It is currently Thu Sep 09, 2010 6:10 am




Reply to topic  [ 50 posts ]  Go to page 1, 2  Next
 Wallisville 2010 
Author Message
MMT Elite Member
User avatar

Joined: Thu Mar 05, 2009 10:11 am
Posts: 2457
Location: Houston, TX | Pirates Cove
Post Wallisville 2010
Mark your calendars! Were planning this one in a hurry!

April 17th & 18th

Wallisville, Texas.

Click Here for a Map of the Area

The best place to stay is really in Baytown. There are other places, but after talking to some of the operators I was less than impressed with "no reservations" cash only BS...

So, to save everyone a big headache:

Bays Inn in Baytown, TX
2301 Decker Dr.
Baytown, TX 77520

http://www.baysinn.com (online reservation is available, by doing so its $3 cheaper)

When calling or if you call the number is 281-422-3641 our group name is "MudMotorTalk" online rate will still be cheaper and the rates below are I believe if you call.

The room rates I was quoted was $58/ night for 2 double beds or $52/ night for 1 King. Continental breakfast is included with your stay and there is a large parking lot ample room for the boats & trailers.

From Beaumont / Lake Charles (LA):
Take I-10 West to Exit 798, HWY 146, Turn left to go South. Exit Garth Rd. Stay on feeder road. Go to 2nd Lights and turn right (Decker Drive). Go down 1 mile and make a U-turn at Rollingbrook and we are located on right.

From Houston:
Take 1-10 East and Exit 788 SPUR 330. Continue until you Exit Rollingbrook. Stay on feeder rd and we are located on right.

Wallisville is located just 40 minutes East of Houston and roughly 45 min West of Beaumont area.

The hotel is within 10-15 minutes of the ramp.

Wallisville has a lot of areas to play and ride and fishing is heating up. The launch is minutes from some of the area best Saltwater Fishing. Redfish, Trout & Flounder, out of state or weekend licenses can be purchased Game Wardens do frequent the area. Academy & Walmart sell them in Baytown. I think a one day out of state license (all water) is $16 / day.

Fresh water fishing is great too plenty of healthy cats as you go up river.

Here are a few videos of Wallisville:

http://www.youtube.com/watch?v=Yh3r469UZ1w

http://www.youtube.com/watch?v=WnRQ74uXldE

I hope to see some new faces there. There are places to grill and a park at Hugo Point. I'll probably have a buddy bring a big pit out there and get some BBQ going while were all riding.

I'll be arranging use of the covered Pavilion for the weekend.

http://www.swg.usace.army.mil/Wallis/Recreation.asp (see #2) show a photo of the area.

Coe Parker
713-594-4252

_________________
GTB1860 w/ GTR35
viewtopic.php?f=5&t=955 (My Rig Review)
viewtopic.php?f=3&t=5576 (GECKER CARB= Glorified Trot Line Weight)
viewtopic.php?f=3&t=5748&p=59768 (Marsh Mellow Exhaust - Install / Review)
http://www.youtube.com/watch?v=797shKBeqC4 (Gator-Tail regular maintenance detailed)


Mon Mar 08, 2010 2:07 pm
Profile WWW
MMT Addict
User avatar

Joined: Tue Jan 13, 2009 6:11 pm
Posts: 667
Post Re: Wallisville 2010
Hope the boat is ready by then... I may actually make this one.


Mon Mar 08, 2010 6:39 pm
Profile
MMT Sponsor

Joined: Wed Jan 14, 2009 7:57 am
Posts: 281
Post Re: Wallisville 2010
There are the rv parks in Anahuac and Old River as well. The hotel on 10 in Hankamer was a bad candidate?


Mon Mar 08, 2010 7:02 pm
Profile
MMT Elite Member
User avatar

Joined: Thu Mar 05, 2009 10:11 am
Posts: 2457
Location: Houston, TX | Pirates Cove
Post Re: Wallisville 2010
drake1 wrote:
There are the rv parks in Anahuac and Old River as well. The hotel on 10 in Hankamer was a bad candidate?


