Once in production, is it going to come out of Mexico or China?
Is it first or second melt?
What Rockwell is it also?
| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| SETXPerformance 3 Blade GO FAST Prop http://mudmotortalk.com/mmt_v2/viewtopic.php?f=7&t=14988 |
Page 1 of 2 |
| Author: | chops3131 [ Thu Dec 30, 2010 7:34 pm ] |
| Post subject: | SETXPerformance 3 Blade GO FAST Prop |
The props are going to take longer now because the last ones i got from Ron Hill run slower than the Tiger prop. They are way out of balance, not pitched correctly, wont fit the shafts with out working them out, I am seeking a new manufacture for my blade seeing that he is going to do what he wants to do and the quality is not there for a production prop. He is also selling them as a "Ron Hill" prop if you buy the prop from him it is not a SETX prop and will run slower than the SETX prop. SETXPerformance 3 Blade Prop I'm in the final testing stages of putting this prop on the market and will soon be taking orders for it. It is designed to run deep water for those who need higher speeds for fishing. It has not been tested in the mud yet. Some of you have seen this prop in a post I made a while back. Price will be some were around $325 It is a progressive pitch 12x13 |
|
| Author: | DeathMetalDukk [ Thu Dec 30, 2010 7:41 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
Is it gonna come in all the SD manufacturer's bores, or just MB? |
|
| Author: | chops3131 [ Thu Dec 30, 2010 7:44 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
Just 3/4 hex for now (MB & GT) |
|
| Author: | Woodiebuster [ Thu Dec 30, 2010 7:53 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
how much motor does it take to turn it? |
|
| Author: | chops3131 [ Thu Dec 30, 2010 8:04 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
It will take at least a slightly modded 35 to turn it |
|
| Author: | BabyMatt [ Thu Dec 30, 2010 8:14 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
What does slightly modded consist of? |
|
| Author: | chops3131 [ Thu Dec 30, 2010 8:18 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
| Author: | duck~killer [ Thu Dec 30, 2010 8:33 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
What kind of speeds are you getting with it. |
|
| Author: | chops3131 [ Thu Dec 30, 2010 8:38 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
45mph with my motor on a 1744 and the wheel pitched to 17 |
|
| Author: | duck~killer [ Thu Dec 30, 2010 8:40 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
Daaaammmmm!!!!!! thats some nice speeds there. |
|
| Author: | Skipr [ Thu Dec 30, 2010 8:41 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
| Author: | UNCLE-J [ Thu Dec 30, 2010 8:44 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
No love= Prodrive |
|
| Author: | chops3131 [ Thu Dec 30, 2010 8:45 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
| Author: | chops3131 [ Thu Dec 30, 2010 8:47 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
| Author: | shallow water master [ Thu Dec 30, 2010 10:00 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
| Author: | chops3131 [ Thu Dec 30, 2010 10:08 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
| Author: | saveontaxes [ Thu Dec 30, 2010 11:27 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
sand:?: |
|
| Author: | Labs4Life [ Thu Dec 30, 2010 11:36 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
i was looking for something like this for when running the rivers fishing in spring think and hd 4000 be able to handle it? |
|
| Author: | DeathMetalDukk [ Fri Dec 31, 2010 4:31 am ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
| Author: | Robn1020 [ Fri Dec 31, 2010 7:45 am ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
| Author: | BROOKS [ Fri Dec 31, 2010 9:44 am ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
| Author: | DeathMetalDukk [ Fri Dec 31, 2010 9:54 am ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
| Author: | shallow water master [ Fri Dec 31, 2010 5:55 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
| Author: | 50fps [ Fri Dec 31, 2010 5:56 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
Once in production, is it going to come out of Mexico or China? Is it first or second melt? What Rockwell is it also?
|
|
| Author: | BayouStateHunter [ Fri Dec 31, 2010 10:39 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
Chops I know this is hard to answer but how much speed can you expect to gain - 1860 Gtr stg 1? Is 5 mph+ feasible? |
|
| Author: | chops3131 [ Sat Jan 01, 2011 5:41 am ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
| Author: | chops3131 [ Sat Jan 01, 2011 5:43 am ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
| Author: | chops3131 [ Sat Jan 01, 2011 6:14 am ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
| Author: | 50fps [ Sat Jan 01, 2011 12:02 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
| Author: | BayouStateHunter [ Sat Jan 01, 2011 12:31 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
| Author: | DeathMetalDukk [ Sat Jan 08, 2011 9:30 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
For somebody not wanting to mod their GTR, what's the best speed prop for fishing around in the summer? Or perhaps very mild mods, like exhaust/filter and possibly a carb. |
|
| Author: | chops3131 [ Thu Jan 20, 2011 2:51 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
| Author: | dguidry [ Thu Jan 20, 2011 3:16 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
You think it would work on a stock GTR23....I mean go fast? |
|
| Author: | meterman3 [ Thu Jan 20, 2011 3:29 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
i no that u do not have one for pro yet but is there enough meat that my machine shop can cut a taper in the hex ? |
|
| Author: | chops3131 [ Thu Jan 20, 2011 5:02 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
| Author: | Matt [ Thu Jan 20, 2011 5:04 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
So what is the difference in the two? |
|
| Author: | chops3131 [ Thu Jan 20, 2011 5:05 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
| Author: | SMELVIN [ Thu Jan 20, 2011 5:47 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
| Author: | Gigafowl [ Thu Jan 20, 2011 5:56 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
| Author: | coondik [ Thu Jan 20, 2011 6:57 pm ] |
| Post subject: | Re: SETXPerformance 3 Blade GO FAST Prop |
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|