Author |
Message |
biglinz1
MMT Member
Joined: Thu May 01, 2014 6:45 pm Posts: 44
|
Extrema 2 misfire problem
The last two times I have been out my gun has not gone off when I pulled the trigger. There is no mark on the primer on the shell then I cycle it by hand to eject the shell and it fires it was not the first time I had shot either day. The gun works fine before and after that happens.
|
Sat Dec 24, 2016 1:06 pm |
|
|
wade_660
MMT Addict
Joined: Mon Mar 21, 2011 7:56 pm Posts: 523
|
Re: Extrema 2 misfire problem
Check the o-ring at the top of the forearm. Pretty common issue. If you can't find it, pm me and I'll send you a pic of where it's at.
Sent from my iPhone using Tapatalk
|
Sat Dec 24, 2016 5:29 pm |
|
|
teammarshmafia
MMT Pro Member
Joined: Tue May 14, 2013 2:18 pm Posts: 478 Location: southeast, Louisiana
|
Re: Extrema 2 misfire problem
When was the last time you took the bolt apart and cleaned it reason I asked is I've had some gummy trash built up on the firing pin on mine and it did the same thing
Sent from my SAMSUNG-SM-G890A using Tapatalk
_________________ Gen III Pro Drive with a JBP stage 2 pushin 18x54 madmancustom Jus nut up and grab a handful of throttle
|
Sat Dec 24, 2016 7:15 pm |
|
|
biglinz1
MMT Member
Joined: Thu May 01, 2014 6:45 pm Posts: 44
|
Re: Extrema 2 misfire problem
I am gonna check that o ring. I cleaned it not too long ago but I put that thing thru the ringer. I am gonna pull it completely apart and clean it up real good.
|
Sat Dec 24, 2016 9:10 pm |
|
|
wade_660
MMT Addict
Joined: Mon Mar 21, 2011 7:56 pm Posts: 523
|
Re: Extrema 2 misfire problem
Look at #22.
Sent from my iPhone using Tapatalk
|
Sat Dec 24, 2016 10:16 pm |
|
|
DUCK HEARSE
MMT 1000 Club
Joined: Fri Apr 06, 2012 8:48 am Posts: 3161 Location: Alabama
|
Re: Extrema 2 misfire problem
Common on first shot if you don't release action fast and hard it will not set right against the shell and will misfire.
_________________ Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover. - Mark Twain
|
Sun Dec 25, 2016 12:44 pm |
|
|
biglinz1
MMT Member
Joined: Thu May 01, 2014 6:45 pm Posts: 44
|
Re: Extrema 2 misfire problem
Ok will check that O-ring. But now that you mention that I did change the shell in the chamber when I did do it I did it slow without racking it hard so it would not kick the shell too far that may be my issue but i will check it all out thanks for the help.
|
Sun Dec 25, 2016 9:58 pm |
|
|
Crews
MMT 1000 Club
Joined: Wed Jan 14, 2009 9:07 pm Posts: 2260 Location: Lafayette
|
Re: Extrema 2 misfire problem
Also, general tip: don't use regular CLP/petroleum based products to clean the gas system.
Sent from my iPhone using Tapatalk
_________________ 24x60 Dual Prodrives
|
Thu Dec 29, 2016 3:51 pm |
|
|
JIMMY W
MMT 1000 Club
Joined: Tue Jan 13, 2009 8:02 pm Posts: 4534 Location: South Louisiana
|
Re: Extrema 2 misfire problem
Throw that pile of shit in dumpster and go get yourself a new A5
_________________ 17/54 GT EXTREME Center Console, Huntdeck w/ GTR 35
Hoyt Mods and some other goodies
|
Sat Dec 31, 2016 4:50 pm |
|
|
teammarshmafia
MMT Pro Member
Joined: Tue May 14, 2013 2:18 pm Posts: 478 Location: southeast, Louisiana
|
Re: Extrema 2 misfire problem
^Lmao! An A5 couldnt hold up to half the shit my extrema 2 has been through
Sent from my SAMSUNG-SM-G890A using Tapatalk
_________________ Gen III Pro Drive with a JBP stage 2 pushin 18x54 madmancustom Jus nut up and grab a handful of throttle
|
Thu Jan 05, 2017 5:01 pm |
|
|
Andy
MMT Pro Member
Joined: Tue Oct 27, 2015 9:44 pm Posts: 278 Location: Coral Springs, FL
|
Re: Extrema 2 misfire problem
_________________ Gator Trax 1750HD powered by a Mud Buddy 5500 BAMF -Unbaffled VooDoo -Gator Glide G2 with base -Wet Sounds Stealth 10 Ultra V2 -Green LED Courtesy Lights -15" Combo LED Light Bar
|
Thu Jan 05, 2017 7:51 pm |
|
|
|