Author |
Message |
benelli08
MMT F.E.
Joined: Wed Aug 29, 2012 3:42 pm Posts: 763
|
 Boat on the loose
Hit a curb turning on to a small bridge dint go wide enough took the turn 100 times before this time it caught me boat was strapped down poped all straps and landed completely upside down on the motor carb was holding on by the throttle cable I was 5 min from gator tail going try out the new 3 blade hyot said it could HAVE been a lot worse said I'm lucky it don't look like it broke to much stuff
You do not have the required permissions to view the files attached to this post.
_________________ 2010 gtr cdi with a stage 2 pushing a 18x46 home made HEAVY DUTY boat
|
Thu Mar 20, 2014 4:55 am |
|
 |
SETx Longtail
MMT 1000 Club
Joined: Sun Sep 01, 2013 2:53 pm Posts: 3480 Location: Hardin County, Tx
|
 Re: Boat on the loose
That is a sick feeling, I came close to loosing mine once after a trailer tire blew out on the interstate.
If I had to guess, your boat was tired of being seen riding around behind you with that ball cap bent to shit and decided to commit suicide... I hope you get everything lined out, does GT sell hats?
_________________ #CFFITR
-Custom pool noodle -stage 4 water wings
|
Thu Mar 20, 2014 5:01 am |
|
 |
benelli08
MMT F.E.
Joined: Wed Aug 29, 2012 3:42 pm Posts: 763
|
 Re: Boat on the loose
That's not me in the pic that's somebody that pulled over to help me I took the pic
_________________ 2010 gtr cdi with a stage 2 pushing a 18x46 home made HEAVY DUTY boat
|
Thu Mar 20, 2014 5:04 am |
|
 |
SETx Longtail
MMT 1000 Club
Joined: Sun Sep 01, 2013 2:53 pm Posts: 3480 Location: Hardin County, Tx
|
 Re: Boat on the loose
Thank goodness!!! 
_________________ #CFFITR
-Custom pool noodle -stage 4 water wings
|
Thu Mar 20, 2014 5:07 am |
|
 |
benelli08
MMT F.E.
Joined: Wed Aug 29, 2012 3:42 pm Posts: 763
|
 Re: Boat on the loose
I shoulda took a pic when it was upside down but I was freaking out and I don't know how but I flipped it over on it's side by ma self and I weigh 160 lbs soaking wet 3 of us couldn't get it back on the trailer had to pick it up with a front end loader
_________________ 2010 gtr cdi with a stage 2 pushing a 18x46 home made HEAVY DUTY boat
|
Thu Mar 20, 2014 5:16 am |
|
 |
benelli08
MMT F.E.
Joined: Wed Aug 29, 2012 3:42 pm Posts: 763
|
 Re: Boat on the loose
Im trying to look on the positives I got a good look at the bottom of my boat and It don't have any hooks in it
_________________ 2010 gtr cdi with a stage 2 pushing a 18x46 home made HEAVY DUTY boat
|
Thu Mar 20, 2014 5:20 am |
|
 |
mud slinger 69
MMT 1000 Club
Joined: Sun Aug 28, 2011 4:27 pm Posts: 1194 Location: Utah
|
 Re: Boat on the loose
Dam that sucks
_________________ We ant just mormons and polyganists we got rednecks too
|
Thu Mar 20, 2014 5:22 am |
|
 |
Randy S
MMT Pro Member
Joined: Sun Oct 02, 2011 4:03 pm Posts: 313 Location: NELA
|
 Re: Boat on the loose
That stinks; glad it didn't do too much damage. How hard was the hit? Would side rails on the trailer have helped any or do you think the boat would've just bent them over during its escape?
|
Thu Mar 20, 2014 5:44 am |
|
 |
fowllife08
MMT 1000 Club
Joined: Sun Sep 18, 2011 7:25 pm Posts: 3676 Location: down in da flats, LA
|
 Re: Boat on the loose
Just seen this on fb. Damn baw id be sick!!
_________________ 35 GTR chasin a BBC 1848
|
Thu Mar 20, 2014 5:47 am |
|
 |
duckduckboom
MMT Elite Member
Joined: Tue Nov 23, 2010 6:33 pm Posts: 5603 Location: Corner of Hell an high water, La
|
 Re: Boat on the loose
_________________ You have your whole life to be an idiot, take a day off!
|
Thu Mar 20, 2014 5:50 am |
|
 |
benelli08
MMT F.E.
