It is currently Sun Jul 20, 2025 5:44 pm




Reply to topic  [ 15 posts ] 
 1852 Uncle J with stock 35 GTR-update with mods 
Author Message
MMT Addict

Joined: Sat May 02, 2009 1:11 am
Posts: 549
Post 1852 Uncle J with stock 35 GTR-update with mods
[url][/url]Quick review- more will come later. I've only run it for about 20 mins so far. Need to adjust the throttle some- only about 4100 RPM OTW at the moment. All speeds are deep water in the river

Boat - 1852 uncle J custom w/huntdeck
3/16" bottom 1/8" sides
24" sides
Tapered chine
4" catwalks
Fully welded floor
6.5 ft front deck
Removable poling platform
Removable pirogue rack
Removable bow fishing rail
3 movable seat bases
Spud pole kit
Motor - 35 GTR ( stock for now)
Load tested - 2 guys (195 and 175), 12 gallons of gas, and all the extra accessories still attached
Speeds - 26.5 going down river at ~3600 RPM deep water. 25.5 going back up river.
The boat turns really really well too- no slide in reasonable turns at all
Need to adjust the throttle I know. It's also idling very high at the moment but will get that taken care of this week too. Will post more speeds in different conditions and loads after I do that.
Still have a few odds and ends to add on as well. Thanks for looking.

ImageUploadedByTapatalk1377558964.861121.jpgImageUploadedByTapatalk1377558978.305312.jpgImageUploadedByTapatalk1377558991.005693.jpg


You do not have the required permissions to view the files attached to this post.


Mon Aug 26, 2013 5:17 pm
Profile
MMT Addict

Joined: Sat May 02, 2009 1:11 am
Posts: 549
Post Re: 1852 Uncle J with stock 35 GTR
ImageUploadedByTapatalk1377559048.320818.jpgImageUploadedByTapatalk1377559067.872063.jpgImageUploadedByTapatalk1377559076.855225.jpg


You do not have the required permissions to view the files attached to this post.


Mon Aug 26, 2013 5:18 pm
Profile
MMT Pro Member

Joined: Sat Jun 13, 2009 10:38 am
Posts: 138
Post Re: 1852 Uncle J with stock 35 GTR
Turned out really nice! Like the layout and paint job.

Now how about letting me get two of those seat bases! :)
Forgot all about getting a couple of those when I had mine made.


Mon Aug 26, 2013 5:27 pm
Profile
MMT Elite Member
User avatar

Joined: Wed Sep 21, 2011 2:53 pm
Posts: 5077
Location: The duck Mecca called Ga!
Post Re: 1852 Uncle J with stock 35 GTR
Very nice rig Mr. Dr. White. Can't wait til we get to put some green on the front of the bow.

_________________
HOTSAUCE170 wrote:
I've never gone to Seminole for the amenities/luxury the two reasons I go down there are to kill shit and get fucked up with like minded individuals aka OG'S. If you want to swirl wine and stay in a room where politics and investment diversity are discussed (with no roaches) lake lanier is near Atlanta. If you wanna have an awesome time and maybe stay in a room where children were conceived on one side and someone got stabbed over an 8-ball on the other come on down I got a can of raid. :D


Mon Aug 26, 2013 5:59 pm
Profile
MMT Addict

Joined: Sat May 02, 2009 1:11 am
Posts: 549
Post Re: 1852 Uncle J with stock 35 GTR
Won't be long now JB!
Choc, am I gonna have to lock those seat up? Lol


Mon Aug 26, 2013 6:01 pm
Profile
MMT Elite Member
User avatar

Joined: Wed Sep 21, 2011 2:53 pm
Posts: 5077
Location: The duck Mecca called Ga!
Post Re: 1852 Uncle J with stock 35 GTR
We gotta get you with Dakota so you will have a decent place to stay out on the prairie.

_________________
HOTSAUCE170 wrote:
I've never gone to Seminole for the amenities/luxury the two reasons I go down there are to kill shit and get fucked up with like minded individuals aka OG'S. If you want to swirl wine and stay in a room where politics and investment diversity are discussed (with no roaches) lake lanier is near Atlanta. If you wanna have an awesome time and maybe stay in a room where children were conceived on one side and someone got stabbed over an 8-ball on the other come on down I got a can of raid. :D


Mon Aug 26, 2013 6:03 pm
Profile
MMT Pro Member

Joined: Sat Jun 13, 2009 10:38 am
Posts: 138
Post Re: 1852 Uncle J with stock 35 GTR
Nah, they're safe. What time y'all normally get to bed? 8-)


Mon Aug 26, 2013 6:12 pm
Profile
MMT 1000 Club

Joined: Mon Dec 10, 2012 7:08 pm
Posts: 1474
Location: Morgan City, La
Post Re: 1852 Uncle J with stock 35 GTR
What kind of gas tank is that. I need a new one?

