It is currently Fri Jul 04, 2025 4:37 pm




Reply to topic  [ 31 posts ] 
 Review- Beretta A300 outlander 
Author Message
MMT Sponsor
User avatar

Joined: Thu Sep 16, 2010 10:32 pm
Posts: 4036
Location: Gonzales La
Post Review- Beretta A300 outlander
Well I finally was able to pick up my new gun today and put a few rounds through it. Ill start off by saying Im in no way a shotgun expert, nor have I shot alot of different ones. Ive been shopping for a semi auto since last year when I started duck hunting, and never could really decide what I wanted because I couldnt find one that fit me perfect. They all came with shims to lengthen the pull, but my problem was just the opposite. This is the only gun that fit me exactly the way it should, it has shims that allow it to go down all the way to 13" length of pull. 13.5 ended up perfect for me. It has the action of the previous 391, and the previous gas system of the A400, so I wasnt concerned about it being a new gun with bugs that would have to be worked out down the road. It wasnt in the budget for me to spend 1600-1800 on a benelli or higher end beretta, and at 650$ the price was perfect. The fore end is very slim, and is very comfortable and looks good, although the butt stock seems a little on the cheap side. It doesnt shoot 3 1/2's, but that didnt matter to me because I have no use for them. It uses their 'mobile choke' system, which is kinda hard to find. I got an extended range improved choke from Team Camo, hes an authorized dealer for Angleport. I was concerned a little about it not being compatible with Beretta's kick off, but after shooting a few rounds through it today Im not even worried about it, it shoots like a dream without it. So unless later down the road I either 1.have a need for a gun that shoots 3 1/2's, or 2.develop some uncanny skill in shooting that this one can no longer satisfy me, this may be the last shotgun Ill have to buy. Ill see how it patterns this weekend and reply to this with the results. If you buy one, be prepared to spend some time cleaning it initially. Its filled with more packing grease than a bench vise from Harbor Freight. And big thanks to Crews for answering all the questions Ive had along the way, the dude definitely knows his shotguns!!

PROS:
price
adjustable shims for shorter stature people
proven gas system and action

CONS:
not 3 1/2" capable (didnt matter to me)
kick off not available (not really necessary)


Wed Oct 10, 2012 9:05 pm
Profile WWW
MMT Sponsor
User avatar

Joined: Thu Sep 16, 2010 10:32 pm
Posts: 4036
Location: Gonzales La
Post Re: Review- Beretta A300 outlander


Wed Oct 10, 2012 9:09 pm
Profile WWW
MMT Pro Member
User avatar

Joined: Sun Oct 07, 2012 10:36 pm
Posts: 86
Location: Tomball, Tx.
Post Re: Review- Beretta A300 outlander
Thanks. I've been looking at these.

Sent from my DROID RAZR using Tapatalk 2


Wed Oct 10, 2012 9:11 pm
Profile
MMT 1000 Club

Joined: Sun Dec 12, 2010 12:38 am
Posts: 3986
Location: Pville, La
Post Re: Review- Beretta A300 outlander
Ive got a 3901 and never even considered needing a kick off. I'm sure you will love it I know I love my beretta and if you run across another a300 let a brother know


Wed Oct 10, 2012 9:19 pm
Profile
MMT Elite Member
User avatar

Joined: Fri Oct 07, 2011 12:58 am
Posts: 5557
Post Re: Review- Beretta A300 outlander
Thanks for the review.. it seems like a real solid gun! This is most likely going to be my next shotgun as well.. Unless I decide to just stick with the A5 this season.. ive been debating on retiring it this season.. At only $650 it seems like an extremely good deal. Let us know how it patterns!

_________________
1850 Uncle J
Delta Performance level 4 GTR


Wed Oct 10, 2012 9:50 pm
Profile
MMT Sponsor
User avatar

Joined: Thu Oct 01, 2009 4:49 pm
Posts: 8536
Location: Bridge City, TX
Post Re: Review- Beretta A300 outlander
Let me know if you wanna try a different choke tube out & we'll get it dialed in for you.

_________________
1846 GTB & 35 GTR
Team Gator-Tail

Killer Kallz & ANGLE PORT dealer
(409) 720-8949


Wed Oct 10, 2012 10:01 pm
Profile WWW
MMT Pro Member

Joined: Sun Sep 16, 2012 10:45 pm
Posts: 85
Post Re: Review- Beretta A300 outlander
congrats on the purchase, but saying you don't need a 3 1/2 capable gun is like saying you don't need reverse on a mm. Sure you will be fine most of the time, but there will come a time when you'll wish you had it.