Joined: Wed Aug 29, 2012 3:42 pm Posts: 763
|
 Re: Boat on the loose
I had side rails I took it off to try and get it back on the trailer but I wasn't budging
_________________ 2010 gtr cdi with a stage 2 pushing a 18x46 home made HEAVY DUTY boat
|
Thu Mar 20, 2014 5:51 am |
|
 |
duckduckboom
MMT Elite Member
Joined: Tue Nov 23, 2010 6:33 pm Posts: 5603 Location: Corner of Hell an high water, La
|
 Re: Boat on the loose
_________________ You have your whole life to be an idiot, take a day off!
|
Thu Mar 20, 2014 5:56 am |
|
 |
msm8281
MMT Elite Member
Joined: Fri Oct 09, 2009 1:50 pm Posts: 9673 Location: New Iberia, La.
|
 Re: Boat on the loose
Mine fell off once when strap broke. I pushed the front off the trailer so the boat was flat on the ground. I then positioned the trailer in front of it. I then unhooked from the truck and used the trailer winch to winch the trailer under the boat. Then someone stopped to help when I was about finished:lol:
|
Thu Mar 20, 2014 5:56 am |
|
 |
DUCK HEARSE
MMT 1000 Club
Joined: Fri Apr 06, 2012 8:48 am Posts: 3161 Location: Alabama
|
 Re: Boat on the loose
Your wife or girl friend is looking like you dumb ass 
_________________ Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover. - Mark Twain
|
Thu Mar 20, 2014 5:59 am |
|
 |
benelli08
MMT F.E.
Joined: Wed Aug 29, 2012 3:42 pm Posts: 763
|
 Re: Boat on the loose
That's not ma ole lady that's the ppl that lived in the house across the street
_________________ 2010 gtr cdi with a stage 2 pushing a 18x46 home made HEAVY DUTY boat
|
Thu Mar 20, 2014 6:11 am |
|
 |
DUCK HEARSE
MMT 1000 Club
Joined: Fri Apr 06, 2012 8:48 am Posts: 3161 Location: Alabama
|
 Re: Boat on the loose
_________________ Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover. - Mark Twain
|
Thu Mar 20, 2014 6:12 am |
|
 |
North LA Hunter
MMT Elite Member
Joined: Mon Aug 02, 2010 8:39 pm Posts: 6976 Location: West Monroe, LA
|
 Re: Boat on the loose
That's sucks for sure but it could have been worse! Glad everything is okay!
Sent from my beeper
|
Thu Mar 20, 2014 6:12 am |
|
 |
msm8281
MMT Elite Member
Joined: Fri Oct 09, 2009 1:50 pm Posts: 9673 Location: New Iberia, La.
|
 Re: Boat on the loose
Well she's still thinking it. I promise you:lol:
|
Thu Mar 20, 2014 6:13 am |
|
 |
benelli08
MMT F.E.
Joined: Wed Aug 29, 2012 3:42 pm Posts: 763
|
 Re: Boat on the loose
It's not ok yet they had a wet spot on the road where the motor was hope it was just gas. But it's at gator tail Kyle and hyot walked out said boy one day they gonna write a story bout you I'm always bring ma shit there cause I break something out if the ordinary
_________________ 2010 gtr cdi with a stage 2 pushing a 18x46 home made HEAVY DUTY boat
|
Thu Mar 20, 2014 6:16 am |
|
 |
petrel
MMT F.E.
Joined: Mon Jan 11, 2010 9:51 am Posts: 770 Location: NVA
|
 Re: Boat on the loose
Sorry to see your rig like that. Glad to hear the damage wasn't extensive.
Would you mind elaborating on the tie down strap failure? Did the straps shear or did the fastening points fail? How was the boat secured to the trailer? Just trying to learn from your experience.
_________________ Phowler 2066 w/ E5 37 ProDrive w/ Illowa Marine Heads MoMarsh Fatboy/2 Honda
|
Thu Mar 20, 2014 6:28 am |
|
 |
benelli08
MMT F.E.
