10-4, duck, I was in the south marshes today. Right now I can't justify to she who must be obeyed the $189. For the moment I keep my feet poised balanced and knees slightly bent- as you know the worst thing down here are those floating mud pies.
| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Grab bar http://mudmotortalk.com/mmt_v2/viewtopic.php?f=6&t=24767 |
Page 1 of 1 |
| Author: | Glades Ranger [ Fri Dec 09, 2011 7:48 am ] |
| Post subject: | Grab bar |
I've gotten by without a grab bar for many years but I would lilke to install one. The MB "retractable" one is listed at $180. I don't want a floor model like GD and others have. I have a gunwale channel on my Grizzly (like Wareagle has) that I've used for other accessories that should work as an anchoring point. Any ideas out there? The MB one would be fine but too much $. |
|
| Author: | danimalw [ Fri Dec 09, 2011 11:35 am ] |
| Post subject: | Re: Grab bar |
Not sure if this will work for you. On my boat, there are two short pieces of tubing welded to the side of gun box. The grab bar is u shaped and it just slips in to the 2 sockets when needed. Good luck |
|
| Author: | dead duk [ Fri Dec 09, 2011 1:24 pm ] |
| Post subject: | Re: Grab bar |
You can order a grab bar from bass pro for your grizzly. Lead time is about 4 weeks though. |
|
| Author: | duck [ Fri Dec 09, 2011 10:20 pm ] |
| Post subject: | Re: Grab bar |
I have the MB fold down universal grab bar. I dont have any complaints. It would probably fit your boat a little better than mine since you have the gunwale channel. You can catch them in the classified from time to time. If thats what you decide, Im in south FL if you want to check it out. |
|
| Author: | Glades Ranger [ Sat Dec 10, 2011 4:53 pm ] |
| Post subject: | Re: Grab bar |
10-4, duck, I was in the south marshes today. Right now I can't justify to she who must be obeyed the $189. For the moment I keep my feet poised balanced and knees slightly bent- as you know the worst thing down here are those floating mud pies.
|
|
| Author: | Bayport [ Thu Dec 15, 2011 9:35 am ] |
| Post subject: | Re: Grab bar |
We made one that bolts on the rear side of the seat in front of me. Thru bolted it. It is U shaped and removable. Been real happy w it. |
|
| Author: | keys1222 [ Thu Dec 15, 2011 3:07 pm ] |
| Post subject: | Re: Grab bar |
i made one! search my user name for an idea |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|