Gator Motel? Yeah that guy said cash only or company checks no credit cards, no reservations either... I was like WTF? Plus it didn't come with Free Breakfast :mrgreen:

_________________
GTB1860 w/ GTR35
viewtopic.php?f=5&t=955 (My Rig Review)
viewtopic.php?f=3&t=5576 (GECKER CARB= Glorified Trot Line Weight)
viewtopic.php?f=3&t=5748&p=59768 (Marsh Mellow Exhaust - Install / Review)
http://www.youtube.com/watch?v=797shKBeqC4 (Gator-Tail regular maintenance detailed)


Mon Mar 08, 2010 8:52 pm
Profile WWW
MMT Sponsor

Joined: Wed Jan 14, 2009 7:57 am
Posts: 281
Post Re: Wallisville 2010
I thought it was a Best Western next to the Shell station up at the Highway 61 exit past Turtle Bayou. I will see what kind of details I can get on that one.


Mon Mar 08, 2010 9:09 pm
Profile
MMT Elite Member
User avatar

Joined: Thu Mar 05, 2009 10:11 am
Posts: 2457
Location: Houston, TX | Pirates Cove
Post Re: Wallisville 2010
Thanks Drake. I just tossed out one good option. If folks want to stay at that location on I-10 sounds good to me.

_________________
GTB1860 w/ GTR35
viewtopic.php?f=5&t=955 (My Rig Review)
viewtopic.php?f=3&t=5576 (GECKER CARB= Glorified Trot Line Weight)
viewtopic.php?f=3&t=5748&p=59768 (Marsh Mellow Exhaust - Install / Review)
http://www.youtube.com/watch?v=797shKBeqC4 (Gator-Tail regular maintenance detailed)


Mon Mar 08, 2010 9:27 pm
Profile WWW
MMT Addict

Joined: Wed Jan 14, 2009 1:02 pm
Posts: 574
Location: Pearland, Texas
Post Re: Wallisville 2010
Is Hugo the one with the ramp at the bottom of the hill?

_________________
16/60gd haulin a 35gdsd


Wed Mar 10, 2010 5:34 pm
Profile
MMT Elite Member
User avatar

Joined: Thu Mar 05, 2009 10:11 am
Posts: 2457
Location: Houston, TX | Pirates Cove
Post Re: Wallisville 2010
marsh bandit wrote:
Is Hugo the one with the ramp at the bottom of the hill?


Yes... two ramps at the bottom of the hill with a pavilion at the top and public restrooms.

_________________
GTB1860 w/ GTR35
viewtopic.php?f=5&t=955 (My Rig Review)
viewtopic.php?f=3&t=5576 (GECKER CARB= Glorified Trot Line Weight)
viewtopic.php?f=3&t=5748&p=59768 (Marsh Mellow Exhaust - Install / Review)
http://www.youtube.com/watch?v=797shKBeqC4 (Gator-Tail regular maintenance detailed)


Wed Mar 10, 2010 5:46 pm
Profile WWW
MMT Pro Member
User avatar

Joined: Sat Feb 21, 2009 10:39 pm
Posts: 347
Location: Pearland Tx
Post Re: Wallisville 2010
I'll be there on Sunday for sure

_________________
23 hp gdlt pushin the 14ft NoWeld "aka" the black pearl


Wed Mar 10, 2010 7:47 pm
Profile
MMT Elite Member
User avatar

Joined: Thu Mar 05, 2009 10:11 am
Posts: 2457
Location: Houston, TX | Pirates Cove
Post Re: Wallisville 2010
I talked to my buddy. For less than $10 / plate he can come out and serve BBQ: Brisket, Chicken, Sausage, all the fixings iced tea etc. I just need a head count.

I'll try and get a poll going on another thread to see who would be wanting to have Dinner brought in on Saturday to the ramp. Sunday I figured people will be leaving at all different times.

