SSWWWEEEEEETTTTTT!
What`s the info on who makes that rig? Web site? Phone#? Local?
| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| 18'6"x48" Sportsmen Fab 36PD http://mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=7705 |
Page 1 of 2 |
| Author: | tacmc6 [ Tue Feb 09, 2010 11:46 am ] |
| Post subject: | 18'6"x48" Sportsmen Fab 36PD |
Put my new boat in the water yesterday for the first time. Casey is trying a new design and got the first one. The boat performed really well in rough, choppy and calm conditions. We could not find any mud or even shallow water in the basin. MM Brand:ProDrive Horsepower:36 Boat Brand:Sportsman Fabrication Boat Size:18'6" x 48" with 3/16" bottom and ribs and 1/8 " sides Boat Layout:Open Speeds | Shallow Water:n/a Speeds | Deep Water:Averaged 28.4 Total Boat Load With Gear Etc: About 650 lbs when the GPS was used Conditions Tested In:Rough, choppy and calm waters |
|
| Author: | DMC [ Tue Feb 09, 2010 12:19 pm ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
Thats a nice looking rig! Is that a semi-v hull? |
|
| Author: | richardb [ Tue Feb 09, 2010 12:56 pm ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
Nice looken Rig. Would like to know how it does in the mud keep us posted. |
|
| Author: | tacmc6 [ Tue Feb 09, 2010 1:05 pm ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
DMC Yes, it is a semi v, about 4-5 feet back and then flattens out. It worked great yesterday in the rough/choppy water. I was impressed with it. Trying to find some mud to play in to really test it out. |
|
| Author: | Woodpeckerlips [ Tue Feb 09, 2010 4:19 pm ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
Dammit Boy! Das Perdy! |
|
| Author: | DMC [ Tue Feb 09, 2010 6:48 pm ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
Is it 48" wide with the step in the bottom? |
|
| Author: | Quackpipe [ Tue Feb 09, 2010 7:11 pm ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
SSWWWEEEEEETTTTTT! What`s the info on who makes that rig? Web site? Phone#? Local? |
|
| Author: | tacmc6 [ Tue Feb 09, 2010 8:04 pm ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
Quackpipe Sportsman Fabrication is located in Morgan City, La and the owner/builder/designer is named Casey and you can reach him at (985)518-9804. DMC Are you the refering to the "step down" being the two cuts towards the stern on both sides? |
|
| Author: | br boyz [ Tue Feb 09, 2010 8:14 pm ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
What's the chance of setting up a demo with him to ride in that particular design boat? I'm really interseted in that hull, looks like it handles well. Thanks |
|
| Author: | fishaholic82 [ Tue Feb 09, 2010 9:51 pm ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
do you have any mods done to your engine and do you know if he'll build one with a hunt deck transom? |
|
| Author: | Quackpipe [ Tue Feb 09, 2010 10:00 pm ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
10-4 tac, thanks! That is one fine rig. Got the PM Bundy,thanks. |
|
| Author: | DMC [ Wed Feb 10, 2010 4:39 am ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
| Author: | tacmc6 [ Wed Feb 10, 2010 8:12 am ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
br boyz Mine is the only one of this model but I would be willing to take you and let you see how it performs. fishaholic82 No mods, just a BPS CrossOver Exhaust and yes he can build the hunt deck or any add on's you may want. Hopefully I will have mods soon. Waiting on the carb to come in now. DMC I'm almost positive it's 42" between the cuts. I will check with Casey today to make sure what the measurement is. |
|
| Author: | fishaholic82 [ Wed Feb 10, 2010 9:21 am ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
How tall are the sides on that hull |
|
| Author: | coondik [ Wed Feb 10, 2010 9:21 am ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
i think you and Tyler are going to enjoy dis boat. Can't wait to see what she's gonna do in de mud! |
|
| Author: | tacmc6 [ Wed Feb 10, 2010 11:20 am ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
fishaholic82 I was wrong about the width it is 44" between the cut's. The sides are 21". |
|
| Author: | Crews [ Wed Feb 10, 2010 12:17 pm ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
does it turn good? |
|
| Author: | tacmc6 [ Wed Feb 10, 2010 4:15 pm ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
CREWS Yes it does turn good! HUGE A$$ difference from my flat bottom to this! |
|
| Author: | deltaduckmaster [ Wed Feb 10, 2010 7:12 pm ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
Looks like a copy cat!! In the MC area!!!
