| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| 24 Honda LT pushing a 16x44 Shallow water customs http://mudmotortalk.com/mmt_v2/viewtopic.php?f=6&t=37173 |
Page 1 of 1 |
| Author: | Dustin172839 [ Sun Feb 03, 2013 8:45 am ] |
| Post subject: | 24 Honda LT pushing a 16x44 Shallow water customs |
Anyone have experience with a similar combo? Trying to get some speed numbers so I'll have and idea what I'm looking at.. Boats being built. |
|
| Author: | spinnerbait [ Sun Feb 03, 2013 8:19 pm ] |
| Post subject: | Re: 24 Honda LT pushing a 16x44 Shallow water customs |
I have a 23 Vangaurd and a 1644 GoDevil and I'm gettin about 17 mph |
|
| Author: | Dustin172839 [ Mon Feb 04, 2013 8:33 am ] |
| Post subject: | Re: 24 Honda LT pushing a 16x44 Shallow water customs |
Okay not too bad... My 24 is a v twin... Does that make a difference? More power? This is my first go devil. |
|
| Author: | 4Cody4 [ Mon Feb 04, 2013 11:20 am ] |
| Post subject: | Re: 24 Honda LT pushing a 16x44 Shallow water customs |
I have a 24 hp Honda longtail on a 1644 go devil boat and I'll run 18 with just gas and a cooler. Add weight and it slows down. |
|
| Author: | Dustin172839 [ Mon Feb 04, 2013 11:49 am ] |
| Post subject: | Re: 24 Honda LT pushing a 16x44 Shallow water customs |
Okay thanks man |
|
| Author: | 4Cody4 [ Mon Feb 04, 2013 12:36 pm ] |
| Post subject: | Re: 24 Honda LT pushing a 16x44 Shallow water customs |
It's not too bad, I can still get on plane with two of us in the boat and loaded with decoys, it just isn't fast. Only place I don't like the boat is on bigger lakes. It's great on the rivers and marshes. |
|
| Author: | Dustin172839 [ Mon Feb 04, 2013 1:20 pm ] |
| Post subject: | Re: 24 Honda LT pushing a 16x44 Shallow water customs |
Oh okay yeah I hunt a lot of marshes and flooded timber so it should Do great, I have not ran the motor on a boat yet but I have it unders the carport and I crank it once a week just to keep it from sitting up and it runs so good. |
|
| Author: | Mlowery [ Mon Feb 04, 2013 8:31 pm ] |
| Post subject: | Re: 24 Honda LT pushing a 16x44 Shallow water customs |
1542 Alumacraft with a 25hp Kohler pushing 20 to 21 with 2 people. 22 to 23 with just me. |
|
| Author: | Randy S [ Sun Feb 10, 2013 9:08 pm ] |
| Post subject: | Re: 24 Honda LT pushing a 16x44 Shallow water customs |
| Author: | codyw [ Mon Feb 11, 2013 6:20 pm ] |
| Post subject: | Re: 24 Honda LT pushing a 16x44 Shallow water customs |
I have a 23 vanguard on a 16' all weld boat and get. 23 with just me and gas. |
|
| Author: | Dustin172839 [ Wed Feb 20, 2013 7:20 am ] |
| Post subject: | Re: 24 Honda LT pushing a 16x44 Shallow water customs |
| Author: | ottertailriverrunner [ Wed Feb 20, 2013 8:18 am ] |
| Post subject: | Re: 24 Honda LT pushing a 16x44 Shallow water customs |
^^^^ I'm swapping a 16 vanguard out with a new honda gx630 and Mr. Coco at GD told me to cut the plunger off on that shutoff selonoid. The are designed for pressure washers and other applications that shut the motor off at WOT, not for a mud motor that you shut off at idle. It was an easy job. 20 mins. If you do a search on it in the motor mods forum there is a lot of good info on those solenoid. It sounds like there are plenty of probs with them. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|