_________________
GTB1860 w/ GTR35
viewtopic.php?f=5&t=955 (My Rig Review)
viewtopic.php?f=3&t=5576 (GECKER CARB= Glorified Trot Line Weight)
viewtopic.php?f=3&t=5748&p=59768 (Marsh Mellow Exhaust - Install / Review)
http://www.youtube.com/watch?v=797shKBeqC4 (Gator-Tail regular maintenance detailed)


Wed Mar 10, 2010 7:51 pm
Profile WWW
MMT Member

Joined: Wed Sep 16, 2009 10:55 am
Posts: 44
Post Re: Wallisville 2010
Where you planning on running to ? I would like to make this one with yall if poor boy sleds are allowed. LOL According to my work schedule I will be off,and would like some more details of the ride.
Also crawfish should be kicked off by then,and I have a buddy that does crawfish catering out of Baytown if your interested,I could get him to give us some good pricing if enough peoples interested.
I live in Old River area,and if the out of towners dont feel comfortable about there boats being at a motel,im only 10 min from Hugo ramp,and have room to park 10 to 12 boats if needed after the rides.


Thu Mar 11, 2010 3:30 am
Profile
MMT Elite Member
User avatar

Joined: Thu Mar 05, 2009 10:11 am
Posts: 2457
Location: Houston, TX | Pirates Cove
Post Re: Wallisville 2010
Planning on running North of I-10 just depends upon River Flow its still up in the air as of right now but all the places we ride are all within 10 min boat ride of each other.

_________________
GTB1860 w/ GTR35
viewtopic.php?f=5&t=955 (My Rig Review)
viewtopic.php?f=3&t=5576 (GECKER CARB= Glorified Trot Line Weight)
viewtopic.php?f=3&t=5748&p=59768 (Marsh Mellow Exhaust - Install / Review)
http://www.youtube.com/watch?v=797shKBeqC4 (Gator-Tail regular maintenance detailed)


Thu Mar 11, 2010 8:27 am
Profile WWW
MMT Member

Joined: Wed Sep 16, 2009 10:55 am
Posts: 44
Post Re: Wallisville 2010
Sounds good to me. I was just curious, I know that area prettyt well also.


Thu Mar 11, 2010 5:05 pm
Profile
MMT Pro Member
User avatar

Joined: Mon Feb 16, 2009 7:09 pm
Posts: 380
Location: Cypress, TX
Post Re: Wallisville 2010
I gots a camp out at wallisville so we can party our a$$es off there! :lol: :lol:

_________________
18'44'' Go-Devil w/ Stage 1 35 GDSD
http://mudmotortalk.com/mmt_v2/viewtopic.php?f=7&t=8992


Tue Mar 16, 2010 5:54 pm
Profile
MMT Elite Member
User avatar

Joined: Thu Mar 05, 2009 10:11 am
Posts: 2457
Location: Houston, TX | Pirates Cove
Post Re: Wallisville 2010
Robn1020 wrote:
I gots a camp out at wallisville so we can party our a$$es off there! :lol: :lol:


If that's the case and no joke... I will bring a keg out there! Miller Lite unless someone has objections.

_________________
GTB1860 w/ GTR35
viewtopic.php?f=5&t=955 (My Rig Review)
viewtopic.php?f=3&t=5576 (GECKER CARB= Glorified Trot Line Weight)
viewtopic.php?f=3&t=5748&p=59768 (Marsh Mellow Exhaust - Install / Review)
http://www.youtube.com/watch?v=797shKBeqC4 (Gator-Tail regular maintenance detailed)


Tue Mar 16, 2010 5:55 pm
Profile WWW
MMT Pro Member
User avatar

Joined: Mon Feb 16, 2009 7:09 pm
Posts: 380
Location: Cypress, TX
Post Re: Wallisville 2010
WestEndAngler wrote:
Robn1020 wrote:
I gots a camp out at wallisville so we can party our a$$es off there! :lol: :lol:


If that's the case and no joke... I will bring a keg out there! Miller Lite unless someone has objections.


