steel? whats steel? i use lead
| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Patterning SBE2!!!! http://mudmotortalk.com/mmt_v2/viewtopic.php?f=8&t=43512 |
Page 1 of 1 |
| Author: | MudSlinger88 [ Sun Jul 28, 2013 9:10 am ] |
| Post subject: | Patterning SBE2!!!! |
What choke/shell combo has patterned best for yals sbe2 ?? Sent from my iPhone using Tapatalk 2 |
|
| Author: | forever draggin [ Sun Jul 28, 2013 9:15 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
I haven't tested a lot of chokes but I use a kicks mod and its deadly |
|
| Author: | forever draggin [ Sun Jul 28, 2013 9:15 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
I like Remington sureshot |
|
| Author: | MudSlinger88 [ Sun Jul 28, 2013 9:19 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
Those sure shots are cheap too huh?? I'm trying to get away from black cloud to me they are just an overpriced shell that does the same damn thing a cheaper shell does than they make a choke "SPECIFICALLY" for that expensive shit so you spend more money on that junk Sent from my iPhone using Tapatalk 2 |
|
| Author: | MudSlinger88 [ Sun Jul 28, 2013 9:21 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
I have a trulock mod and shot some fasteel out of it and it did alright. But I'm sure there is a better combo Sent from my iPhone using Tapatalk 2 |
|
| Author: | Quackhead62 [ Sun Jul 28, 2013 9:23 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
I agree with forever draggin the kicks mod is bad ass |
|
| Author: | forever draggin [ Sun Jul 28, 2013 9:23 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
I think it was 14 a box last yr |
|
| Author: | forever draggin [ Sun Jul 28, 2013 9:25 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
I tried Kent's a few times and the gun seemed to like it, but they too dirty, always getting powder n my eyes, and they aren't waterproof so ill buy em if that's all they got but I try to grab something else |
|
| Author: | Quackhead62 [ Sun Jul 28, 2013 9:33 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
I like to use Winchester drylock 1 3/8 oz #2 |
|
| Author: | barnes_53 [ Sun Jul 28, 2013 9:37 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
Kicks extended range full. I leave it in all season and it has proven to be very consistent. |
|
| Author: | Kmoppert [ Sun Jul 28, 2013 9:39 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
| Author: | odass [ Sun Jul 28, 2013 9:41 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
another vote for kicks, got a mod, and a long range love them both |
|
| Author: | deltaduckmaster [ Sun Jul 28, 2013 9:41 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
Briley goose getter IM. Remington sportsman Steele. 1 3/8 oz. # 2 out of my sbe2 around $50 for the choke |
|
| Author: | MudSlinger88 [ Sun Jul 28, 2013 9:47 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
| Author: | dog walker [ Sun Jul 28, 2013 9:52 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
I put a new barrel(sbe 2) on my old sbe this year. So far my factory mod is out performing everything with 75-80% patterns at 40 yards. |
|
| Author: | JIMMY W [ Sun Jul 28, 2013 10:40 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
I was just going to say to try some of the factory chokes next time you go to pattern a gun!You will be fooled how good some shoot! |
|
| Author: | MudSlinger88 [ Sun Jul 28, 2013 10:43 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
I have herd that the sbe2 chokes are some of the best might have to try it out as soon as I got the gun I got the trulock so never even used em Sent from my iPhone using Tapatalk 2 |
|
| Author: | dog walker [ Sun Jul 28, 2013 10:57 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
I tried with several carlsons and brileys. Both brands work great in all the other guns I own but for that barrel I haven't found a load/choke combo that will beat it. I've tried tighter constrictions,more open construction, heavier payloads,lighter payloads, faster and slower but that factory mod throws a damn good consistent pattern. The only thing I don't like about it is its a flush choke. Atleast with extended chokes if it swells in the threads you can grab it with a small pipe wrench or pliers to get it out. |
|
| Author: | p_foster [ Sun Jul 28, 2013 11:03 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
On the same train with kicks. I've been shooting hevi metal with it for the past few years and it's done good so far. |
|
| Author: | MudSlinger88 [ Sun Jul 28, 2013 11:16 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
To me the heck metal is just like the black cloud over priced and have to buy a choke specifically for it I don't believe in all that but than again never tried it so I won't knock it just think its a little on the pricey side to do the same thing a Winchester or Remington will do Sent from my iPhone using Tapatalk 2 |
|
| Author: | forever draggin [ Sun Jul 28, 2013 11:22 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
I shot heavy metal with a kicks modified, had. Lot of cripples |
|
| Author: | Okie Ghost [ Sun Jul 28, 2013 11:23 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
I spent a ton of time and money testing this out a few years back. I tried kicks, Indian creek, Carlson, Briley, Angle Port, Wad Wizard and Patternmaster chokes. I ended up keeping the Paternmaster and sold all the others. I like shooting one shell for geese and ducks. Rogers had a great sale on Remington nitro steel 3.5" BB 1 9/16oz @1300 fps, so I bought several cases. That combo is flat out deadly! Have killed geese and ducks out to 75+ yards with it. Not that it's a habit, but some times you get those sailers. I can reach out and crush them no problem. I won't shoot anything else. It also patterns my lead 5's great for Sodak pheasants, and have killed 3 turkeys with it. Each at 20+ yards. |
|
| Author: | Bigrich [ Sun Jul 28, 2013 11:26 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
Patternmaster tubes all the way |
|
| Author: | MudSlinger88 [ Sun Jul 28, 2013 11:28 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
That's gotta blow up the ducks in decoy range though Sent from my iPhone using Tapatalk 2 |
|
| Author: | MudSlinger88 [ Sun Jul 28, 2013 11:29 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
What shell is good with the patternmaster Sent from my iPhone using Tapatalk 2 |
|
| Author: | p_foster [ Sun Jul 28, 2013 11:32 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
I'm gonna try fasteel this season because the price of hevi metal went up. How many of y'all like it? |
|
| Author: | MudSlinger88 [ Sun Jul 28, 2013 11:36 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
I loved fasteel out of my trulock mod but is a little dirty and don't get them wet Sent from my iPhone using Tapatalk 2 |
|
| Author: | Bigrich [ Sun Jul 28, 2013 11:44 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
Fast steel are good shells and I've had luck out of blindside |
|
| Author: | Okie Ghost [ Sun Jul 28, 2013 11:47 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
| Author: | dog walker [ Sun Jul 28, 2013 11:53 am ] |
| Post subject: | Re: Patterning SBE2!!!! |
One thing to keep in mind with pattern masters, they don't perform as well with faster loads. Anything in the 1500 fps and higher range. Now I have no first hand knowledge because I've never owned a pattern master but that's what I've been told. Also if you check their website I believe it will state this. |
|
| Author: | Okie Ghost [ Sun Jul 28, 2013 12:18 pm ] |
| Post subject: | Re: Patterning SBE2!!!! |
I patterned the red box federals at 1500 and they were fine. I wouldn't go any faster tho. I think they discounted those shells and now federal only does blue box speed shok or something like that. |
|
| Author: | gator22 [ Sun Jul 28, 2013 2:32 pm ] |
| Post subject: | Re: Patterning SBE2!!!! |
steel? whats steel? i use lead
|
|
| Author: | SwampSlut [ Sun Jul 28, 2013 5:24 pm ] |
| Post subject: | Re: Patterning SBE2!!!! |
If price is your only concern with black cloud either shoot better or Work overtime to buy black cloud |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|