| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Speed http://mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=37344 |
Page 1 of 1 |
| Author: | ALCEE [ Thu Feb 07, 2013 2:30 pm ] |
| Post subject: | Speed |
I have a 18x54 with hunt deck rod box and a dry storage box two batteries and trolling motor pushed by stock 35GTR and was wondering if 23-24mph sounds about right(thats running with two people and nuthing else).I would like to get a little more speed but don't really know what would be my best option, such as carb, exhaust ect.. I was thinking about adding carb and exhaust but don't know what carb and which exhaust. Thanks for any help. |
|
| Author: | barnes_53 [ Thu Feb 07, 2013 2:37 pm ] |
| Post subject: | Re: Speed |
also, what is the condition of your prop and how many hours are on it? You're close to the speeds you would expect from this setup. |
|
| Author: | ALCEE [ Thu Feb 07, 2013 2:42 pm ] |
| Post subject: | Re: Speed |
Rpms are around 3700-3800 |
|
| Author: | ALCEE [ Thu Feb 07, 2013 2:44 pm ] |
| Post subject: | Re: Speed |
I have 27 hour on the motor |
|
| Author: | barnes_53 [ Thu Feb 07, 2013 2:45 pm ] |
| Post subject: | Re: Speed |
| Author: | txmudcutter [ Thu Feb 07, 2013 4:20 pm ] |
| Post subject: | Re: Speed |
What hole you running the pin in? Try putting it in the middle hole if your on the bottom hole now. |
|
| Author: | Old School [ Thu Feb 07, 2013 4:22 pm ] |
| Post subject: | Re: Speed |
Look close at prob, my first one only lasted 15hrs. U will learn as u go how to make a prop hast a few hours longer and crank up them RPM's |
|
| Author: | dirtybird29+ [ Thu Feb 07, 2013 4:27 pm ] |
| Post subject: | Re: Speed |
Is this a 1854 gator tail boat? |
|
| Author: | ALCEE [ Thu Feb 07, 2013 4:48 pm ] |
| Post subject: | Re: Speed |
The prop looks good and the boat was mad by shallow water customs |
|
| Author: | ALCEE [ Thu Feb 07, 2013 4:48 pm ] |
| Post subject: | Re: Speed |
And the pin is in the top hole |
|
| Author: | tchauvin [ Thu Feb 07, 2013 4:51 pm ] |
| Post subject: | Re: Speed |
| Author: | Team Camo [ Thu Feb 07, 2013 8:37 pm ] |
| Post subject: | Re: Speed |
Maybe 100 rpm low, & 1-2 mph low, at most. That's a lot to ask of a stock motor to get that heavy setup 27mph with 2 guys & gear. 1st, exhaust 2nd, heads 3rd, cam or carb (I like cam) & if that's not good enough for you, 4th, whichever you didn't do 3rd |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|