Fine with me. Gots a 20' by 30' deck to put it on.

_________________
18'44'' Go-Devil w/ Stage 1 35 GDSD
http://mudmotortalk.com/mmt_v2/viewtopic.php?f=7&t=8992


Tue Mar 16, 2010 6:04 pm
Profile
MMT Pro Member
User avatar

Joined: Sat Feb 21, 2009 10:39 pm
Posts: 347
Location: Pearland Tx
Post Re: Wallisville 2010
Keg of miller lite I'll be there on Saturday too then

_________________
23 hp gdlt pushin the 14ft NoWeld "aka" the black pearl


Tue Mar 16, 2010 6:29 pm
Profile
MMT Elite Member
User avatar

Joined: Thu Mar 05, 2009 10:11 am
Posts: 2457
Location: Houston, TX | Pirates Cove
Post Re: Wallisville 2010
Well we have a possibility of Crawfish & BBQ & a Keg, sounds like the makings of a good time to me :mrgreen:

_________________
GTB1860 w/ GTR35
viewtopic.php?f=5&t=955 (My Rig Review)
viewtopic.php?f=3&t=5576 (GECKER CARB= Glorified Trot Line Weight)
viewtopic.php?f=3&t=5748&p=59768 (Marsh Mellow Exhaust - Install / Review)
http://www.youtube.com/watch?v=797shKBeqC4 (Gator-Tail regular maintenance detailed)


Tue Mar 16, 2010 6:29 pm
Profile WWW
MMT Pro Member
User avatar

Joined: Wed Jan 14, 2009 9:55 pm
Posts: 250
Post Re: Wallisville 2010
Robn1020 wrote:
WestEndAngler wrote:
Robn1020 wrote:
I gots a camp out at wallisville so we can party our a$$es off there! :lol: :lol:


If that's the case and no joke... I will bring a keg out there! Miller Lite unless someone has objections.



Fine with me. Gots a 20' by 30' deck to put it on.



It is a nice place. It will be a great place to catch up only a few min. run to the locks.

_________________
18x60 GTB
35 GTR W/ evt exhaust (Mods in the works!!)


Tue Mar 16, 2010 10:15 pm
Profile
MMT 1000 Club
User avatar

Joined: Mon Oct 19, 2009 7:38 pm
Posts: 1061
Location: Groves, Texas
Post Re: Wallisville 2010
Hey Coe just found out i'll be off that weekend, think i might make it your way for a chance!

_________________
2010 Borel 18/46 Customized Boat
Camo by Ricky Of CAMO-DESIGNS
Camo Gator-Tail 35hp GTR

BPS Single Cross Over
Single Carb soon to come!

SETX PERFORMANCE
TURBO'S Custom Clutch Cover (Aluminum)
GIT'IN AND HOLD ON AND I'LL SHOW YOU WHAT THIS BAD BOY WILL DO!


Tue Mar 16, 2010 10:17 pm
Profile
MMT Elite Member
User avatar

Joined: Thu Mar 05, 2009 10:11 am
Posts: 2457
Location: Houston, TX | Pirates Cove
Post Re: Wallisville 2010
"Mud Bugs & Mud Boats"

2010 Wallisville Mud Run!
mudmotortalk.com

We need a shirt :mrgreen:

_________________
GTB1860 w/ GTR35
viewtopic.php?f=5&t=955 (My Rig Review)
viewtopic.php?f=3&t=5576 (GECKER CARB= Glorified Trot Line Weight)
viewtopic.php?f=3&t=5748&p=59768 (Marsh Mellow Exhaust - Install / Review)
http://www.youtube.com/watch?v=797shKBeqC4 (Gator-Tail regular maintenance detailed)


Tue Mar 16, 2010 11:47 pm
Profile WWW
MMT Pro Member
User avatar

Joined: Mon Feb 16, 2009 7:09 pm
Posts: 380
Location: Cypress, TX
Post Re: Wallisville 2010
I agree, bout time our neck of the woods put on an event and the shirt idea is great. Any artists in the bunch?

