Author |
Message |
schriever retriever
MMT Member
Joined: Wed Nov 11, 2009 12:49 pm Posts: 9 Location: Schriever La.
|
Torque specs/valve clearance specs
Can someone tell me right off hand the cylinder head and rocker arm bolts torqe specs for a 36pd also valve clearance specs? Thankx.
|
Sun Oct 24, 2010 8:57 pm |
|
|
deadbird8
MMT 1000 Club
Joined: Wed Feb 04, 2009 7:50 pm Posts: 3833 Location: Old East Dallas, Texas
|
Re: Torque specs/valve clearance specs
_________________ Excel 1851F4 w/ MB35HD+R CDI with a little bit of this and little bit of that
|
Mon Oct 25, 2010 5:41 am |
|
|
quackconsumer
MMT Elite Member
Joined: Wed Jan 14, 2009 7:54 pm Posts: 5582
|
Re: Torque specs/valve clearance specs
Gary, thanks. I'm gonna put da bookmark on dis.
|
Mon Oct 25, 2010 9:02 am |
|
|
deadbird8
MMT 1000 Club
Joined: Wed Feb 04, 2009 7:50 pm Posts: 3833 Location: Old East Dallas, Texas
|
Re: Torque specs/valve clearance specs
_________________ Excel 1851F4 w/ MB35HD+R CDI with a little bit of this and little bit of that
|
Mon Oct 25, 2010 4:21 pm |
|
|
dguidry
MMT Super Elite Member
Joined: Tue Jun 29, 2010 1:20 pm Posts: 11166 Location: Cecilia, LA
|
Re: Torque specs/valve clearance specs
Deadbird8: link to those values? Does anyone have a link to a detailed manual with these specs and instructions for installing heads, porting and polishing intakes, decking heads as these procedures apply to vanguard engines? I can find generalized manuals but none have the depth and breath of information for which I am looking. Any help...links, publishers, online retainers, titles would be very helpful. Thanks in advance.
_________________ Formerly:1648 Homemade Cypress Crawfish Skiff GTR23 Performance Cam and Heads; 17x46 Gator Tail with 35GTR and Hoyt's cam;s Currently: 17x48 Gator Tail with XD40 EFI. “Wisdom is not just expertise. It is knowing how much of various areas of expertise you need to know in order to make the decisions that the world needs and that you want to do,” Columbia University President Lee Bollinger.
|
Mon Oct 25, 2010 6:34 pm |
|
|
dguidry
MMT Super Elite Member
Joined: Tue Jun 29, 2010 1:20 pm Posts: 11166 Location: Cecilia, LA
|
Re: Torque specs/valve clearance specs
Bump.... I need a manual. Help. Thanks
_________________ Formerly:1648 Homemade Cypress Crawfish Skiff GTR23 Performance Cam and Heads; 17x46 Gator Tail with 35GTR and Hoyt's cam;s Currently: 17x48 Gator Tail with XD40 EFI. “Wisdom is not just expertise. It is knowing how much of various areas of expertise you need to know in order to make the decisions that the world needs and that you want to do,” Columbia University President Lee Bollinger.
|
Tue Oct 26, 2010 8:06 am |
|
|
MaXXis85
MMT Elite Member
Joined: Wed Jan 14, 2009 7:23 am Posts: 6233 Location: Tarkington, TX
|
Re: Torque specs/valve clearance specs
_________________ Bayou Surface Drive 337-351-0362 Tarkington, TX 77327
|
Tue Oct 26, 2010 8:18 am |
|
|
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
Re: Torque specs/valve clearance specs
x2 Briggs may even have a service manual in pdf format on their website. Kohler does. If not, order one... There's not gonna be any info on modifying the engine though, so nothing about porting then intake.
|
Tue Oct 26, 2010 8:41 am |
|
|
MaXXis85
MMT Elite Member
Joined: Wed Jan 14, 2009 7:23 am Posts: 6233 Location: Tarkington, TX
|
Re: Torque specs/valve clearance specs
_________________ Bayou Surface Drive 337-351-0362 Tarkington, TX 77327
|
Tue Oct 26, 2010 9:22 am |
|
|
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
Re: Torque specs/valve clearance specs
If anyone knows it would be DB8... I've looked for some stuff on the briggs site before, like you said, its tough.
On another note, the kohler site is very easy to navigate. For those of you running kohlers, check it out. They have all the parts lists, owners manuals, and service manuals online...
|
Tue Oct 26, 2010 1:05 pm |
|
|
deadbird8
MMT 1000 Club
Joined: Wed Feb 04, 2009 7:50 pm Posts: 3833 Location: Old East Dallas, Texas
|
Re: Torque specs/valve clearance specs
Repair manual is orderable from briggs or others, I got mine from Jacks Small Engine. - it has a Briggs part number. I have not seen one on-line. Briggs doesn't have 'manuals' for modifying the engines (decking heads etc...)
