MudmotorTalk.com
http://mudmotortalk.com/mmt_v2/

Bowfishing broadheads
http://mudmotortalk.com/mmt_v2/viewtopic.php?f=8&t=3731
Page 1 of 1

Author:  SwampSnyper [ Thu Aug 06, 2009 8:04 am ]
Post subject:  Bowfishing broadheads

What tips do you use. I have the ones that came with the ams set up and we lost a couple fish dew to spinning and releasing the barb.

These are the ones I have. Don't care for them.
http://www.yeoldearcheryshoppe.com/caju ... -2252.html

Author:  SwampSnyper [ Thu Aug 06, 2009 8:40 am ]
Post subject:  Re: Bowfishing broadheads

Looks like the ones we used with marshmasters. Do you unscrew the tip a few turns and the barb flips?

Author:  muddiejeep [ Thu Aug 06, 2009 8:42 am ]
Post subject:  Re: Bowfishing broadheads

X2 on kooks suggestion

yeah, unscrew a few turns to flip barb.

Author:  blaze [ Thu Aug 06, 2009 4:50 pm ]
Post subject:  Re: Bowfishing broadheads

Don't forget to spray some WD-40 on them suckers after you fish because you will catch hell next time you go out.

Author:  shallow water master [ Thu Aug 06, 2009 7:00 pm ]
Post subject:  Re: Bowfishing broadheads

Muzzy Carp Point thats the best ones to use and defiantly do what blaze said cuz it the truth lololololol

Author:  blaze [ Thu Aug 06, 2009 8:35 pm ]
Post subject:  Re: Bowfishing broadheads

When you shoot the first fish of the night and takes about 10 mins to get the fish off it really pisses you off. Not that I have done it or anything. :lol:

Author:  SmokeEater829 [ Thu Aug 06, 2009 9:00 pm ]
Post subject:  Re: Bowfishing broadheads

Or, instead of spraying them with WD-40, you can do like I did. I have a piece of 2.5 inch PVC hose clamped to my poling platform. On the bottom, I glued a cap on. On the top is a screw in plug. I put about an inch or an inch and a half of motor oil in the pipe. I untie my arrows after each trip and place them tip down in the oil. This keeps them from ever getting locked up form rust. It also gives me storage for extra arrows. I think I have 6 arrows in that tube.

You can kinda see the PVC pipe in my avatar.

And I only shoot the Muzzy Carp points.

Author:  shallow water master [ Thu Aug 06, 2009 11:20 pm ]
Post subject:  Re: Bowfishing broadheads

yep smokes idea was a good one it works grate

Author:  BayouStateHunter [ Sat Aug 08, 2009 10:05 pm ]
Post subject:  Re: Bowfishing broadheads

X 53 on Kook's advice. Go with the Muzzys and buy some extra tips. I keep a small jar full of gun oil or motor oil and keep the spares in the jar. I also unscrew the tips after each trip keep them in the jar. 1st timers like to loose the tips so have some extras on hand.

Author:  jpc014 [ Mon Aug 10, 2009 7:57 am ]
Post subject:  Re: Bowfishing broadheads

i use the sting-ray ones, i think they are made by muzzy not to sure.

Author:  shallow water master [ Mon Aug 10, 2009 5:43 pm ]
Post subject:  Re: Bowfishing broadheads


Author:  jl [ Tue Aug 11, 2009 7:20 am ]
Post subject:  Re: Bowfishing broadheads


Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/