_________________
18'44'' Go-Devil w/ Stage 1 35 GDSD
http://mudmotortalk.com/mmt_v2/viewtopic.php?f=7&t=8992


Wed Mar 17, 2010 7:39 am
Profile
MMT Member

Joined: Wed Sep 16, 2009 10:55 am
Posts: 44
Post Re: Wallisville 2010
The back of the shirts should have a crawfish driving a mudboat,and over the top put "MUD BUGS AND MUDBOATS" and on the bottom put "WITH COLD BEER".
.Looking forward to meeting everyone.
If enough people are interested, I talked to my buddy that does the crawfish,and he is interested in doing the shirts if enough people are interested,and have some ideas for them. If you need some help with it there West End ANGLER,let me know,as im not trying to step on nobodys toes or nothing.


Thu Mar 18, 2010 8:22 pm
Profile
MMT Elite Member

Joined: Wed Jan 14, 2009 6:23 am
Posts: 1618
Location: Lafayette, La
Post Re: Wallisville 2010
Im gonna need some suggestions on how I can talk my wife into believing this is a good idea for me to be at a run on my anniversary -- LOL

_________________
18X54 X-Series 36 PD, FPR, HT

Treat every situation like a dog. If you cant eat it or screw it, Piss on it and walk away

http://www.cookdat.com


Sat Mar 20, 2010 9:47 pm
Profile
MMT Addict
User avatar

Joined: Tue Jan 13, 2009 6:11 pm
Posts: 667
Post Re: Wallisville 2010
Well if she is into the whole mud boat thing I think it would be a fun anniversary present, but if she isn't your plans are shot to h....e....double hockey sticks.


Sun Mar 21, 2010 8:54 am
Profile
MMT Elite Member
User avatar

Joined: Tue Jan 13, 2009 8:19 pm
Posts: 1325
Location: Trinity Bay - Texas
Post Re: Wallisville 2010
BradS wrote:
Im gonna need some suggestions on how I can talk my wife into believing this is a good idea for me to be at a run on my anniversary -- LOL


Diamonds - special ordered at a Houston jewelry store - the Mojo Box !

_________________
Eat - Sleep - Hunt ! ! !

http://texasbackwater.com/

"It is good to have an end to journey toward; but
it is the journey that matters, in the end."


Sun Mar 21, 2010 8:57 am
Profile
MMT Elite Member

Joined: Tue Jan 13, 2009 9:02 pm
Posts: 2779
Location: Bossier City
Post Re: Wallisville 2010
BradS wrote:
Im gonna need some suggestions on how I can talk my wife into believing this is a good idea for me to be at a run on my anniversary -- LOL


Take her with you........... :mrgreen:

_________________
18x48 Charles Leonard / 36PD

"I'm not a gynocologist, but I'll take a look anyway"


Sun Mar 21, 2010 11:05 am
Profile
MMT Elite Member

Joined: Wed Jan 14, 2009 6:23 am
Posts: 1618
Location: Lafayette, La
Post Re: Wallisville 2010
POKER1 wrote:
BradS wrote:
Im gonna need some suggestions on how I can talk my wife into believing this is a good idea for me to be at a run on my anniversary -- LOL


Take her with you........... :mrgreen:


And what --- end up in a fancy ass hotel in the closest big city -- LOL

_________________
18X54 X-Series 36 PD, FPR, HT

Treat every situation like a dog. If you cant eat it or screw it, Piss on it and walk away

http://www.cookdat.com


Sun Mar 21, 2010 11:41 am
Profile
MMT Addict
User avatar

Joined: Tue Jan 13, 2009 6:11 pm
Posts: 667
Post Re: Wallisville 2010
Galleria in Houston.... Ride in the morning if she is up for it then take her shopping in the afternoon and a really elegant dinner.


