MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
Emergency- I need a large die http://mudmotortalk.com/mmt_v2/viewtopic.php?f=78&t=37678 |
Page 1 of 1 |
Author: | chaseh [ Fri Feb 15, 2013 11:19 am ] |
Post subject: | Emergency- I need a large die |
My threads are fucked on my godevil where the lower seal housing by the prop screws on. I think it's 1-1/4 or so diameter. Anyone have any dies this big???? Help me! 254-716-2116. I'll be coming from Waco Texas and was planning on leaving at 1! |
Author: | Kmoppert [ Fri Feb 15, 2013 12:18 pm ] |
Post subject: | Re: Emergency- I need a large die |
It's a 1"-11 1/2 TPI. Just had a guy at work looking for the exact same thing. Weird. I've checked to see if a Fastenal around you has any, but did not find one. It's pipe thread though. Not bolt thread. |
Author: | chaseh [ Fri Feb 15, 2013 1:17 pm ] |
Post subject: | Re: Emergency- I need a large die |
Can you check college station/Houston/Conroe/ Beaumont etc? Assuming you work there and its easier for you... If not, don't worry about it |
Author: | chaseh [ Fri Feb 15, 2013 2:09 pm ] |
Post subject: | Re: Emergency- I need a large die |
Not looking good. But I did just get a hold of 1" pipe thread die, so we'll see what happens tonight |
Author: | Kmoppert [ Fri Feb 15, 2013 2:12 pm ] |
Post subject: | Re: Emergency- I need a large die |
Author: | Kmoppert [ Fri Feb 15, 2013 2:15 pm ] |
Post subject: | Re: Emergency- I need a large die |
It's straight. NPS should work. Don't believe it's a taper. |
Author: | chaseh [ Fri Feb 15, 2013 2:30 pm ] |
Post subject: | Re: Emergency- I need a large die |
Mine sure looks tapered now! Haha please bring it Cody. |
Author: | chaseh [ Fri Feb 15, 2013 2:31 pm ] |
Post subject: | Re: Emergency- I need a large die |
Charles at godevil said I could use one of theirs. Any one going by there??? |
Author: | Kmoppert [ Fri Feb 15, 2013 2:36 pm ] |
Post subject: | Re: Emergency- I need a large die |
Ah, yes, definitely tapered. The guy that came into my branch this morning only had that bushing seal. |
Author: | chaseh [ Fri Feb 15, 2013 3:34 pm ] |
Post subject: | Re: Emergency- I need a large die |
Author: | Team Camo [ Fri Feb 15, 2013 5:00 pm ] |
Post subject: | Re: Emergency- I need a large die |
PM Meatwagon. He had to rebuild his L/U after the ride last year, & I think he had to buy one. He's also here in SETX |
Author: | chaseh [ Mon Feb 18, 2013 7:27 pm ] |
Post subject: | Re: Emergency- I need a large die |
Huge thanks to Cody for getting me ready for the run at 1100 the night before! You earned my respect for sure! And thanks for not letting me live with embarrassment of being stuck in the moon pond for a while and getting circled by the gators.... Haha |
Author: | chaseh [ Mon Feb 18, 2013 8:17 pm ] |
Post subject: | Re: Emergency- I need a large die |
Author: | take'emgator [ Mon Feb 18, 2013 8:30 pm ] |
Post subject: | Re: Emergency- I need a large die |
^^^^ ![]() |
Author: | chaseh [ Mon Feb 18, 2013 8:35 pm ] |
Post subject: | Re: Emergency- I need a large die |
Author: | chaseh [ Mon Feb 18, 2013 8:46 pm ] |
Post subject: | Re: Emergency- I need a large die |
Author: | 270Handiman [ Mon Feb 18, 2013 9:11 pm ] |
Post subject: | Re: Emergency- I need a large die |
Chase, was that you that helped pull the guy with the broke prop shaft back sat. afternoon? The guy that got in the boat with me had "Chase" on his shirt but I think he said his name was Jeff or something. |
Author: | chaseh [ Mon Feb 18, 2013 9:15 pm ] |
Post subject: | Re: Emergency- I need a large die |
Author: | AKA Freshwaterkilla [ Mon Feb 18, 2013 9:20 pm ] |
Post subject: | Re: Emergency- I need a large die |
Author: | 270Handiman [ Mon Feb 18, 2013 9:23 pm ] |
Post subject: | Re: Emergency- I need a large die |
Lol, I wasn't gonna open that can of worms!:shock: You should have told me that, I could have pulled him just as easy. I was behind him when the prop and all flew off, so I pulled beside him about the time you pulled up in front. Anyway, good to meet you and thanks for helping out. |
Author: | chaseh [ Mon Feb 18, 2013 9:28 pm ] |
Post subject: | Re: Emergency- I need a large die |
Author: | take'emgator [ Mon Feb 18, 2013 9:32 pm ] |
Post subject: | Re: Emergency- I need a large die |
Author: | 270Handiman [ Mon Feb 18, 2013 9:45 pm ] |
Post subject: | Re: Emergency- I need a large die |
I saw it happen, and I know about where the prop would be if there's much left to it. When his motor over-revved, he pulled the shaft out of the water and there was just a hole. Looked kinda like a jet propelled GT, just wouldn't go anywhere. It broke off about 3" inside the housing. I started to take a picture but I felt bad for the guy. Who was that? Is he on here? I was getting concerned about ya'll when you came out of that cut and that ship was coming, but you had the angle on 'em! |
Author: | AKA Freshwaterkilla [ Mon Feb 18, 2013 9:48 pm ] |
Post subject: | Re: Emergency- I need a large die |
Author: | take'emgator [ Mon Feb 18, 2013 9:49 pm ] |
Post subject: | Re: Emergency- I need a large die |
could be the truth but is it? hmmm you'll never know ![]() |
Author: | chaseh [ Mon Feb 18, 2013 9:56 pm ] |
Post subject: | Re: Emergency- I need a large die |
Handiman, no idea who he was. He seemed pretty nonchalant about the ship, however that was a sight new to me, so it may have rattled my nerves a little bit, but I was confident with the angle! |
Author: | eljefe [ Mon Feb 18, 2013 10:07 pm ] |
Post subject: | Re: Emergency- I need a large die |
yall gotta quite making fun od justin and his height.....he has got at least two inches on keith ![]() |
Author: | lucecr [ Mon Feb 18, 2013 10:18 pm ] |
Post subject: | Re: Emergency- I need a large die |
Still trying to figuire out why Coe was in the truck and Keith was on the ground holding up the prizes. I couldn't see anything in the back Keith had. Shouldn't they have switched? ![]() |
Author: | lucecr [ Mon Feb 18, 2013 10:23 pm ] |
Post subject: | Re: Emergency- I need a large die |
I got it!!! Coe as Big Enis, Keith as Little Enis and a young Terry as the Bandit. ![]() |
Author: | AKA Freshwaterkilla [ Mon Feb 18, 2013 10:25 pm ] |
Post subject: | Re: Emergency- I need a large die |
Author: | WestEndAngler [ Tue Feb 19, 2013 8:12 am ] |
Post subject: | Re: Emergency- I need a large die |
That truck was lifted & there was no step ladder to get in for Keith ![]() ![]() |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |