject: | Re: 1854 Uncle J |
I think I did see this rig in person. Were you in a pond in a pasture on 69 in bullard? |
|
| Author: | Docott [ Thu Jun 28, 2012 4:53 pm ] |
| Post subject: | Re: 1854 Uncle J |
Would you post some more pics of the shelves and catwalks? Please
|
|
| Author: | brasso [ Thu Jun 28, 2012 9:45 pm ] |
| Post subject: | Re: 1854 Uncle J |
ha I used to live right next to you... Thats a nice boat! |
|
| Author: | DirtNasty [ Thu Jul 05, 2012 1:18 pm ] |
| Post subject: | Re: 1854 Uncle J |
| Author: | brasso [ Thu Jul 05, 2012 5:27 pm ] |
| Post subject: | Re: 1854 Uncle J |
Your Brookes brother arent you? |
|
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|