Sun Mar 21, 2010 1:25 pm
Profile
MMT Elite Member

Joined: Tue Sep 29, 2009 4:08 pm
Posts: 1110
Location: Longview Tx
Post Re: Wallisville 2010
Boats + Bugs + Beer = Good Time :lol:

_________________
ETD88 09/28/09-05/14/2010...


Mon Mar 22, 2010 1:00 pm
Profile
MMT Elite Member
User avatar

Joined: Thu Mar 05, 2009 10:11 am
Posts: 2457
Location: Houston, TX | Pirates Cove
Post Re: Wallisville 2010
TOWBOATER wrote:
The back of the shirts should have a crawfish driving a mudboat,and over the top put "MUD BUGS AND MUDBOATS" and on the bottom put "WITH COLD BEER".
.Looking forward to meeting everyone.
If enough people are interested, I talked to my buddy that does the crawfish,and he is interested in doing the shirts if enough people are interested,and have some ideas for them. If you need some help with it there West End ANGLER,let me know,as im not trying to step on nobodys toes or nothing.


I got plenty of toes and am open to many suggestions... I forwarded this information along to a designer I've been wanting to use... I think he can do good work. If we have others that are running with designs that's fine.

I believe Josh has a good price on Koozies and offered to help me in that area. I'm looking forward to what they come up with and I will share with everyone once they send me some design concepts.

_________________
GTB1860 w/ GTR35
viewtopic.php?f=5&t=955 (My Rig Review)
viewtopic.php?f=3&t=5576 (GECKER CARB= Glorified Trot Line Weight)
viewtopic.php?f=3&t=5748&p=59768 (Marsh Mellow Exhaust - Install / Review)
http://www.youtube.com/watch?v=797shKBeqC4 (Gator-Tail regular maintenance detailed)


Mon Mar 22, 2010 1:47 pm
Profile WWW
MMT Elite Member
User avatar

Joined: Thu Mar 05, 2009 10:11 am
Posts: 2457
Location: Houston, TX | Pirates Cove
Post Re: Wallisville 2010
I will need someone to help assist in Mud Bugs... I'm no expert. I know I can arrange someone to come cook 'em but if someone has a whole mobile thing going (which I think I read somewhere) then maybe its best to do that.


Feel free to call me and we can chat. More people assisting and helping out the better. 713-594-4252.

Coe

_________________
GTB1860 w/ GTR35
viewtopic.php?f=5&t=955 (My Rig Review)
viewtopic.php?f=3&t=5576 (GECKER CARB= Glorified Trot Line Weight)
viewtopic.php?f=3&t=5748&p=59768 (Marsh Mellow Exhaust - Install / Review)
http://www.youtube.com/watch?v=797shKBeqC4 (Gator-Tail regular maintenance detailed)


Mon Mar 22, 2010 1:48 pm
Profile WWW
MMT Elite Member

Joined: Tue Sep 29, 2009 4:08 pm
Posts: 1110
Location: Longview Tx
Post Re: Wallisville 2010
Coe, ive been goin over this "logo/tshirt" deal for a while. I did some design stuff in high school. Its been too long for me to pull some chit together but just a thought. If you happen to pick some design that has a mudbug drivin a boat, What boat? What motor? you dont want to have chit started and people bichin cuz the "wallisville bug boat" is a Gator-tail or a Prodrive :lol: :lol: I could just see DDM whinin cuz theres a PD or Giga protestin cuz a GTs on there lol anyway, just a random thought. im waaay too bored at work today :lol:

_________________
ETD88 09/28/09-05/14/2010...


Mon Mar 22, 2010 4:29 pm
Profile
MMT Elite Member
User avatar

Joined: Thu Mar 05, 2009 10:11 am
Posts: 2457
Location: Houston, TX | Pirates Cove
Post Re: Wallisville 2010
EasTexDux88 wrote:
Coe, ive been goin over this "logo/tshirt" deal for a while. I did some design stuff in high school. Its been too long for me to pull some chit together but just a thought. If you happen to pick some design that has a mudbug drivin a boat, What boat? What motor? you dont want to have chit started and people bichin cuz the "wallisville bug boat" is a Gator-tail or a Prodrive :lol: :lol: I could just see DDM whinin cuz theres a PD or Giga protestin cuz a GTs on there lol anyway, just a random thought. im waaay too bored at work today :lol:


Its my shirt design, my ride.... GTR baby! :lol: :lol: :lol:

LOL no just kidding all...

