you bet ya!
dropping this one off and picking up the new one.
| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Willet's old 1848 Phowler http://mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=5162 |
Page 1 of 1 |
| Author: | Ruddyduck [ Wed Oct 07, 2009 5:01 pm ] |
| Post subject: | Willet's old 1848 Phowler |
MM Brand:36 PD stage 1 Horsepower: 40-50 Boat Brand:Phowler Boat Size:1848 Speeds | Shallow Water: 33.4mph 4500rpm Speeds | Deep Water:33mph 4500rpm Thought I would post a review on the old v bow boat Willet had so many problems with. PW let me borrow it while my new rig was being built. I removed the hydro turf (thats a biatch) and cut out all the old c channel. Then pressed the floor back flat with a steel tube and bottle jack and welded 2x2 3/16" tube on top the ribs to hold it. With no floor, no seats, no boxes, two gallons of gas, a small lawn mower battery, and my arse in the boat I got 33mph. Water depth didn't really make any noticeable difference on the speed. After i put the floor and two boxes back in it would still get a little over 30. I used the hell out of it commercial fishing scouting for asian carp and setting gill nets. I was really impressed I could put 1500 yards of net and two guys on step. It wasn't very fast, but it did it. After 80 hours of abuse, the floor is still flat and boat still performs good. Overall I like the way the boat planes and handles, I just don't really care for the way it looks!!! Heres a few pics of the fix. |
|
| Author: | marsh bandit [ Wed Oct 07, 2009 7:50 pm ] |
| Post subject: | Re: Willet's old 1848 Phowler |
Glad to hear it. Sounds like you had a little better luck with it. Is that RUDDYDUCKS new boat in the background they are takin pictures of lol? |
|
| Author: | Ruddyduck [ Wed Oct 07, 2009 8:17 pm ] |
| Post subject: | Re: Willet's old 1848 Phowler |
you bet ya! dropping this one off and picking up the new one.
|
|
| Author: | Crews [ Wed Oct 07, 2009 9:59 pm ] |
| Post subject: | Re: Willet's old 1848 Phowler |
| all that shit talking about the correct way to brace a boat, and look how it ended up. Ruddyduck, I'm glad you had a good experience with it... that boat did dang good in the end! |
|
| Author: | willett [ Thu Oct 08, 2009 2:16 pm ] |
| Post subject: | Re: Willet's old 1848 Phowler |
congrats glad it ended up workin out |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|