Wed Oct 10, 2012 11:07 pm
Profile
MMT Elite Member

Joined: Wed Jan 14, 2009 8:25 am
Posts: 6432
Location: the dark side of the moon
Post Re: Review- Beretta A300 outlander
Rod how many chokes came with it? Picking mine up in the a.m......finally. I may try to pick up some flush fit chokes for it. I'm used to a 24" gun, I don't want to make it any longer.

_________________
1850 & 36pd


Wed Oct 10, 2012 11:21 pm
Profile
MMT Sponsor
User avatar

Joined: Thu Sep 16, 2010 10:32 pm
Posts: 4036
Location: Gonzales La
Post Re: Review- Beretta A300 outlander
It comes with three flush fit


Wed Oct 10, 2012 11:30 pm
Profile WWW
MMT 1000 Club

Joined: Wed Jan 14, 2009 9:07 pm
Posts: 2260
Location: Lafayette
Post Re: Review- Beretta A300 outlander

_________________
24x60 Dual Prodrives


Thu Oct 11, 2012 12:23 pm
Profile
MMT Sponsor

Joined: Tue Jan 13, 2009 7:07 pm
Posts: 16608
Post Re: Review- Beretta A300 outlander
I went trough the spill on 3 1/2 inch shells you can kill them just as good with 3" I see no need to shoot them either. My next gun will be 3"

_________________
17x48 extreme stage 2 GTR
20X60 DUAL RIG BOWFISHING ADDITION
http://www.scalesandtailsbowfishing.com


Thu Oct 11, 2012 12:29 pm
Profile
MMT Sponsor
User avatar

Joined: Thu Oct 01, 2009 4:49 pm
Posts: 8536
Location: Bridge City, TX
Post Re: Review- Beretta A300 outlander
Same here, no 3-1/2s for me either

_________________
1846 GTB & 35 GTR
Team Gator-Tail

Killer Kallz & ANGLE PORT dealer
(409) 720-8949


Thu Oct 11, 2012 1:30 pm
Profile WWW
MMT 1000 Club

Joined: Thu Dec 29, 2011 10:46 pm
Posts: 2342
Location: Mandeville, LA
Post Re: Review- Beretta A300 outlander
I agree as well, no 3.5" needed. Of course, I also think the original A5 was a great gun in it's day, so I'm apparently an old bastard with no clue what "today's duck hunter's" really need, lol. :roll:


Thu Oct 11, 2012 2:01 pm
Profile
MMT Pro Member

Joined: Sun Sep 16, 2012 10:45 pm
Posts: 85
Post Re: Review- Beretta A300 outlander
I forgot that you guys are still wearing t-shirts at the end of your season. Try hunting late snow geese in February when every bit of the water around has 18-24 inches of ice and there is 2+ feet of snow covering everything. But then again you guys are the best of the best at everything so you could probably still do just fine with a .410!


Thu Oct 11, 2012 2:25 pm
Profile
MMT 1000 Club

Joined: Thu Dec 29, 2011 10:46 pm
Posts: 2342
Location: Mandeville, LA
Post Re: Review- Beretta A300 outlander


Thu Oct 11, 2012 2:27 pm
Profile
MMT Sponsor
User avatar

Joined: Thu Oct 01, 2009 4:49 pm
Posts: 8536
Location: Bridge City, TX
Post Re: Review- Beretta A300 outlander
Try hunting the Gulf coast in late season, after all the birds have been sky busted at by guys up north shooting 3-1/2" all season. :roll:
I do just fine with my 2-3/4 & 3" shells, shooting them over the dekes, like you should do, not trying to knock em down from the Ozone layer.

_________________
1846 GTB & 35 GTR
Team Gator-Tail

Killer Kallz & ANGLE PORT dealer
(409) 720-8949


Thu Oct 11, 2012 2:45 pm
Profile WWW
MMT 1000 Club
User avatar

Joined: Tue Jan 13, 2009 9:46 pm
Posts: 4596
Location: East TEXAN Proud
Post Re: Review- Beretta A300 outlander
Nice gun at a resonable price it looks to be ...... Does the Black finish appear to be durable ? Lots of the Black finish types I have seen seem to rust easily ...

3" shells is all I have ever needed ..... 'course I was bless with a BigOleDong tho ......

_________________
Git a Gator-Tail or ride in mines wake ...... MtrFact !!!!!
'05 Model .... Still Number One on the Water !!!!


Thu Oct 11, 2012 3:41 pm
Profile
MMT Pro Member

Joined: Sun Sep 16, 2012 10:45 pm
Posts: 85
Post Re: Review- Beretta A300 outlander


Thu Oct 11, 2012 3:45 pm
Profile
MMT Sponsor
User avatar

Joined: Thu Sep 16, 2010 10:32 pm
Posts: 4036
Location: Gonzales La
Post Re: Review- Beretta A300 outlander
Wm please take your bickering some where other than my review.


