haha hell yea... how about a chain driven?
| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| 5.5 home made surface drive http://mudmotortalk.com/mmt_v2/viewtopic.php?f=6&t=10327 |
Page 1 of 1 |
| Author: | duckslayer101 [ Thu Jun 17, 2010 8:48 pm ] |
| Post subject: | 5.5 home made surface drive |
i just bought this motor and put it on my 10' jon i was thinkin it would FLY but no it went prolly 5-6 mph the belt sliped a little bit but if you pull and push in on the prop it will go in and out.....need some help or advice |
|
| Author: | instagator911 [ Thu Jun 17, 2010 10:17 pm ] |
| Post subject: | Re: 5.5 home made surface drive |
need ya a toothed belt and a dual tapered bering setup. |
|
| Author: | bassmaster1228 [ Fri Jun 18, 2010 2:02 pm ] |
| Post subject: | Re: 5.5 home made surface drive |
haha hell yea... how about a chain driven?
|
|
| Author: | willtodo [ Sat Jun 19, 2010 5:37 pm ] |
| Post subject: | Re: 5.5 home made surface drive |
your definetly not going to fly,get you a tach setp and make sure your proped right or geared right |
|
| Author: | Mag10 [ Tue Jun 22, 2010 12:17 pm ] |
| Post subject: | Re: 5.5 home made surface drive |
5.5 will not make a 10' boat fly. I built a 13 hp SD for a 12-14' boat and was able to get about 15 max. What type of drive setup does it have? V-belt, chain, cogged timing belt? I used a cogged timing belt from Gates. Check out their timing belt website there is a lot of info there. Also, try to figure out what gear reduction (if any) you have. Let me know if you have any questions. Mag10 |
|
| Author: | Duck Natzi [ Mon Jun 28, 2010 11:47 pm ] |
| Post subject: | Re: 5.5 home made surface drive |
couple things : 1. What gave you the impression that motor would fly ? 2. Would you really want to fly with that boat ? 3. my best advice would be to save your money and buy a new mini mm from a mm mfg. |
|
| Author: | DeathMetalDukk [ Tue Jun 29, 2010 3:29 pm ] |
| Post subject: | Re: 5.5 home made surface drive |
I'm not sure what the stipulations on "flying" are, but here is a 6.5 hp surface drive pushing a 1236 15-16 mph. http://www.youtube.com/watch?v=dNxd9CVy ... re=related |
|
| Author: | Short On Cache [ Fri Jul 16, 2010 10:08 am ] |
| Post subject: | Re: 5.5 home made surface drive |
man I want one of those! Any ideas who built it? |
|
| Author: | GeeLeDouche [ Sat Jul 17, 2010 12:31 am ] |
| Post subject: | Re: 5.5 home made surface drive |
wow. that sucker's flying for how small the motor is.. I wonder why he didnt just get a bigger motor to start with.. |
|
| Author: | DeathMetalDukk [ Sat Jul 17, 2010 6:51 am ] |
| Post subject: | Re: 5.5 home made surface drive |
| Author: | diceman [ Sat Jul 17, 2010 2:52 pm ] |
| Post subject: | Re: 5.5 home made surface drive |
i bought one last year great set up runs my 1232john with me and the dog at 18mph great for those hard to reach spots 
|
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|