You bring up a good point but i think we will leave it simple design and not get real DETAILED with the looks of the Mud Motor... I did send the designer the links to Pro Drive, Gator-Tail, MudBuddy & Go Devil. Maybe with some nods of heads we can use their logos? That would require calling and getting blessings though... Just a thought cause I too am WAY too bored at work :lol: :lol:

_________________
GTB1860 w/ GTR35
viewtopic.php?f=5&t=955 (My Rig Review)
viewtopic.php?f=3&t=5576 (GECKER CARB= Glorified Trot Line Weight)
viewtopic.php?f=3&t=5748&p=59768 (Marsh Mellow Exhaust - Install / Review)
http://www.youtube.com/watch?v=797shKBeqC4 (Gator-Tail regular maintenance detailed)


Mon Mar 22, 2010 4:37 pm
Profile WWW
MMT Elite Member

Joined: Tue Sep 29, 2009 4:08 pm
Posts: 1110
Location: Longview Tx
Post Re: Wallisville 2010
yeah, my thoughts too. Maybe just put the logos somewhere on the shirts. but, that may be more complicated than just a phone call. Hell, i dont care whats on em. I'm goin to try and make it if i can Bum a ride with someone in a boat. lol If not, i'll just sit in my office and look at the pics like i always do :lol: :lol:

_________________
ETD88 09/28/09-05/14/2010...


Mon Mar 22, 2010 4:43 pm
Profile
MMT Pro Member
User avatar

Joined: Mon Feb 16, 2009 7:09 pm
Posts: 380
Location: Cypress, TX
Post Re: Wallisville 2010
WestEndAngler wrote:
EasTexDux88 wrote:
Coe, ive been goin over this "logo/tshirt" deal for a while. I did some design stuff in high school. Its been too long for me to pull some chit together but just a thought. If you happen to pick some design that has a mudbug drivin a boat, What boat? What motor? you dont want to have chit started and people bichin cuz the "wallisville bug boat" is a Gator-tail or a Prodrive :lol: :lol: I could just see DDM whinin cuz theres a PD or Giga protestin cuz a GTs on there lol anyway, just a random thought. im waaay too bored at work today :lol:


Its my shirt design, my ride.... GTR baby! :lol: :lol: :lol:

LOL no just kidding all...

You bring up a good point but i think we will leave it simple design and not get real DETAILED with the looks of the Mud Motor... I did send the designer the links to Pro Drive, Gator-Tail, MudBuddy & Go Devil. Maybe with some nods of heads we can use their logos? That would require calling and getting blessings though... Just a thought cause I too am WAY too bored at work :lol: :lol:


You gonna include the smoke and leaky fluid? :lol:

_________________
18'44'' Go-Devil w/ Stage 1 35 GDSD
http://mudmotortalk.com/mmt_v2/viewtopic.php?f=7&t=8992


Tue Mar 23, 2010 8:13 am
Profile
MMT Elite Member
User avatar

Joined: Thu Mar 05, 2009 10:11 am
Posts: 2457
Location: Houston, TX | Pirates Cove
Post Re: Wallisville 2010
Robn1020 wrote:
WestEndAngler wrote:
EasTexDux88 wrote:
Coe, ive been goin over this "logo/tshirt" deal for a while. I did some design stuff in high school. Its been too long for me to pull some chit together but just a thought. If you happen to pick some design that has a mudbug drivin a boat, What boat? What motor? you dont want to have chit started and people bichin cuz the "wallisville bug boat" is a Gator-tail or a Prodrive :lol: :lol: I could just see DDM whinin cuz theres a PD or Giga protestin cuz a GTs on there lol anyway, just a random thought. im waaay too bored at work today :lol:


Its my shirt design, my ride.... GTR baby! :lol: :lol: :lol:

LOL no just kidding all...