|
|
| Author: | deltaduckmaster [ Wed Feb 10, 2010 7:13 pm ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
Looks like a copy cat!! In the MC area!!!
|
|
| Author: | POKER1 [ Wed Feb 10, 2010 7:16 pm ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
AWWWWW HELLLLLLL !!!!!!!!! 
|
|
| Author: | POKER1 [ Wed Feb 10, 2010 7:16 pm ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
AWWWWW HELLLLLLL !!!!!!!!!
|
|
| Author: | tacmc6 [ Wed Feb 10, 2010 7:21 pm ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
Well, they are both aluminum. I think they both pretty looking, but copy cat, naah, no way! The designs of your boats are Top Secret  I know this is true cuz Giga told me so.
|
|
| Author: | deltaduckmaster [ Wed Feb 10, 2010 7:46 pm ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
| Author: | SmokeEater829 [ Wed Feb 10, 2010 7:52 pm ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
Great looking rig man. I gotta ask, whats that hull cost if you care to disclose that info. I like that design. |
|
| Author: | bundy [ Wed Feb 10, 2010 7:53 pm ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
| Author: | deltaduckmaster [ Wed Feb 10, 2010 7:58 pm ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
| Author: | bundy [ Wed Feb 10, 2010 8:01 pm ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
i was in ur presence.... put another prop on it u might go faster... kabooooooooooommmmmmmmmmm... |
|
| Author: | deltaduckmaster [ Wed Feb 10, 2010 8:03 pm ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
| Author: | bundy [ Wed Feb 10, 2010 8:04 pm ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
ha ha ha i would of but u was to busy getting towed in by my pad nah!!!!! |
|
| Author: | deltaduckmaster [ Wed Feb 10, 2010 8:06 pm ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
| Author: | muddoctor [ Thu Feb 11, 2010 9:31 am ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
Maybe you girls should stick to the topic and stop masterbating all over this thread   Anyway, nice looking hull, has nice lines and looks like it runs pretty good. Nice work. PW |
|
| Author: | b_coonass [ Thu Feb 11, 2010 7:43 pm ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
| Author: | kwak smacker19 [ Thu Feb 11, 2010 11:02 pm ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
man that is a nice boat i gotta wipe the drool of of my key board |
|
| Author: | LA OUTLAW [ Fri Feb 12, 2010 6:30 am ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
| Author: | craig [ Fri Feb 12, 2010 7:08 am ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
Nice. Your not gonna sand blast this one by any chance are you? 
|
|
| Author: | LA OUTLAW [ Fri Feb 12, 2010 7:42 am ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
Craig really if he gets it done by someone that knows what they are doing this time and not a crack head the paint job will come out nice. The last time T didn't know it until it was already done that the guy was a rock star!! lol |
|
| Author: | craig [ Fri Feb 12, 2010 7:44 am ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
Figures. |
|
| Author: | LA OUTLAW [ Fri Feb 12, 2010 7:45 am ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
and they have to use glass blast not lake poluted sand that looks like limestone!!!! Walnut shell is even better. |
|
| Author: | tacmc6 [ Fri Feb 12, 2010 11:06 am ] |
| Post subject: | Re: Rolled out in my new Sportsman Fabrication Hull |
muddoctor Thanks Craig Hell to the NO!!! LA OUTLAW I wish I could go ride but I'm adding my exteded deck and then getting it painted. After that you got a bunch of installs to do Hopefully after that I will have my carb in and then let coondik work the magicthat he does so well. |
|
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|