china metal is a lot lighter,
| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| 36pd on 16/48 fully customized weld-craft http://mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=929 |
Page 1 of 1 |
| Author: | bigfishlon [ Tue Mar 03, 2009 8:01 pm ] |
| Post subject: | 36pd on 16/48 fully customized weld-craft |
Just me in the boat going fishing, 14 gals, 25lbs ice, rods, and tackle i've seen 31.5 on the gps, and loaded down with 3 people and gear bout 900lbs in the boat i never run less than 27! |
|
| Author: | Brinkleydog [ Tue Mar 03, 2009 9:34 pm ] |
| Post subject: | Re: 36pd on 16/48 fully customized weld-craft |
That's a quick rig...what is the hull thickness? Sounds like it carries what u need at a vey good speeds....... Lets see the pics I got a boat fetish....... |
|
| Author: | bigfishlon [ Tue Mar 03, 2009 9:40 pm ] |
| Post subject: | Re: 36pd on 16/48 fully customized weld-craft |
The stock hull weighs only 280lbs and is .125 alum. I been trying to kill it but can only manage to dent the bottom slightly. it has 8 crimps on the bottom so it does not slide at all! I will be posting some pics when i get in from offshore. Also getting lined up to put a EVT stage III on it and then we will see how it runs.. |
|
| Author: | Phathead [ Thu Mar 05, 2009 8:17 pm ] |
| Post subject: | Re: 36pd on 16/48 fully customized weld-craft |
Are you talking about a stock 36? If so, I would have to see it to believe it. 31.5 unloaded is pretty salty on this style hull with a stock 36, and 27 with a 3 man load is phenomenal. Furthermore, I've never seen a .125'' 1648 that weighed that little. But hey, if you say so! |
|
| Author: | basinhunter [ Thu Mar 05, 2009 8:53 pm ] |
| Post subject: | Re: 36pd on 16/48 fully customized weld-craft |
You must have that MB gps |
|
| Author: | deltaduckmaster [ Thu Mar 05, 2009 9:36 pm ] |
| Post subject: | Re: 36pd on 16/48 fully customized weld-craft |
| Author: | stumpgrinder [ Fri Mar 06, 2009 8:21 am ] |
| Post subject: | Re: 36pd on 16/48 fully customized weld-craft |
I have yet to see a Weld-Craft hull made of .125 |
|
| Author: | aucoin [ Fri Mar 06, 2009 9:41 am ] |
| Post subject: | Re: 36pd on 16/48 fully customized weld-craft |
welded a transom on one yesterday.....them things are paper thin......i've welded plenty .100 and it seemed thinner than that prolly .090 you put a stage 3 on that boat, you will tear that transom to peices!!!!! |
|
| Author: | stumpgrinder [ Fri Mar 06, 2009 9:51 am ] |
| Post subject: | Re: 36pd on 16/48 fully customized weld-craft |
used to run one of der tunnels. I know dey offer .090 & .100, don't know of a .125 |
|
| Author: | MaXXis85 [ Fri Mar 06, 2009 10:56 am ] |
| Post subject: | Re: 36pd on 16/48 fully customized weld-craft |
My Brother Breaux hull is all .125 and it weighs close to 500# or more. I call BS on a .125 hull weighing uder 300#. I know when i pull my boat compared to my Grandpaws 1544 Lowe i can tell mine is there where as his little bateau is just bouncin behind me. |
|
| Author: | Ryan190 [ Mon Mar 23, 2009 10:33 pm ] |
| Post subject: | Re: 36pd on 16/48 fully customized weld-craft |
china metal is a lot lighter,
|
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|