Thu Oct 11, 2012 3:51 pm
Profile WWW
MMT Elite Member

Joined: Wed Jan 14, 2009 8:25 am
Posts: 6432
Location: the dark side of the moon
Post Re: Review- Beretta A300 outlander
I've been hunting ducks for 27yrs and never needed a 3 1/2" shell.

_________________
1850 & 36pd


Thu Oct 11, 2012 4:34 pm
Profile
MMT Elite Member
User avatar

Joined: Tue Sep 13, 2011 11:46 am
Posts: 5216
Location: Across the Bayou, LA
Post Re: Review- Beretta A300 outlander

_________________
35 GTR - 1754 Extreme



Thu Oct 11, 2012 5:44 pm
Profile
MMT Elite Member
User avatar

Joined: Tue Jan 13, 2009 6:08 pm
Posts: 5282
Location: Meraux,La.
Post Re: Review- Beretta A300 outlander
Glad you like the new firearm Rod. I was looking into them and waiting for their release. Don't worry about the 3.5" BS I've killed everything under the sun with 3" rounds and that does include quite a few snows both down here and up north.

I own several 3.5" guns and never shoot long shells out of them,it's just not necessary for me.


Thu Oct 11, 2012 6:20 pm
Profile
MMT Elite Member

Joined: Wed Jan 14, 2009 8:25 am
Posts: 6432
Location: the dark side of the moon
Post Re: Review- Beretta A300 outlander
Just got mine clean. I love it. It'll be dipped soon I hope. They fudged a little on the barrel finish so keep an eye on it.

_________________
1850 & 36pd


Thu Oct 11, 2012 6:24 pm
Profile
MMT Elite Member
User avatar

Joined: Fri Oct 07, 2011 12:58 am
Posts: 5557
Post Re: Review- Beretta A300 outlander
Where are yall getting yalls from? Are they in stores yet? I havent had time to check gander or academy here yet..

_________________
1850 Uncle J
Delta Performance level 4 GTR


Thu Oct 11, 2012 6:26 pm
Profile
MMT Elite Member

Joined: Wed Jan 14, 2009 8:25 am
Posts: 6432
Location: the dark side of the moon
Post Re: Review- Beretta A300 outlander
Cabelas. Rod turned me on to the gun I bought. I haven't seen them anywhere for sale. Call your local cabelas and ask for the special orders guy. Maybe he'll be nice and check if another store has one if he doesn't. That's how I scored mine.

_________________
1850 & 36pd


Thu Oct 11, 2012 6:59 pm
Profile
MMT Elite Member
User avatar

Joined: Fri Oct 07, 2011 12:58 am
Posts: 5557
Post Re: Review- Beretta A300 outlander
I think the closest cabelas around here is 3 or so hours away.. can they be shipped to your door?

_________________
1850 Uncle J
Delta Performance level 4 GTR


Thu Oct 11, 2012 8:55 pm
Profile
MMT 1000 Club

Joined: Sun Jan 01, 2012 9:25 am
Posts: 1685
Post Re: Review- Beretta A300 outlander


Thu Oct 11, 2012 8:58 pm
Profile
MMT Elite Member
User avatar

Joined: Fri Oct 07, 2011 12:58 am
Posts: 5557
Post Re: Review- Beretta A300 outlander
OK.. Thanks for the help guys!

_________________
1850 Uncle J
Delta Performance level 4 GTR


Thu Oct 11, 2012 8:58 pm
Profile
MMT 1000 Club

Joined: Wed Jan 14, 2009 9:07 pm
Posts: 2260
Location: Lafayette
Post Re: Review- Beretta A300 outlander
They're really not even supposed to be in Cabelas stores yet. They got them earlier than they should have.

_________________
24x60 Dual Prodrives


Thu Oct 11, 2012 8:59 pm
Profile
MMT Elite Member
User avatar

Joined: Fri Oct 07, 2011 12:58 am
Posts: 5557
Post Re: Review- Beretta A300 outlander
When are they supposed to be released to stores?

_________________
1850 Uncle J
Delta Performance level 4 GTR


Thu Oct 11, 2012 9:04 pm
Profile
MMT Super Elite Member

Joined: Fri Dec 18, 2009 8:10 pm
Posts: 16915
Location: Rowlett, TX
Post Re: Review- Beretta A300 outlander
Ft worth has them, or so I heard. Mckinney doesn't.


Thu Oct 11, 2012 9:08 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 31 posts ] 

Who is online

Users browsing this forum: No registered users and 68 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: