It is currently Tue Jul 01, 2025 8:29 am




Reply to topic  [ 16 posts ] 
 Surface drive advice needed 
Author Message
MMT Member

Joined: Tue Jun 24, 2014 10:27 pm
Posts: 6
Post Surface drive advice needed
I have a 17x38 boat similar to the boats godevil makes in design. I want to know how fast a 23hp GDSD would push the boat with 2 people and a dog. I need a 23 that's can get me up to at least 20 or will I need a bigger motor?


Wed Jun 25, 2014 5:11 pm
Profile
MMT Pro Member
User avatar

Joined: Fri Jul 17, 2009 8:59 am
Posts: 259
Post Re: Surface drive advice needed
I have a 1636 skiff with a MB23SD that runs barely 20 with that load.
I bet that 17' does just as well or better


Thu Jun 26, 2014 8:25 pm
Profile
MMT Elite Member
User avatar

Joined: Tue Jan 13, 2009 7:19 pm
Posts: 6441
Location: Trinity Bay - Texas
Post Re: Surface drive advice needed

_________________
Eat - Sleep - Hunt ! ! !

"It is good to have an end to journey toward; but
it is the journey that matters, in the end."


Thu Jun 26, 2014 8:37 pm
Profile
MMT Member

Joined: Tue Jun 24, 2014 10:27 pm
Posts: 6
Post Re: Surface drive advice needed
I don't usually load the boat down really heavy just decoys guns the dog and a friend, its a long run to the lease and my 16hp longtail only goes around 12 or 13 with a hunting load. I need a bigger motor just don't have much money to buy a new motor bigger than a 23. Might try to find something used


Thu Jun 26, 2014 8:57 pm
Profile
MMT 1000 Club

Joined: Thu May 23, 2013 4:24 pm
Posts: 2912
Location: Thibodaux, La
Post Re: Surface drive advice needed
I got 20.3 with two guys and a hunting load with my old light hull with a 23 GDSD. The only problem is the width of your boat. The hull I had was a 46 inch bottom.

_________________
1850 Predator Series Stick Steer Option
40HP Gatortail


Fri Jun 27, 2014 6:25 am
Profile WWW
MMT 1000 Club
User avatar

Joined: Wed Jan 14, 2009 8:18 pm
Posts: 4915
Location: Lake Jackson, TX
Post Re: Surface drive advice needed
Go big block!

_________________
37 PD EFI FPR 18x48 Tiller
SOLD -- 36 PD EFI FPR 18x48 Stick Steer
SOLD -- 27 PD FPR 16x36 Skiff


Fri Jun 27, 2014 6:34 am
Profile
MMT Elite Member
User avatar

Joined: Mon Aug 02, 2010 8:39 pm
Posts: 6976
Location: West Monroe, LA
Post Re: Surface drive advice needed


Fri Jun 27, 2014 6:40 am
Profile
MMT Member

Joined: Tue Jun 24, 2014 10:27 pm
Posts: 6
Post Re: Surface drive advice needed
What's the biggest you guys think I can get away with? Was concerned about anything bigger being too heavy or the boat, and thanks for the help guys


Fri Jun 27, 2014 10:52 am
Profile
MMT Elite Member

Joined: Wed Mar 11, 2009 12:45 pm
Posts: 9869
Post Re: Surface drive advice needed
Maybe try to find a used 27 gdsd

Sent from my XT1080 using Tapatalk


Fri Jun 27, 2014 11:17 am
Profile
MMT 1000 Club
User avatar

Joined: Wed Jan 14, 2009 8:18 pm
Posts: 4915
Location: Lake Jackson, TX
Post Re: Surface drive advice needed
I ran a 27 Prodrive on a 16x36 and the sides had very little flare. I'm 175 and had the battery in the back. Stock motor ran 30 all day. As you as you aren't 400 lbs, your boat would float a big block. The 36hp was only 30 or so lbs heavier than my 27.

_________________
37 PD EFI FPR 18x48 Tiller
SOLD -- 36 PD EFI FPR 18x48 Stick Steer
SOLD -- 27 PD FPR 16x36 Skiff


Fri Jun 27, 2014 11:46 am
Profile
MMT Member

Joined: Tue Jun 24, 2014 10:27 pm
Posts: 6
Post Re: Surface drive advice needed
I think I'll try to find a used 27 or 35 in good shape thanks for the help


Fri Jun 27, 2014 2:44 pm
Profile
MMT Elite Member
User avatar

Joined: Tue Jan 13, 2009 7:19 pm
Posts: 6441
Location: Trinity Bay - Texas
Post Re: Surface drive advice needed

_________________
Eat - Sleep - Hunt ! ! !

"It is good to have an end to journey toward; but
it is the journey that matters, in the end."


Fri Jun 27, 2014 9:07 pm
Profile
MMT 1000 Club

Joined: Thu May 23, 2013 4:24 pm
Posts: 2912
Location: Thibodaux, La
Post Re: Surface drive advice needed
I might be the only person to say this but I really like the 27PD with EFI. That little motor has good power. I drive a 35HP GDSD now and it performs very well. The 27HP GDSD has the same lower unit as the 35HP. It gets much better bite than the 23. I have owned both and prefer the longer lower unit. The 27 is actually now classified as a 25 so you get the benefit of using it on game reserves.

_________________
1850 Predator Series Stick Steer Option
40HP Gatortail


Fri Jun 27, 2014 9:10 pm
Profile WWW
MMT Pro Member
User avatar

Joined: Mon Jul 25, 2011 11:48 pm
Posts: 71
Location: Michigan
Post Re: Surface drive advice needed
I had a 27 on my 16x38 hd, stock it would do 24 with moderate load, modded it would run 30, went to a 35 and it was spectacular on low end, ran 26 stock, modded it runs mid 30`s. There is no replacement for displacement, however that kohler block is built way better than the briggs. I think u will be happy with either one. I loved that kohler, but when I crack the throttle now I seem to forget it ever existed....... Good luck with which ever you choose.

_________________
1854 Uncle J
PD in a box....


Sat Jun 28, 2014 9:30 am
Profile
MMT Pro Member
User avatar

Joined: Mon Jul 25, 2011 11:48 pm
Posts: 71
Location: Michigan
Post Re: Surface drive advice needed
Double post.....

_________________
1854 Uncle J
PD in a box....


Sat Jun 28, 2014 9:31 am
Profile
MMT Pro Member

Joined: Fri May 24, 2013 2:46 pm
Posts: 242
Post Re: Surface drive advice needed
Or look at the 23 Copperhead. Phowler gets great speeds on their smaller boats with these and the weight is about 80lbs less than the GoDevil or similar small blocks.

Sent from my SCH-R950 using Tapatalk


Sat Jun 28, 2014 10:29 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 16 posts ] 

Who is online

Users browsing this forum: No registered users and 246 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: