Turned out really nice! Like the layout and paint job.
Now how about letting me get two of those seat bases!
Forgot all about getting a couple of those when I had mine made.
| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| 1852 Uncle J with stock 35 GTR-update with mods http://mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=44693 |
Page 1 of 1 |
| Author: | d_white [ Mon Aug 26, 2013 5:17 pm ] |
| Post subject: | 1852 Uncle J with stock 35 GTR-update with mods |
[url][/url]Quick review- more will come later. I've only run it for about 20 mins so far. Need to adjust the throttle some- only about 4100 RPM OTW at the moment. All speeds are deep water in the river Boat - 1852 uncle J custom w/huntdeck 3/16" bottom 1/8" sides 24" sides Tapered chine 4" catwalks Fully welded floor 6.5 ft front deck Removable poling platform Removable pirogue rack Removable bow fishing rail 3 movable seat bases Spud pole kit Motor - 35 GTR ( stock for now) Load tested - 2 guys (195 and 175), 12 gallons of gas, and all the extra accessories still attached Speeds - 26.5 going down river at ~3600 RPM deep water. 25.5 going back up river. The boat turns really really well too- no slide in reasonable turns at all Need to adjust the throttle I know. It's also idling very high at the moment but will get that taken care of this week too. Will post more speeds in different conditions and loads after I do that. Still have a few odds and ends to add on as well. Thanks for looking. ImageUploadedByTapatalk1377558964.861121.jpgImageUploadedByTapatalk1377558978.305312.jpgImageUploadedByTapatalk1377558991.005693.jpg |
|
| Author: | d_white [ Mon Aug 26, 2013 5:18 pm ] |
| Post subject: | Re: 1852 Uncle J with stock 35 GTR |
ImageUploadedByTapatalk1377559048.320818.jpgImageUploadedByTapatalk1377559067.872063.jpgImageUploadedByTapatalk1377559076.855225.jpg |
|
| Author: | Choclab [ Mon Aug 26, 2013 5:27 pm ] |
| Post subject: | Re: 1852 Uncle J with stock 35 GTR |
Turned out really nice! Like the layout and paint job. Now how about letting me get two of those seat bases! Forgot all about getting a couple of those when I had mine made. |
|
| Author: | mizzippi jb [ Mon Aug 26, 2013 5:59 pm ] |
| Post subject: | Re: 1852 Uncle J with stock 35 GTR |
Very nice rig Mr. Dr. White. Can't wait til we get to put some green on the front of the bow. |
|
| Author: | d_white [ Mon Aug 26, 2013 6:01 pm ] |
| Post subject: | Re: 1852 Uncle J with stock 35 GTR |
Won't be long now JB! Choc, am I gonna have to lock those seat up? Lol |
|
| Author: | mizzippi jb [ Mon Aug 26, 2013 6:03 pm ] |
| Post subject: | Re: 1852 Uncle J with stock 35 GTR |
We gotta get you with Dakota so you will have a decent place to stay out on the prairie. |
|
| Author: | Choclab [ Mon Aug 26, 2013 6:12 pm ] |
| Post subject: | Re: 1852 Uncle J with stock 35 GTR |
Nah, they're safe. What time y'all normally get to bed? 
|
|
| Author: | bbarras85 [ Mon Aug 26, 2013 7:22 pm ] |
| Post subject: | Re: 1852 Uncle J with stock 35 GTR |
What kind of gas tank is that. I need a new one? |
|
| Author: | mattpittinger [ Thu Aug 29, 2013 12:53 pm ] |
| Post subject: | Re: 1852 Uncle J with stock 35 GTR |
I really like the drop in bow fishing rails |
|
| Author: | quackhunter99 [ Thu Aug 29, 2013 1:17 pm ] |
| Post subject: | Re: 1852 Uncle J with stock 35 GTR |
Is that a small LED light on the back of your air filter cover? |
|
| Author: | d_white [ Thu Aug 29, 2013 8:50 pm ] |
| Post subject: | Re: 1852 Uncle J with stock 35 GTR |
Barras. I'm not sure where the gas tank came from. Ill look and see if it has a name on it. If not maybe Jason will chime in. Yes that's a small LED light on the back |
|
| Author: | d_white [ Thu Aug 29, 2013 8:54 pm ] |
| Post subject: | Re: 1852 Uncle J with stock 35 GTR |
Next week should be fun Just ordered hydroturf, seats, 70lb riptide, batteries. gator glide will go on after teal season. Gator season here opens next weekend and ill be out for that. Will take the platform, rack, and light rails off and update my review without all that on there and after adjusting the throttle next week |
|
| Author: | duckmananderson [ Wed Sep 04, 2013 1:21 pm ] |
| Post subject: | Re: 1852 Uncle J with stock 35 GTR |
I want some of those seats |
|
| Author: | d_white [ Mon Nov 11, 2013 7:02 pm ] |
| Post subject: | Re: 1852 Uncle J with stock 35 GTR-update with mods |
Time for an update I added hydroturf Gutted stock exhaust Mikuni car Hoyt cam Headwork by team camo Me and the dog and 10 gallons of gas it will run 31.5 solid and bump above 32 now and then at around 4400 RPMs but porpoising 3 guys avg weight 190lbs running 31 when I moved weight around at 4380 4 guys around 190lbs running 29.5 around 4280 7 people (3 smaller girls and 4 guys) it jumped right up on plane but was only running about 16.5 at 3750- didn't move weight around and since I had the seats out most of the weight was on the edge of the front deck. This boat is a beast and stock it completely died with very much load. Now I'm comfortable carrying as much as I can put in it. Still haven't tried it in the bottom pin hole, and have a 165 main jet coming in. Don't know if that will give me anymore or not but I'm very happy with it now. Rob has been very helpful with all my stupid questions and I had my heads back 2 weeks after I sent them to him. And oh yea, gator glide is going on this week so I expect 5 more mph after that! |
|
| Author: | missile [ Mon Nov 11, 2013 9:00 pm ] |
| Post subject: | Re: 1852 Uncle J with stock 35 GTR-update with mods |
Good speeds under load. Making me ready to get my mods in my new motor. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|