Joined: Wed Aug 29, 2012 3:42 pm Posts: 763
|
 Re: Boat on the loose
Front winch poped had to re tie back straps one of them poped and the other one came off when the other one poped because it dint have a bind on it any more the trailer rolled off the ball only thing keeping the trailer on was the chains
_________________ 2010 gtr cdi with a stage 2 pushing a 18x46 home made HEAVY DUTY boat
|
Thu Mar 20, 2014 6:32 am |
|
 |
fowllife08
MMT 1000 Club
Joined: Sun Sep 18, 2011 7:25 pm Posts: 3676 Location: down in da flats, LA
|
 Re: Boat on the loose
Might look into these ones
You do not have the required permissions to view the files attached to this post.
_________________ 35 GTR chasin a BBC 1848
|
Thu Mar 20, 2014 6:45 am |
|
 |
benelli08
MMT F.E.
Joined: Wed Aug 29, 2012 3:42 pm Posts: 763
|
 Re: Boat on the loose
Where you get that from
_________________ 2010 gtr cdi with a stage 2 pushing a 18x46 home made HEAVY DUTY boat
|
Thu Mar 20, 2014 7:04 am |
|
 |
Mudmotor Slayer
MMT 1000 Club
Joined: Tue Aug 20, 2013 12:52 pm Posts: 1783
|
 Re: Boat on the loose
Stay off that weed
|
Thu Mar 20, 2014 7:06 am |
|
 |
fowllife08
MMT 1000 Club
Joined: Sun Sep 18, 2011 7:25 pm Posts: 3676 Location: down in da flats, LA
|
 Re: Boat on the loose
_________________ 35 GTR chasin a BBC 1848
|
Thu Mar 20, 2014 7:08 am |
|
 |
DUCK HEARSE
MMT 1000 Club
Joined: Fri Apr 06, 2012 8:48 am Posts: 3161 Location: Alabama
|
 Re: Boat on the loose
_________________ Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover. - Mark Twain
|
Thu Mar 20, 2014 7:10 am |
|
 |
RootSumn
MMT 1000 Club
Joined: Thu Jan 13, 2011 11:55 am Posts: 1126 Location: Hawthorne, Fl
|
 Re: Boat on the loose
Dammit man! Hate that for ya. It could of been a lot worse.
About 4 years ago I took off work for 3 weeks for the start of the second phase. I was two weeks into it and had duck hunted every morning and deer hunted every afternoon, running on RedBull. Finished hunting one morning and started to nod off on the way home while it was raining really bad. Next thing I know I'm heading for the ditch with boat in tow. I eased my truck back on the road so it wouldn't flip, but my boat came up on the road at a bad angle and flipped taking the trailer with it. It f'd up the 27 MB that I had on it but the boat was fine. 2 weeks worth of cans, decoys, and ducks spread about 80 yards. That was a beotch. Thank God I live in the country, 3 guys pulled up and we had it all back together in 5 mins.
_________________ 1654 Grizzly '13 35 GDSD
"You should be more concerned with watching football than making chit fall out the sky!!!" - My Wife
|
Thu Mar 20, 2014 7:13 am |
|
 |
DeltaRunner
MMT Pro Member
Joined: Fri Oct 25, 2013 5:50 am Posts: 482 Location: South Alabama
|
 Re: Boat on the loose
Damn! You must have been hauling ass!
_________________ 1648 GDSD 27 GDSD
|
Thu Mar 20, 2014 7:15 am |
|
 |
Migrator
MMT 1000 Club
Joined: Sun Apr 17, 2011 2:29 pm Posts: 3227 Location: Black River, MS
|
 Re: Boat on the loose
_________________ WC CUSTOM 20X54 Battleship w/ Gator Glide Pushed & Pulled hard by an HDR!
Don't be scared...Hit It and Hold It!!!
|
Thu Mar 20, 2014 7:23 am |
|
 |
benelli08
MMT F.E.
Joined: Wed Aug 29, 2012 3:42 pm Posts: 763
|
 Re: Boat on the loose
I wasant going fast cause I was waiting to turn it was a big ass curb bout 1 1/2 ft
_________________ 2010 gtr cdi with a stage 2 pushing a 18x46 home made HEAVY DUTY boat
|
Thu Mar 20, 2014 7:26 am |
|
 |
Migrator
MMT 1000 Club
Joined: Sun Apr 17, 2011 2:29 pm Posts: 3227 Location: Black River, MS
|
 Re: Boat on the loose
Damn square chines, a round chine would have made that turn. Glad you are not too bad messed up. Hope they can work you in and get you back on the water.
