Author |
Message |
MOTimberHunter
MMT Member
Joined: Mon Apr 25, 2011 9:25 am Posts: 28 Location: Missouri
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) 1652 Lowe Roughneck With 35 HD Mud Buddy
I have a 1652 Roughneck I just picked up a 35 Mud Buddy Sport (used but runs GREAT!) So far I've had it out once and Im very happy with the way it preformed I havent GPSed it yet, but I will and I will post the results. I didnt think it would do that great it the mud pushing that boat, I was wrong I ran the boat in a small section of muddy bank and it didnt blink just ran right through it. I stopped in the shallow (4inches of water with real muddy bottom) and I wanted to test its ability to get out from dead stop, once again I was suprised and it got out good. Did all this with 2 people gas tank and battery. Will order new prop, and then test it with a bigger load (hunting load) and post those results as well. Overall extremely happy with it thus far cant wait to test it out more especially with new prop.
_________________ 1652 Roughneck powered by Mud Buddy 35 HD Sport Mercury Trim with Custom Stainless Exhaust
|
Mon Oct 10, 2011 11:10 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
MOTimberHunter
MMT Member
Joined: Mon Apr 25, 2011 9:25 am Posts: 28 Location: Missouri
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: 1652 Lowe Roughneck With 35 HD Mud Buddy
Latest ride 3 people (around 625lbs) on big farm pond/lake
Open water speeds still good (sorry havent gps it yet, but will ASAP)
The only mud on the pond was in a real narrow cove but it was very thick and tough. There wasnt much room to mud and turn around in the cove so I got stuck a couple times because I ran out of room and beached the boat on the bank. However once I got a pattern I didnt get stuck. The mudding ability is better than what I thought it would be in that boat seems how its short wide mod v and ribs all the way down. In open marsh I expect it to do very well because you can keep your momentum going, instead of hitting hard mud and having to make a sharp turn in/through it killing momentum fast.
Will post more updates as I ride more.
Thanks
_________________ 1652 Roughneck powered by Mud Buddy 35 HD Sport Mercury Trim with Custom Stainless Exhaust
|
Tue Oct 11, 2011 9:06 pm |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
MOTimberHunter
MMT Member
Joined: Mon Apr 25, 2011 9:25 am Posts: 28 Location: Missouri
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: 1652 Lowe Roughneck With 35 HD Mud Buddy
Took four people (225,200,225,180 = 830) to the river to scout some holes for duck season deep water speeds were still good just took a couple more seconds to get on plane. I tried to gps it with my cell phone but the program I downloaded didnt work I apologize. I'm just going to have to buy a hand held gps, I'm sure they are more accurate anyway. Went up a small creek and did some shallow water cruising did good still in what mud we found. Very stumpy creek motor took hitting the stumps very good hit two hard at full throttle and several more anywhere from 1/2 to 3/4 throttle.
Anybody know of some good, cheap, and accurate hand held GPS? Or a good cell app that is accurate?
Thanks I hope this helps some people looking to shop and purchase a mud motor. So far I'm very happy with my Mud Buddy.
_________________ 1652 Roughneck powered by Mud Buddy 35 HD Sport Mercury Trim with Custom Stainless Exhaust
|
Wed Oct 19, 2011 1:22 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
backwater86
MMT Pro Member
Joined: Fri Dec 10, 2010 5:10 pm Posts: 108 Location: Mechanical Tech
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: 1652 Lowe Roughneck With 35 HD Mud Buddy
Garmin Etrex around $100. on E-bay as low as $50. used
|
Thu Oct 20, 2011 9:37 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
Glades Ranger
MMT 1000 Club
Joined: Mon Sep 19, 2011 6:32 pm Posts: 1490 Location: south Florida
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: 1652 Lowe Roughneck With 35 HD Mud Buddy
That is the same GPS I was going to plug. I still have my Garmin Model 12, something of an "antique" by now, simple but effective. I teach middle school, and many of my students have GPS and compass features on their phone. When I can afford one, I will get one as well. MOTimberHunter, those Lowe jons are solid- my two good friends have been running their Lowe 1648 rivetted models with longtail motors since 1989, and they are holding up quite well. Neither their hulls nor your all-welded Roughneck 1652 are an ideal match with a mud motor, either longtail or surface drive, but they are solid. Another friend ran a 1980 Sea Nymph .072 gauge 1652 hull with longtail motors for years with great performance, and the last three years has run a 35 MB shorty on it very effectively. Since we don't have to vault beaver dams, skip over cypress knees or submerged stumps as in other areas, we get by with lighter skins.
_________________ Sailing in the sawgrass /1648 grizzly and Swomp 26.5 EFI
|
Thu Oct 20, 2011 12:26 pm |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
MOTimberHunter
MMT Member
Joined: Mon Apr 25, 2011 9:25 am Posts: 28 Location: Missouri
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: 1652 Lowe Roughneck With 35 HD Mud Buddy
Thanks backwater and Glades
Ya the old Roughneck is a solid boat for sure had it for about 8 years now and I've put it through a lot and it still looks great the bottom has a few scratches no real dents tho. The latest test of the boat was when I was mudding on the river next to the bank and I turned around to find my buddy, long story short I came out of the mud hit a tree stump went air born I went flying out of the boat and got lucky I only hit one stump when I landed. Boat didnt even dent just a wood mark scratch, and the motor fired right up. I'm looking forward to more mudding but hopefully no more fubars like that. lol
_________________ 1652 Roughneck powered by Mud Buddy 35 HD Sport Mercury Trim with Custom Stainless Exhaust
|
Fri Oct 21, 2011 3:48 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
MOTimberHunter
MMT Member
Joined: Mon Apr 25, 2011 9:25 am Posts: 28 Location: Missouri
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: 1652 Lowe Roughneck With 35 HD Mud Buddy
Ok sorry its taken a couple days but I did go to the river the other day with just my dog Jennings. I had two 6 gal tanks of fuel battery me (210) and the dog (75). I got the gps on the phone to work for a stretch of the river and in deep water it showed 31.3 mph it was kinda windy that day so the water was a light chop. Couldnt get it to work in shallow water but mudding and speed were no problem with the lighter load.
At the time the gps showed 31.3 mph i was runing straight up river at full throttle with the rpms at 3850. I could trim it up and pick up just a touch more speed but I was running 4125 rpm, and I dont want to run that high for extended time periods.
I have still yet to buy a hand held gps when I do I'll post more updates. Right now tho I'm saving my cash for opening day this weekend!!
_________________ 1652 Roughneck powered by Mud Buddy 35 HD Sport Mercury Trim with Custom Stainless Exhaust
|
Thu Nov 03, 2011 8:54 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
MOTimberHunter
MMT Member
Joined: Mon Apr 25, 2011 9:25 am Posts: 28 Location: Missouri
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: 1652 Lowe Roughneck With 35 HD Mud Buddy
Opening day duck season went not as hoped. The draw was for 38 spots we drew number 85 needless to say we did not hunt the marsh or timber where all the birds were and wanted to be.
Any how we hit the river.
Load----4 people 1 dog (225, 220, 240, 185, 70 = 940 lbs) *just actual weight everyone had waders and hunting clothing ontop that*
Gear----3 dozen decoys 70-100 lbs? 1 20 lb anchor
Gas----2 6 gal tanks 25 lbs
Total weight 1150-1350 lbs
Speeds 12-14 mph
Condition----windy, chop, over loaded lol!
Still was able to make it thru shallow water with mud bottom (5-9 inches)
Theory----If I had a single carb and motor upgrades with my performance exhaust I believe I could spin a 3 blade (or a standard big blade) faster and higher rpms and get boat on plane and actually increase abilities and not work motor as hard pushing all that water and load. Use after market performance and RPMs to get boat on plane and then back out of it so motor isnt working near as hard and doest "feel" that load as much.
Please let me know your thoughts on anything and especially my theory lol
Thanks
_________________ 1652 Roughneck powered by Mud Buddy 35 HD Sport Mercury Trim with Custom Stainless Exhaust
|
Mon Nov 07, 2011 3:53 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
MOTimberHunter
MMT Member
Joined: Mon Apr 25, 2011 9:25 am Posts: 28 Location: Missouri
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: 1652 Lowe Roughneck With 35 HD Mud Buddy
Don't mind the hen she got to close to the greenhead dropped both with one shot she was a accidental casualty of timber duckfare.
You do not have the required permissions to view the files attached to this post.
_________________ 1652 Roughneck powered by Mud Buddy 35 HD Sport Mercury Trim with Custom Stainless Exhaust
|
Mon Dec 05, 2011 12:07 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
greg f
MMT Pro Member
Joined: Sat Feb 05, 2011 10:02 pm Posts: 490 Location: Mexifornia
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: 1652 Lowe Roughneck With 35 HD Mud Buddy
|
Mon Dec 05, 2011 1:42 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
Bigbuckfever
MMT 1000 Club
Joined: Sat May 28, 2011 11:18 pm Posts: 2114 Location: Slinger, WI
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: 1652 Lowe Roughneck With 35 HD Mud Buddy
Pretty sure you are over the weight cap of that boat....just a guess though ![Idea :idea:](./images/smilies/icon_idea.gif)
_________________ Every day I'm paddlin' 1848 Gatortail boat and 37 efi GTR.
|
Mon Dec 05, 2011 1:45 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
MOTimberHunter
MMT Member
Joined: Mon Apr 25, 2011 9:25 am Posts: 28 Location: Missouri
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: 1652 Lowe Roughneck With 35 HD Mud Buddy
Actually I was just a little over and the old roughneck is a very stable boat I wasnt nuts about it but every now and then you gotta push some limits to kill birds. Most of the time i have 2 - 3 people and not near as much gear.
