lol
id pull the plugs on it and let the biatch sink if dat would happen
| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Safe rpms for a 25hp longtail with a Kohler? http://mudmotortalk.com/mmt_v2/viewtopic.php?f=6&t=4742 |
Page 1 of 1 |
| Author: | allnighter [ Sun Sep 20, 2009 9:36 pm ] |
| Post subject: | Safe rpms for a 25hp longtail with a Kohler? |
I was wondering what rpm yall run your motors. Mine tops out at 3300 rpm right now I dont want to push it to hard but I thought it my be able to do better. |
|
| Author: | Xcutter [ Sun Sep 20, 2009 9:58 pm ] |
| Post subject: | Re: Safe rpms for a 25hp longtail with a vangard? |
Mine is a kohler but it hit 3600 in the water today! Running 3980 out of the water |
|
| Author: | allnighter [ Sun Sep 20, 2009 10:40 pm ] |
| Post subject: | Re: Safe rpms for a 25hp longtail with a Kohler? |
Ya I meant to say kohler I was just talking to someone about a vanguard. thanks for the imfo. |
|
| Author: | kibb [ Mon Sep 21, 2009 5:19 am ] |
| Post subject: | Re: Safe rpms for a 25hp longtail with a Kohler? |
I turn 4150 OW on a 27 Kohler. 4200 OW is about the highest I would go. At 4150 this allows me to still get it up to 3500 IW with another person and hunting gear. |
|
| Author: | Country [ Mon Sep 21, 2009 5:57 pm ] |
| Post subject: | Re: Safe rpms for a 25hp longtail with a Kohler? |
I saw 4250 once oow...back down to 4190ish now |
|
| Author: | shallow water master [ Mon Sep 21, 2009 6:04 pm ] |
| Post subject: | Re: Safe rpms for a 25hp longtail with a Kohler? |
i wouldnt run no more then 4000 |
|
| Author: | schrieverboy [ Mon Sep 21, 2009 6:07 pm ] |
| Post subject: | Re: Safe rpms for a 25hp longtail with a Kohler? |
i had a 25 kohler in a mudboat and would steady run at 3700 |
|
| Author: | Tenpoint [ Mon Sep 21, 2009 6:10 pm ] |
| Post subject: | Re: Safe rpms for a 25hp longtail with a Kohler? |
If ya keep it around 3600 to 3800 youll never have a problem. You can get more but those numbers are safe. |
|
| Author: | shallow water master [ Mon Sep 21, 2009 6:14 pm ] |
| Post subject: | Re: Safe rpms for a 25hp longtail with a Kohler? |
| Author: | schrieverboy [ Mon Sep 21, 2009 6:16 pm ] |
| Post subject: | Re: Safe rpms for a 25hp longtail with a Kohler? |
4k otw or in?? |
|
| Author: | shallow water master [ Mon Sep 21, 2009 6:17 pm ] |
| Post subject: | Re: Safe rpms for a 25hp longtail with a Kohler? |
| Author: | Tenpoint [ Mon Sep 21, 2009 6:18 pm ] |
| Post subject: | Re: Safe rpms for a 25hp longtail with a Kohler? |
| Author: | schrieverboy [ Mon Sep 21, 2009 6:20 pm ] |
| Post subject: | Re: Safe rpms for a 25hp longtail with a Kohler? |
i wouldnt have seen it anyway wit da heavy ass mudboat i was runnin at da time |
|
| Author: | shallow water master [ Mon Sep 21, 2009 6:21 pm ] |
| Post subject: | Re: Safe rpms for a 25hp longtail with a Kohler? |
| Author: | shallow water master [ Mon Sep 21, 2009 6:23 pm ] |
| Post subject: | Re: Safe rpms for a 25hp longtail with a Kohler? |
| Author: | schrieverboy [ Mon Sep 21, 2009 6:23 pm ] |
| Post subject: | Re: Safe rpms for a 25hp longtail with a Kohler? |
lol id pull the plugs on it and let the biatch sink if dat would happen
|
|
| Author: | shallow water master [ Mon Sep 21, 2009 6:24 pm ] |
| Post subject: | Re: Safe rpms for a 25hp longtail with a Kohler? |
| Author: | allnighter [ Mon Sep 21, 2009 9:53 pm ] |
| Post subject: | Re: Safe rpms for a 25hp longtail with a Kohler? |
So 3800,3900 rpm is safe? I would rather go slow that blow the motor up. |
|
| Author: | dead duk [ Thu Oct 01, 2009 10:51 am ] |
| Post subject: | Re: Safe rpms for a 25hp longtail with a Kohler? |
Yes. It is safe. I have a 27 kohler MBLT. I get 4050 out of water and 3700 to 3800 with a load. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|