_________________ WC CUSTOM 20X54 Battleship w/ Gator Glide Pushed & Pulled hard by an HDR!
Don't be scared...Hit It and Hold It!!!
|
Thu Mar 20, 2014 7:27 am |
|
 |
Swampnuts
MMT 1000 Club
Joined: Wed Dec 12, 2012 3:12 pm Posts: 1504 Location: St.Amant,LA
|
 Re: Boat on the loose
Kool-aid an sharp turns don't work
_________________ 16X48 WELDBILT -25GTR EFI-sold 18x48 GTB - 35 GTR
Crown royal pro-staff
|
Thu Mar 20, 2014 11:56 am |
|
 |
LA Prop
MMT Sponsor
Joined: Sat Feb 01, 2014 6:31 pm Posts: 1008
|
 Re: Boat on the loose
Well it could have been worse if ya dad was driving it would have been drug down the road a lil ways
_________________ 20' homemade skiff with a stage 2 gtr
|
Thu Mar 20, 2014 3:28 pm |
|
 |
benelli08
MMT F.E.
Joined: Wed Aug 29, 2012 3:42 pm Posts: 763
|
 Re: Boat on the loose
_________________ 2010 gtr cdi with a stage 2 pushing a 18x46 home made HEAVY DUTY boat
|
Thu Mar 20, 2014 3:48 pm |
|
 |
gator22
MMT 1000 Club
Joined: Tue Nov 27, 2012 6:06 am Posts: 3469 Location: bridge city tx
|
 Re: Boat on the loose
that sucks.... that gg is slick. must of got on your tires too 
_________________ 18x46 40.
|
Thu Mar 20, 2014 3:59 pm |
|
 |
fowllife08
MMT 1000 Club
Joined: Sun Sep 18, 2011 7:25 pm Posts: 3676 Location: down in da flats, LA
|
 Re: Boat on the loose
_________________ 35 GTR chasin a BBC 1848
|
Thu Mar 20, 2014 7:20 pm |
|
 |
THE TANK
MMT 1000 Club
Joined: Wed Mar 04, 2009 7:34 pm Posts: 1080 Location: Coteau Homles, La
|
 Re: Boat on the loose
|
Thu Mar 20, 2014 7:56 pm |
|
 |
Bootzz
MMT Pro Member
Joined: Tue Jan 13, 2009 6:12 pm Posts: 499 Location: DA BACK OF DA BACK,Louisiana
|
 Re: Boat on the loose
Hey serious question!!!! Did the axle on the trailer shift?! I turned to go over the levee ones ring and hooked a pot hole and it shifted my axle and I had to launch the damn boat and re align my axle cuz they only held on by u-bolts and the u-bolts slide down the rails
|
Thu Mar 20, 2014 9:52 pm |
|
 |
benelli08
MMT F.E.
Joined: Wed Aug 29, 2012 3:42 pm Posts: 763
|
 Re: Boat on the loose
I never looked at the trailer that was the last of my worries and yea it does have GG on it The tank got there after I got it back on the trailer idk how he knew but he called me right up Guess word travels fast
_________________ 2010 gtr cdi with a stage 2 pushing a 18x46 home made HEAVY DUTY boat
|
Fri Mar 21, 2014 3:18 am |
|
 |
benelli08
MMT F.E.
Joined: Wed Aug 29, 2012 3:42 pm Posts: 763
|
 Re: Boat on the loose
I hope the trailer is totaled cause I got fucked when I bought it dude told me that it would fit a 18 ft boat And said if it dint I could return it and get a diffrent one if it was to small we'll it was to small with the boat all the way on the trailer and not hanging off it's extremely tounge heavy takes two ppl to pick it up so I hope it's junk and I can get insurance to cover it and get me a longer one Don't buy trailers from mike Gerald trailer in Batton rouge
_________________ 2010 gtr cdi with a stage 2 pushing a 18x46 home made HEAVY DUTY boat
|
Fri Mar 21, 2014 3:22 am |
|
 |
|