_________________
1854 Extreme CC 35 GTR

RTR!!!


Mon Aug 26, 2013 7:22 pm
Profile
MMT Pro Member

Joined: Sat Nov 03, 2012 1:37 pm
Posts: 126
Location: Longview, TX
Post Re: 1852 Uncle J with stock 35 GTR
I really like the drop in bow fishing rails

_________________
16x54 GDSD
Simple.....
(was simple, now a rocket)


Thu Aug 29, 2013 12:53 pm
Profile
MMT Pro Member
User avatar

Joined: Sat Dec 03, 2011 12:46 pm
Posts: 186
Location: Tallahassee, FL/Oxford, MS
Post Re: 1852 Uncle J with stock 35 GTR
Is that a small LED light on the back of your air filter cover?


Thu Aug 29, 2013 1:17 pm
Profile
MMT Addict

Joined: Sat May 02, 2009 1:11 am
Posts: 549
Post Re: 1852 Uncle J with stock 35 GTR
Barras. I'm not sure where the gas tank came from. Ill look and see if it has a name on it. If not maybe Jason will chime in.
Yes that's a small LED light on the back


Thu Aug 29, 2013 8:50 pm
Profile
MMT Addict

Joined: Sat May 02, 2009 1:11 am
Posts: 549
Post Re: 1852 Uncle J with stock 35 GTR
Next week should be fun
Just ordered hydroturf, seats, 70lb riptide, batteries. gator glide will go on after teal season.
Gator season here opens next weekend and ill be out for that. Will take the platform, rack, and light rails off and update my review without all that on there and after adjusting the throttle next week


Thu Aug 29, 2013 8:54 pm
Profile
MMT Pro Member

Joined: Sun Feb 08, 2009 3:26 pm
Posts: 308
Post Re: 1852 Uncle J with stock 35 GTR
I want some of those seats


Wed Sep 04, 2013 1:21 pm
Profile
MMT Addict

Joined: Sat May 02, 2009 1:11 am
Posts: 549
Post Re: 1852 Uncle J with stock 35 GTR-update with mods
Time for an update
I added hydroturf
Gutted stock exhaust
Mikuni car
Hoyt cam
Headwork by team camo

Me and the dog and 10 gallons of gas it will run 31.5 solid and bump above 32 now and then at around 4400 RPMs but porpoising
3 guys avg weight 190lbs running 31 when I moved weight around at 4380
4 guys around 190lbs running 29.5 around 4280
7 people (3 smaller girls and 4 guys) it jumped right up on plane but was only running about 16.5 at 3750- didn't move weight around and since I had the seats out most of the weight was on the edge of the front deck.
This boat is a beast and stock it completely died with very much load. Now I'm comfortable carrying as much as I can put in it. Still haven't tried it in the bottom pin hole, and have a 165 main jet coming in. Don't know if that will give me anymore or not but I'm very happy with it now. Rob has been very helpful with all my stupid questions and I had my heads back 2 weeks after I sent them to him. And oh yea, gator glide is going on this week so I expect 5 more mph after that!


Mon Nov 11, 2013 7:02 pm
Profile
MMT Addict

Joined: Mon Jun 18, 2012 7:33 pm
Posts: 681
Location: DeKalb, Texas between the rivers
Post Re: 1852 Uncle J with stock 35 GTR-update with mods
Good speeds under load. Making me ready to get my mods in my new motor.

_________________
Uncle J's Custom Bow Fishing Rig 20/72 30" Sides, Calens Modded Dual GTR's
Boat Name: The Gar Barge
Team Name: Southern Stickers

18/58 Uncle J Custom 3/16 bottom 24" sides w/catwalks 6' front deck with another GTR Pushing it.

17/54 Gator Trax 35 Mud Buddy W/All aluminum FPR Mod SOLD


Mon Nov 11, 2013 9:00 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 15 posts ] 

Who is online

Users browsing this forum: Google [Bot] and 53 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: