I am putting my gas tank in the front of the boat, so I need to run a new, longer fuel line from the tank to the motor. What brand of fuel line is recommended and where do I get it? I will probably use 1/4" line, and I saw a Sierra recommendation on here somewhere, so I thought I would ask again.

it dosnt matter..............if u have to ask this question get sombody to put it in for you also

I got mine from Auto Zone

Brad,
I got mine from an outboard shop.. if your going to run ya tank from the front, I would suggest these two things - Fuel Pump, and bigger fuel line than 1/4..

I like round black fuel line myself

Snuggs I can't find any of dat square around MC, was it a special order type deal?

I use 10/32" fuel line

Auto Zone has Goodyear/Marine grade 1/4" fuel line & all the fittings.When that wears out, I`ll probably get some of that high dollar SIERRA.

I use 1/4" Quick Silver (Mercury) fuel line with a Racor separator/filter at the transom.

Poker, I don't know if this is the Merc fuel line you are talking about, but it caused me a major headache with my bass rig.

I CANT FIND THE SQUARE ONE ANYWERE !!!

as long as its not a left handed screw driver

Dont mention it man....the pleasure is all mine.

If you have anymore questions let me know.

and i can play with my metric screwdriver......

I bet this fella gets some crasy looks when he is lookn for the 10/32 line........

I wish coke was still cola,
and a joint... was a bad place to be.

The only time I have ever tried to snort coke,,,,,,,,,,,,,,,I almost drowned.

Sumbody help me out here .... why in the photo of the fuel line on this thread
is thay a line inside of a line ?? Don't make since to me at all ....

Back before elvis
before the Veitmam war cam along

Are we rollin downhill like a snowball headed for hell?

With no kind of chance for the flag or the liberty bell

and yes Coarline ... a man will do that .. sometimes on his own ...

I wish a ford and a chevy would still last ten years like they should

Wish I knew the answer to that Brooks. Didn't know there was a problem with it until I fished a little tourney on Toledo Bend earlier in the year. We cut across to the Texas side and then back, fished a little more, and then started having trouble. Everything was fine on top-end I would just have to start off slowly to get on step. When I got it home I wanted to drain the tank, so I took the hose off the motor and started pumping the bulb. A chit load of plastic came out. I cut the fuel line open and that is what I found. That was a Mercury fuel line which came with the bulb the last time the bulb was changed.