You bring up a good point but i think we will leave it simple design and not get real DETAILED with the looks of the Mud Motor... I did send the designer the links to Pro Drive, Gator-Tail, MudBuddy & Go Devil. Maybe with some nods of heads we can use their logos? That would require calling and getting blessings though... Just a thought cause I too am WAY too bored at work :lol: :lol:


You gonna include the smoke and leaky fluid? :lol:


Do you want a keg or not? :lol: You might get the dead sack of mud bugs if your not careful :lol: :lol: :lol: :lol:

I was thinking about this design last night:


4 Mud Boats all 4 big name brands... abbreviated of course as to avoid copyright issues, I'm not going to be using "logos" so PD, GTR, MB & GD written on side of 4 engines with 4 mud bugs hanging out drinking beer each on the respective rig sounds good to me... Thoughts? Think it will get too busy?

_________________
GTB1860 w/ GTR35
viewtopic.php?f=5&t=955 (My Rig Review)
viewtopic.php?f=3&t=5576 (GECKER CARB= Glorified Trot Line Weight)
viewtopic.php?f=3&t=5748&p=59768 (Marsh Mellow Exhaust - Install / Review)
http://www.youtube.com/watch?v=797shKBeqC4 (Gator-Tail regular maintenance detailed)


Tue Mar 23, 2010 9:03 am
Profile WWW
MMT 1000 Club
User avatar

Joined: Mon Oct 19, 2009 7:38 pm
Posts: 1061
Location: Groves, Texas
Post Re: Wallisville 2010
Sounds good or you could just put MMT on the calan of the motor thats going to be on the boat in the Pic. That way no controversy

_________________
2010 Borel 18/46 Customized Boat
Camo by Ricky Of CAMO-DESIGNS
Camo Gator-Tail 35hp GTR

BPS Single Cross Over
Single Carb soon to come!

SETX PERFORMANCE
TURBO'S Custom Clutch Cover (Aluminum)
GIT'IN AND HOLD ON AND I'LL SHOW YOU WHAT THIS BAD BOY WILL DO!


Tue Mar 23, 2010 12:10 pm
Profile
MMT Elite Member
User avatar

Joined: Thu Mar 05, 2009 10:11 am
Posts: 2457
Location: Houston, TX | Pirates Cove
Post Re: Wallisville 2010
True & just make it look like a GTR :lol: :lol:

We'll see what they come up with...

_________________
GTB1860 w/ GTR35
viewtopic.php?f=5&t=955 (My Rig Review)
viewtopic.php?f=3&t=5576 (GECKER CARB= Glorified Trot Line Weight)
viewtopic.php?f=3&t=5748&p=59768 (Marsh Mellow Exhaust - Install / Review)
http://www.youtube.com/watch?v=797shKBeqC4 (Gator-Tail regular maintenance detailed)


Tue Mar 23, 2010 12:18 pm
Profile WWW
MMT Pro Member
User avatar

Joined: Mon Feb 16, 2009 7:09 pm
Posts: 380
Location: Cypress, TX
Post Re: Wallisville 2010
I gots two spots at my camp which is on the water there. One on the futon and one on a cot. All ya gotta do is supply the beer.

_________________
18'44'' Go-Devil w/ Stage 1 35 GDSD
http://mudmotortalk.com/mmt_v2/viewtopic.php?f=7&t=8992


Fri Mar 26, 2010 8:01 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 50 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

Powered by
Graphic Details Digital Media
[ Time : 0.155s | 11 Queries | GZIP : Off ]

 

image linking to 100 Top Birds and Waterfowl Sites