| MudmotorTalk.com http://mudmotortalk.com/mmt_v2/ |
|
| Painting a gun? http://mudmotortalk.com/mmt_v2/viewtopic.php?f=8&t=7395 |
Page 1 of 1 |
| Author: | cmiller73 [ Wed Jan 27, 2010 3:50 pm ] |
| Post subject: | Painting a gun? |
I got Rem M887 Nitro Mag. The black cause the store didn't have the camo and I didn't feel like waiting on getting a gun. Is it possible to have the gun painted? I know it may chip and such, but what paints would work best? The gun is completely synthetic, so I wouldn't see the issue with paint on the barrel. Any thoughts? |
|
| Author: | EasTexDux88 [ Wed Jan 27, 2010 3:57 pm ] |
| Post subject: | Re: Painting a gun? |
not sure how the paint would adhere to the coating. my guess would be a good primer first then paint of choice. i know krylon makes a paint for plastic and stuff. you may be able to use that for a base. just try a lil on a non visible part first. let us know how it turns out! 
|
|
| Author: | WestEndAngler [ Wed Jan 27, 2010 4:05 pm ] |
| Post subject: | Re: Painting a gun? |
My buddy painted his brand new gun... took sand paper to his brand new barrel and rubber coated it & painted it... came out good but yah I'm just going to get mine dipped... |
|
| Author: | cmiller73 [ Wed Jan 27, 2010 4:08 pm ] |
| Post subject: | Re: Painting a gun? |
Doing some searching on the net and see what I can come up with. Found this guys site http://yellerdawg.com/howto/gunpaint/gunpaint.html but he was painting wood and steel. It looks pretty good. |
|
| Author: | cb5331 [ Wed Jan 27, 2010 4:09 pm ] |
| Post subject: | Re: Painting a gun? |
If you have a gander mtn close by, they do the custom camo jobs. The good ones like new guns come with. If I remember correctly it was not too expensive. Prices are on their website. |
|
| Author: | cmiller73 [ Wed Jan 27, 2010 4:12 pm ] |
| Post subject: | Re: Painting a gun? |
Seems this stuff works great. http://www.krylon.com/products/camoufla ... echnology/ Wonder what bore cleaners and solvents would do to the paint. This one http://www.brownells.com/.aspx/pid=1117 ... DE_reg__II says it's OK with solvents and cleaners. |
|
| Author: | Pintail58 [ Wed Jan 27, 2010 4:30 pm ] |
| Post subject: | Re: Painting a gun? |
http://www.duckhuntingchat.com/forum/vi ... 13&t=36000 This ole boy did a damn good job on this one. |
|
| Author: | EasTexDux88 [ Wed Jan 27, 2010 4:36 pm ] |
| Post subject: | Re: Painting a gun? |
| Author: | cb5331 [ Wed Jan 27, 2010 4:51 pm ] |
| Post subject: | Re: Painting a gun? |
| Author: | dpd [ Wed Jan 27, 2010 9:33 pm ] |
| Post subject: | Re: Painting a gun? |
DAMMIT BOYS! Now I am going to have to paint the 870 Supermag. I have been wanting to do it, but the moving parts were suspect. Those links answered all my questions. All I need is the primer and a good clearcoat. This is going to be fun. |
|
| Author: | Pintail58 [ Thu Jan 28, 2010 7:10 am ] |
| Post subject: | Re: Painting a gun? |
It's nice how he takes you step by step through it also. |
|
| Author: | cmiller73 [ Thu Jan 28, 2010 7:54 am ] |
| Post subject: | Re: Painting a gun? |
Seems my topic got a few others interested. Thanks for all the links. There's alot of good advice out there. One more weekend of hunting and then the gun comes down. I think I gonna wait till the weather warms up a bit. |
|
| Author: | MaXXis85 [ Fri Jan 29, 2010 10:06 am ] |
| Post subject: | Re: Painting a gun? |
Im gonna do this to my 870 Express now that the finish is all off the wood and I got a new Shootgun anyways. Good project to kill time on a slow day. |
|
| Author: | dpd [ Fri Jan 29, 2010 11:08 am ] |
| Post subject: | Re: Painting a gun? |
I did a few searches to see more about this. If you follow this guys instructions and use the Krylon spray, primer and a clear coat, this paint job will take a beating. I can attest to the Krylon Camo as I used it on my boat for the stencil work and it does not flake or peel and holds up very well. I am going to do my 870 supermag as well. |
|
| Author: | dpd [ Thu Feb 04, 2010 6:30 pm ] |
| Post subject: | Re: Painting a gun? |
I went ahead and painted my 870 supermag. I couldn't resist.I followed the directions that Pintail58 posted up and I think it came out pretty clean. When I got to the part of brushing in more reeds I just left it alone as I am not that artistic. The entire stock was black synthetic and the barrel was matte black. I elected not to paint the trigger and trigger housing as there are some moving parts I decided to just leave as is. The slide tube I left as is because I feel like it would have inhibited movement of the pump and the paint would have worn off anyway. I looked as some manufacturer's pics and most leave the slide tube unpainted, some leave the trigger and housing unpainted as well. All it costed me was the clear coat, and the auto primer. I already had all the other Krylon colors. Total cost was probbaly $8. It took me two evenings to do it as I had to let the coats dry in between painting. Probably in all maybe two hours of cleaning, prepping, taping and painting. I don't know how it will hold up to hunting abuse, but for the most part the exterior is now weatherized. The stencil pattern was just a handful of Johnson grass. If I can do it, anybody can. |
|
| Author: | caddobrook [ Thu Feb 04, 2010 6:43 pm ] |
| Post subject: | Re: Painting a gun? |
Great Job! |
|
| Author: | cmiller73 [ Thu Feb 04, 2010 6:46 pm ] |
| Post subject: | Re: Painting a gun? |
That is all I want to do too. Break up the black solid of the gun. I think you did a great job. I'll be doing mine once the heat and dryness comes back here. My son wants his Mosberg Mav done also. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|