If you are changing the heads then the manual is not gonna help you much except for torque sequence for the heads (which only shows 5 bolts instead of 6 in the diagram anyway). It doesn't go into step by step detail about pulling off the cowling etc... You would would need a 10mm, 12mm, 13mm, 14mm, Torx T40, and torque wrench. Take off the fan cage etc.., cowling, intake, valve covers,exhaust, then air baffle shields, and finally the 6 bolts for the head.
Porting the stock intake- I did a long post with pictures on the site that can't be named that gives a step by step. But they block that site here or I would post the link.
_________________ Excel 1851F4 w/ MB35HD+R CDI with a little bit of this and little bit of that
|
Fri Oct 29, 2010 1:59 pm |
|
|
SP
MMT 1000 Club
Joined: Thu Nov 19, 2009 1:46 pm Posts: 1210
|
Re: Torque specs/valve clearance specs
Marked!
|
Thu May 31, 2012 12:36 pm |
|
|
MONDAGO
MMT Pro Member
Joined: Tue Nov 30, 2010 8:44 pm Posts: 111 Location: California
|
Re: Torque specs/valve clearance specs
Any one know the torque spec for the clutch bolt? (At least that's what I think it's called....the bolt that goes into the clutch and hold everything to the shaft) Thanks.
|
Fri Jul 12, 2013 7:31 am |
|
|
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
Re: Torque specs/valve clearance specs
Call peck and verify, but I want to say its around 70 ft lbs.
|
Fri Jul 12, 2013 7:47 am |
|
|
MONDAGO
MMT Pro Member
Joined: Tue Nov 30, 2010 8:44 pm Posts: 111 Location: California
|
Re: Torque specs/valve clearance specs
|
Fri Jul 12, 2013 8:17 am |
|
|
Will
MMT Elite Member
Joined: Fri Jul 08, 2011 1:54 pm Posts: 8133
|
Re: Torque specs/valve clearance specs
Think its more than that. Impact that sucker
_________________ Before the internet, the majority of the village idiots stayed in their villages.
|
Fri Jul 12, 2013 8:50 am |
|
|
MONDAGO
MMT Pro Member
Joined: Tue Nov 30, 2010 8:44 pm Posts: 111 Location: California
|
Re: Torque specs/valve clearance specs
Sent an email to Micah at MB and he said 55 FT Lbs.
|
Mon Jul 15, 2013 2:11 pm |
|
|
Will
MMT Elite Member
Joined: Fri Jul 08, 2011 1:54 pm Posts: 8133
|
Re: Torque specs/valve clearance specs
I thought this was still about a PD!?
_________________ Before the internet, the majority of the village idiots stayed in their villages.
|
Mon Jul 15, 2013 2:21 pm |
|
|
hardie creel
MMT Pro Member
Joined: Sun Oct 04, 2015 7:56 pm Posts: 52
|
Re: Torque specs/valve clearance specs
|
Sun Nov 08, 2015 3:15 pm |
|
|
jc
MMT 1000 Club
Joined: Sun Oct 24, 2010 7:19 pm Posts: 1103
|
Re: Torque specs/valve clearance specs
Hardie he posted that 5 years ago.
|
Sun Nov 08, 2015 5:40 pm |
|
|
hardie creel
MMT Pro Member
Joined: Sun Oct 04, 2015 7:56 pm Posts: 52
|
Re: Torque specs/valve clearance specs
|
Sun Nov 08, 2015 7:52 pm |
|
|
BERNIE255
MMT 1000 Club
Joined: Sun Jun 16, 2013 4:43 pm Posts: 1381 Location: Avoyelles Parish/ Marksville LA
|
Re: Torque specs/valve clearance specs
Can somekne tell your how to fuckin type and make sentences?
Sent from my iPhone using Tapatalk
|
Sun Nov 08, 2015 8:24 pm |
|
|
DmaxHunter
MMT 1000 Club
Joined: Wed Jan 18, 2012 7:21 pm Posts: 2207 Location: North Alabama
|
Re: Torque specs/valve clearance specs
_________________ 2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD
2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD
|
Mon Nov 09, 2015 2:58 am |
|
|
Migrator
MMT 1000 Club
Joined: Sun Apr 17, 2011 2:29 pm Posts: 3227 Location: Black River, MS
|
Re: Torque specs/valve clearance specs
Tough crowd up in this bitch! Hahaha
Sent from my iPhone using Tapatalk
_________________ WC CUSTOM 20X54 Battleship w/ Gator Glide Pushed & Pulled hard by an HDR!
Don't be scared...Hit It and Hold It!!!
|
Sun Nov 29, 2015 6:43 pm |
|
|
BlueShamu
MMT Elite Member
Joined: Mon Feb 06, 2012 6:13 pm Posts: 5605 Location: D'town, LA
|
Re: Torque specs/valve clearance specs
|
Mon Nov 30, 2015 1:43 pm |
|
|
|