MudmotorTalk.com
http://mudmotortalk.com/mmt_v2/

Machinists!
http://mudmotortalk.com/mmt_v2/viewtopic.php?f=7&t=43047		 Page 1 of 1
Author:  Bigbuckfever [ Wed Jul 17, 2013 8:30 pm ]
Post subject:  Machinists!
Do your programmers take .060" z steps in heat treated h13 with a 2.0" button cutter? Mine do.....

Sent from my DROID RAZR using Tapatalk 2
Author:  bubba777 [ Thu Jul 18, 2013 5:55 am ]
Post subject:  Re: Machinists!
Author:  bubba777 [ Thu Jul 18, 2013 5:59 am ]
Post subject:  Re: Machinists!
Most cutters are not made to plunge unless you are half with of insert. But sometimes you have to stay in the cut to save time !!!!!! I do cut some stuff whils z axis is locked and rotate with 4th axis and cut like that. But not to often


Sent from your wife phone !!
B
Author:  Gtr18x42 [ Thu Jul 18, 2013 6:42 am ]
Post subject:  Re: Machinists!
Author:  Louisianaboy [ Thu Jul 18, 2013 7:06 am ]
Post subject:  Re: Machinists!
Author:  dwight37 [ Thu Jul 18, 2013 7:34 am ]
Post subject:  Re: Machinists!
Grab ya alittle of that!!
4 1/2 drill hanging out 3ft
Had to bury it bag deep
Author:  Gtr18x42 [ Thu Jul 18, 2013 8:57 am ]
Post subject:  Re: Machinists!
Author:  dwight37 [ Thu Jul 18, 2013 9:07 am ]
Post subject:  Re: Machinists!
Actually those allied drills don't make any noise at all
Push them around 75 sfm and it sounds like nickels hitting the door
Author:  bubba777 [ Thu Jul 18, 2013 9:23 am ]
Post subject:  Re: Machinists!
Author:  Kmoppert [ Thu Jul 18, 2013 9:39 am ]
Post subject:  Re: Machinists!
I deal with a ton of mfg at work. Mainly sales, quoting, prints, etc. I never get to see the machinging side of things since my Fastenal shop is in Winona, MN. One of the largest in the country I believe - 225 CNCs, a few 4 and 5 axis, cold heading division, water jet, 10 EDMs, you name it we've got it. I would love to learn about the machining side of it. I'm going up in September to learn more about it. But y'all are peaking my interest right now since I have no idea what you're talking about. :lol:
Author:  bubba777 [ Thu Jul 18, 2013 9:46 am ]
Post subject:  Re: Machinists!
Author:  Gtr18x42 [ Thu Jul 18, 2013 10:01 am ]
Post subject:  Re: Machinists!
X2^^^ and we not far from u


Sent from my iPhone using Tapatalk
Author:  bayouboy [ Thu Jul 18, 2013 10:14 am ]
Post subject:  Re: Machinists!
:o I wanna go!!
Author:  Kmoppert [ Thu Jul 18, 2013 10:20 am ]
Post subject:  Re: Machinists!
Author:  Bigbuckfever [ Thu Jul 18, 2013 11:17 am ]
Post subject:  Re: Machinists!
Author:  Goose Crumpler [ Thu Jul 18, 2013 11:20 am ]
Post subject:  Re: Machinists!
Kmoppert, I was on the crew that built that place. Place is huge, it felt like that job would never get done.
Author:  Kmoppert [ Thu Jul 18, 2013 11:47 am ]
Post subject:  Re: Machinists!
Author:  dwight37 [ Thu Jul 18, 2013 11:49 am ]
Post subject:  Re: Machinists!
Bubba!
That was 4140 ph I was drillng that day!!
Shit your only talking about 63rpms at 75sfm
Author:  dwight37 [ Thu Jul 18, 2013 11:52 am ]
Post subject:  Re: Machinists!
I'd rather work on the large stuff myself

Seems like te smaller the more difficult
Author:  Goose Crumpler [ Thu Jul 18, 2013 11:58 am ]
Post subject:  Re: Machinists!
That factory sits on a marsh that old man Schwab filled in. I had a key to the gate that led to that marsh, hunted the hell outta that with my old 18 hp gdlt. Worked on almost all of those factories over there. Sometimes I miss the scenery in that town if ya know what I'm talking about.
Author:  Kmoppert [ Thu Jul 18, 2013 1:22 pm ]
Post subject:  Re: Machinists!
That's awesome. I bet the ducks are dumb as rocks up there. I'd love to get in on that! The ducks have PhDs by the time they get to us...
Author:  Goose Crumpler [ Thu Jul 18, 2013 1:37 pm ]
Post subject:  Re: Machinists!
There not dumb up here, we have so many skyblasters/duck commander wannabe's/douche bags the ducks wise in a day or two. But after the first few weeks they are all out chasing ditch goats and it gets better. Still a lot of hunters but the ones left have some ethics.
Author:  Kmoppert [ Thu Jul 18, 2013 1:44 pm ]
Post subject:  Re: Machinists!
Ditch goats...?
Author:  Goose Crumpler [ Thu Jul 18, 2013 1:51 pm ]
Post subject:  Re: Machinists!
Deer
Author:  dwight37 [ Thu Jul 18, 2013 2:11 pm ]
Post subject:  Re: Machinists!
The ducks have PhDs here also
I think all the dumb ones are killed above the border. Ah!!
Author:  Gtr18x42 [ Thu Jul 18, 2013 7:10 pm ]
Post subject:  Re: Machinists!
Author:  Kmoppert [ Thu Jul 18, 2013 7:21 pm ]
Post subject:  Re: Machinists!
Author:  Gtr18x42 [ Thu Jul 18, 2013 7:28 pm ]
Post subject:  Re: Machinists!
Lmao aww yea


Sent from my iPhone using Tapatalk
Author:  Gtr18x42 [ Thu Jul 18, 2013 7:28 pm ]
Post subject:  Re: Machinists!
U prolly been there if u no him


Sent from my iPhone using Tapatalk
Author:  Kmoppert [ Thu Jul 18, 2013 7:34 pm ]
Post subject:  Re: Machinists!
Been there to drop things off. Never been in the back.
Author:  bubba777 [ Thu Jul 18, 2013 7:49 pm ]
Post subject:  Re: Machinists!
Author:  Gtr18x42 [ Thu Jul 18, 2013 8:20 pm ]
Post subject:  Re: Machinists!
Author:  bayouboy [ Thu Jul 18, 2013 11:46 pm ]
Post subject:  Re: Machinists!
I really didn't want to go anyway! And I hope the electricity goes out just before you get there!!
Author:  AKA Freshwaterkilla [ Thu Jul 18, 2013 11:49 pm ]
Post subject:  Re: Machinists!
Author:  Gtr18x42 [ Fri Jul 19, 2013 6:14 am ]
Post subject:  Re: Machinists!
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/