_________________ 1652 Roughneck powered by Mud Buddy 35 HD Sport Mercury Trim with Custom Stainless Exhaust
|
Mon Dec 05, 2011 9:44 pm |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
carmes001
MMT Member
Joined: Thu Nov 03, 2011 1:14 am Posts: 34
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: 1652 Lowe Roughneck With 35 HD Mud Buddy
where at in mo u located i hunt the river alot as well and also have a lowe only its a 1772,
|
Tue Dec 06, 2011 11:29 pm |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
MOTimberHunter
MMT Member
Joined: Mon Apr 25, 2011 9:25 am Posts: 28 Location: Missouri
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: 1652 Lowe Roughneck With 35 HD Mud Buddy
I hunt the Sac Osage river near Taberville, MO. As well as some surrounding public areas.
_________________ 1652 Roughneck powered by Mud Buddy 35 HD Sport Mercury Trim with Custom Stainless Exhaust
|
Wed Dec 07, 2011 10:46 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
DevilDogCruiser
MMT Pro Member
Joined: Wed Dec 16, 2009 11:43 am Posts: 249 Location: Fayetteville AR.
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: 1652 Lowe Roughneck With 35 HD Mud Buddy
|
Wed Dec 07, 2011 9:04 pm |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
MOTimberHunter
MMT Member
Joined: Mon Apr 25, 2011 9:25 am Posts: 28 Location: Missouri
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: 1652 Lowe Roughneck With 35 HD Mud Buddy
_________________ 1652 Roughneck powered by Mud Buddy 35 HD Sport Mercury Trim with Custom Stainless Exhaust
|
Fri Dec 09, 2011 2:26 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
DevilDogCruiser
MMT Pro Member
Joined: Wed Dec 16, 2009 11:43 am Posts: 249 Location: Fayetteville AR.
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: 1652 Lowe Roughneck With 35 HD Mud Buddy
|
Fri Dec 09, 2011 9:01 pm |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
tgrasshopper
MMT Member
Joined: Tue Jul 30, 2013 9:20 am Posts: 10
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: 1652 Lowe Roughneck With 35 HD Mud Buddy
Bringing a thread from the dead.
I'm about to buy the exact same setup and sometime I have to carry 4 People + gear. Now that I see the speed this setup get and I'm wondering if a 1852MT would be a better setup with that same motor?
Would the rig go faster at full load?
|
Thu Aug 01, 2013 12:39 pm |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
tgrasshopper
MMT Member
Joined: Tue Jul 30, 2013 9:20 am Posts: 10
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: 1652 Lowe Roughneck With 35 HD Mud Buddy
|
Thu Aug 01, 2013 1:07 pm |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
tgrasshopper
MMT Member
Joined: Tue Jul 30, 2013 9:20 am Posts: 10
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: 1652 Lowe Roughneck With 35 HD Mud Buddy
[quote="pintaildrake09"][/quote] I don't think I can get these boat here in canada? I have seen excel boat but they are in the 9K$ for a 16" from what I could understand.
|
Thu Aug 01, 2013 9:35 pm |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
Pete14
MMT Pro Member
Joined: Tue Mar 26, 2013 2:49 pm Posts: 445 Location: Southern Illinois
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: 1652 Lowe Roughneck With 35 HD Mud Buddy
Love my excel 1860. I would recommend one in a second!
_________________ [color=#80BF00][b]Excel 1860 swv4f4 with GTR35L with stage 1, cam, exhaust, heads
|
Thu Aug 01, 2013 11:15 pm |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
DuckhunterJC
MMT Member
Joined: Thu Aug 22, 2013 8:37 pm Posts: 3
|
![Post Post](./styles/acidtech_tiger/imageset/icon_topic_latest.gif) Re: 1652 Lowe Roughneck With 35 HD Mud Buddy
Very good info MOTimberHunter. Helped me out a lot. I have a 1650 Lowe and just ordered a 35 GDSD. I was very nervous about the performance. Seems in the future I should definitely upgrade to a slick bottom boat.
|
Sat Aug 24, 2013 4:53 am |
|
![](./styles/acidtech_tiger/theme/images/spacer.gif) |
|