Cody at SETX PERFORMANCE. You'll thank me or should I say us later
Sent from my DROID RAZR using Tapatalk 2
| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| SETX motor mods? http://mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=37775 |
Page 1 of 1 |
| Author: | cast and blast [ Mon Feb 18, 2013 8:48 am ] |
| Post subject: | SETX motor mods? |
Looking at doing some light mods to my 2010 36 PD. Had some questions for you enthusiast out there. Where in SETX can I go to get this work done to it. I have been told about the different stages, and I'm not sure which what all each entails? I didn't wanna break the bank, so was wanting to go stage 1 because that's an exhaust and carb right? I just wanna get my hp up and get my rpms back where they should be. Just was looking for some feedback from guys that have had the work done and where I could bring mine here locally. Thanks guys |
|
| Author: | Gameover [ Mon Feb 18, 2013 9:01 am ] |
| Post subject: | Re: SETX motor mods? |
You can go to SETX Performance (they have a website setxperformance.com) and depending on who does your work depends what a stage 1 entails. it will either be: heads exhaust carb or cam heads exhaust |
|
| Author: | SCmudder7071 [ Mon Feb 18, 2013 10:33 am ] |
| Post subject: | Re: SETX motor mods? |
If you are just wanting to do exhaust and carb, order them and put it on yourself. |
|
| Author: | banded-mallard [ Mon Feb 18, 2013 10:45 am ] |
| Post subject: | Re: SETX motor mods? |
| Author: | craig [ Mon Feb 18, 2013 11:48 am ] |
| Post subject: | Re: SETX motor mods? |
Stage 1 is heads, cam and exhaust and is the most popular and most reliable engine mod. |
|
| Author: | The Legend [ Mon Feb 18, 2013 11:59 am ] |
| Post subject: | Re: SETX motor mods? |
Cody at SETX PERFORMANCE. You'll thank me or should I say us later Sent from my DROID RAZR using Tapatalk 2 |
|
| Author: | redfish [ Mon Feb 18, 2013 12:04 pm ] |
| Post subject: | Re: SETX motor mods? |
Im with The Legend SETX performance is the only way to go!! Justin and Cody will take care of you!! |
|
| Author: | The Legend [ Mon Feb 18, 2013 12:07 pm ] |
| Post subject: | Re: SETX motor mods? |
And when I said "us" I meant the folks that's had mods done there. Sent from my DROID RAZR using Tapatalk 2 |
|
| Author: | AKA Freshwaterkilla [ Mon Feb 18, 2013 2:28 pm ] |
| Post subject: | Re: SETX motor mods? |
| Author: | craig [ Mon Feb 18, 2013 3:11 pm ] |
| Post subject: | Re: SETX motor mods? |
| Author: | The Legend [ Mon Feb 18, 2013 3:17 pm ] |
| Post subject: | Re: SETX motor mods? |
Easy easy...I mentioned Cody cause yes he's in SETX and yes he did my engine. He's done a zillion others here in town too not to mention far and abroad. I'm sure Hoyt and Calen are just as capable and do outstanding work. Cody just fit the location criteria the man asked for. Sent from my DROID RAZR using Tapatalk 2 |
|
| Author: | SammyC [ Mon Feb 18, 2013 3:30 pm ] |
| Post subject: | Re: SETX motor mods? |
I've had great dealings w SETX as well. |
|
| Author: | AKA Freshwaterkilla [ Mon Feb 18, 2013 3:34 pm ] |
| Post subject: | Re: SETX motor mods? |
| Author: | craig [ Mon Feb 18, 2013 3:44 pm ] |
| Post subject: | Re: SETX motor mods? |
| Author: | The Legend [ Mon Feb 18, 2013 3:52 pm ] |
| Post subject: | Re: SETX motor mods? |
Lol 10-4 Sent from my DROID RAZR using Tapatalk 2 |
|
| Author: | marsh mule [ Mon Feb 18, 2013 5:19 pm ] |
| Post subject: | Re: SETX motor mods? |
I'm going to Cody when I get the heads done on my lil 23. |
|
| Author: | JIMMY W [ Mon Feb 18, 2013 5:58 pm ] |
| Post subject: | Re: SETX motor mods? |
| Author: | dfou [ Mon Feb 18, 2013 6:10 pm ] |
| Post subject: | Re: SETX motor mods? |
http://www.setxperformanceshop.com |
|
| Author: | Quack Stackin [ Mon Feb 18, 2013 6:21 pm ] |
| Post subject: | Re: SETX motor mods? |
quick question about setx, im in Alabama and not wanting iron mountain and would like to send my heads to a reputable source, can I ship them to setx to be worked? |
|
| Author: | OwenDickeson [ Mon Feb 18, 2013 6:22 pm ] |
| Post subject: | Re: SETX motor mods? |
yes |
|
| Author: | JIMMY W [ Mon Feb 18, 2013 6:36 pm ] |
| Post subject: | Re: SETX motor mods? |
| Author: | The Legend [ Mon Feb 18, 2013 6:37 pm ] |
