| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Stock 35gtr on 18x54 unc J LOADED DOWN http://mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=36062 |
Page 1 of 1 |
| Author: | dgalmo [ Sun Jan 06, 2013 10:31 am ] |
| Post subject: | Stock 35gtr on 18x54 unc J LOADED DOWN |
First time to really load the boat down. Had 5 guys, tons of gear and a full boat blind. Boat jumped up on plane nearly as quick as an unload boat. Didnt gps it, but probably only got around 18-20. Definitely impressed with the load carrying capabilities. Mostly in 12 in water. I think el jefe was impressed. |
|
| Author: | barnes_53 [ Sun Jan 06, 2013 11:02 am ] |
| Post subject: | Re: Stock 35gtr on 18x54 unc J LOADED DOWN |
Stock motor? Damn! |
|
| Author: | dgalmo [ Sun Jan 06, 2013 11:21 am ] |
| Post subject: | Re: Stock 35gtr on 18x54 unc J LOADED DOWN |
I should have added that it does have a MM exhaust and a brand new prop |
|
| Author: | eljefe [ Sun Jan 06, 2013 11:35 am ] |
| Post subject: | Re: Stock 35gtr on 18x54 unc J LOADED DOWN |
I was very impressed. I dont think we did 20 but its not far off of 19mph.....I think we were quicker with evryone sitting on side boxes balanced than with 2 on deck...... and i know my big decoy bag was stuffed and was at least 60 lbs.....all 5 guys were under 200# would be my guess but all above 165#.......i think Dustin was the most impressed....especially getting on plane almost imediately. |
|
| Author: | sela_native [ Sun Jan 06, 2013 11:58 am ] |
| Post subject: | Re: Stock 35gtr on 18x54 unc J LOADED DOWN |
How many rpms? |
|
| Author: | dgalmo [ Sun Jan 06, 2013 12:01 pm ] |
| Post subject: | Re: Stock 35gtr on 18x54 unc J LOADED DOWN |
Around 3500, usually get about 3750 with 2 guys and light gear. Oh, and I always have 14-18 gallons of gas in the deck |
|
| Author: | Barroll [ Sun Jan 06, 2013 1:16 pm ] |
| Post subject: | Re: Stock 35gtr on 18x54 unc J LOADED DOWN |
That's good to hear. I have a 1854 uncle j and am debating on getting a stock motor or just biting the bullet and getting a modded motor. |
|
| Author: | UNCLE-J [ Sun Jan 06, 2013 1:48 pm ] |
| Post subject: | Re: Stock 35gtr on 18x54 unc J LOADED DOWN |
Once you drive a Modded Motor, you will throw rocks at stock. The difference is UNREAL!! |
|
| Author: | CJB [ Sun Jan 06, 2013 3:49 pm ] |
| Post subject: | Re: Stock 35gtr on 18x54 unc J LOADED DOWN |
| Author: | skinnerton_outlaw [ Sun Jan 06, 2013 4:10 pm ] |
| Post subject: | Re: Stock 35gtr on 18x54 unc J LOADED DOWN |
| Author: | Barroll [ Sun Jan 06, 2013 4:58 pm ] |
| Post subject: | Re: Stock 35gtr on 18x54 unc J LOADED DOWN |
| Author: | take'emgator [ Sun Jan 06, 2013 6:13 pm ] |
| Post subject: | Re: Stock 35gtr on 18x54 unc J LOADED DOWN |
Doing heads, carb and exhaust on a 2011 GTR right now on the back of an uncle J. Jason you might remember him, Chris Flores. Should wake this little puppy up for the size boat its pushing |
|
| Author: | UNCLE-J [ Sun Jan 06, 2013 6:37 pm ] |
| Post subject: | Re: Stock 35gtr on 18x54 unc J LOADED DOWN |
Yep remember him |
|
| Author: | dozrya [ Sun Jan 06, 2013 6:50 pm ] |
| Post subject: | Re: Stock 35gtr on 18x54 unc J LOADED DOWN |
Definitely impressed with my boat this weekend. Ran very well! Just wish I had a wind shield on the way home this am. That rain hurt. |
|
| Author: | swampbilly [ Sun Jan 06, 2013 7:14 pm ] |
| Post subject: | Re: Stock 35gtr on 18x54 unc J LOADED DOWN |
| Author: | UNCLE-J [ Sun Jan 06, 2013 8:30 pm ] |
| Post subject: | Re: Stock 35gtr on 18x54 unc J LOADED DOWN |
| Author: | take'emgator [ Sun Jan 06, 2013 8:59 pm ] |
| Post subject: | Re: Stock 35gtr on 18x54 unc J LOADED DOWN |
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|