| Post subject: | Re: SETX motor mods? |
Yes. Cody gets entire motors shipped to him all the time. When I was getting mine done there was at least (2) there in crates. I believe he said one was from Maryland Sent from my DROID RAZR using Tapatalk 2 |
|
| Author: | bayouboy [ Mon Feb 18, 2013 6:49 pm ] |
| Post subject: | Re: SETX motor mods? |
| Author: | Gameover [ Wed Feb 20, 2013 7:12 am ] |
| Post subject: | Re: SETX motor mods? |
| Author: | alexm [ Tue Feb 26, 2013 12:25 am ] |
| Post subject: | Re: SETX motor mods? |
What are the benefits of sending your heads to setx or Hoyt. Rather than ordering a set of iron mountain from bps? With do u think makes more hp? Cheaper/economical ? Last longer? How do you contact Hoyt? |
|
| Author: | CootSlayerRMFT [ Tue Feb 26, 2013 1:17 am ] |
| Post subject: | Re: SETX motor mods? |
| Author: | alexm [ Tue Feb 26, 2013 3:52 am ] |
| Post subject: | Re: SETX motor mods? |
Very nice. Lol can you give me an example or an instance to explain why they are dog kaka! |
|
| Author: | tchauvin [ Tue Feb 26, 2013 5:36 am ] |
| Post subject: | Re: SETX motor mods? |
| Author: | bayouboy [ Tue Feb 26, 2013 10:14 am ] |
| Post subject: | Re: SETX motor mods? |
X2 Lets just say for example. 2 guys with IM heads Guy A and Guy B. Guy A went ride with Guy B, Guy B walked the dog on Guy A, Guy B Then talked all kinds of smack, Guy A went to Cody told him what happened so Cody took a set of his heads and put on Guy A's motor. Guy A and Guy B hit the water again and Guy A walked the dog on Guy B which needless to say pissed Guy B off greatly. I heard that Guy B won't come out his room. not sure if that last part is true or not. but the rest is! lol |
|
| Author: | AKA Freshwaterkilla [ Tue Feb 26, 2013 12:35 pm ] |
| Post subject: | Re: SETX motor mods? |
| Author: | Will [ Tue Feb 26, 2013 1:49 pm ] |
| Post subject: | Re: SETX motor mods? |
| Author: | bayouboy [ Tue Feb 26, 2013 3:40 pm ] |
| Post subject: | Re: SETX motor mods? |
Mercy, Every time I see that pic I think that dudes has got some serious Mad Motor Skills! I'd hang that bitch on my wall! Nice work Cody! |
|
| Author: | alexm [ Wed Feb 27, 2013 12:48 am ] |
| Post subject: | Re: SETX motor mods? |
Holy shit! Exhibit A is Cody's work? Exhibit B is IM? What a difference!!!! |
|
| Author: | SCmudder7071 [ Wed Feb 27, 2013 1:22 am ] |
| Post subject: | Re: SETX motor mods? |
There is a ton of difference between the two. Everything I've seen on here from Cody is beyond exceptional work. Do remember that SETX is custom and IM is an off the shelf head. I'm running IM heads and they are way better than stock. That being said, I have my stock heads I will be sending to SETX. I will say on my IMs, I had Al at PVT do some more work on them. |
|
| Author: | alexm [ Thu Feb 28, 2013 1:08 am ] |
| Post subject: | Re: SETX motor mods? |
In my head when I think custom I think chaching! Money. Looking at this work makes me think it's worth it. But I guess I just gotta call him and get the actual quote though. |
|
| Author: | CootSlayerRMFT [ Thu Feb 28, 2013 1:25 am ] |
| Post subject: | Re: SETX motor mods? |
From what I understand, there's very little price difference. The real benefit is that you can tell him what you have, what you carry, and what you'd like it to be able to do. With that info and some specifics, he can shave your heads and cut you a custom cam that will work together to help you achieve your specific goals of performance and reliability. I know that's vague, but how else do you describe custom work without knowing the specifics. It's all about you and your motor! |
|
| Author: | take'emgator [ Thu Feb 28, 2013 4:07 am ] |
| Post subject: | Re: SETX motor mods? |
Got a GTR for sale with EXHIBIT A on it, never ran better. Only thing stock on my motor is the crank and flywheel. From the pictures above you can see clearly why people choose Cody's work over a mass produced set of heads. we are not talking apples to apples here, Can't go wrong with picture proof |
|
| Author: | renovator [ Thu Feb 28, 2013 6:51 pm ] |
| Post subject: | Re: SETX motor mods? |
I'll add that he works the intake as well. My heads shipped to Cody this morning. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|