|
|
FAQ
• Login
|
|
It is currently Thu Oct 31, 2024 7:00 pm
|
|
Page 1 of 1
|
[ 9 posts ] |
|
| Author |
Message |
|
tryan
MMT Member
Joined: Mon Aug 22, 2011 10:07 am
Posts: 25
|
 Hammer prop Has anybody ever put a hammer prop on a Kohler 27hp mud buddy hdr? How did it perform compared to the big blade?
|
| Wed Apr 15, 2020 4:22 pm |
|
|
|
bluesky2012
MMT F.E.
Joined: Mon Jul 14, 2014 8:19 am
Posts: 981
|
Hammer prop Good luck... doesn’t have the guts to turn it.
Sent from my iPhone using Tapatalk Pro
|
| Wed Apr 15, 2020 4:42 pm |
|
|
|
Wilbur T
MMT Pro Member
Joined: Sun Jun 16, 2019 6:45 am
Posts: 78
Location: Lake County Florida
|
Re: Hammer prop I think I will have to agree with that. Doesn't have the stones to turn it. That's the same motor I have.
_________________
"SlowRide"
Excel F4 1651 Mud Buddy 25EFI
|
| Thu Apr 16, 2020 3:14 am |
|
|
|
brycecheramie
MMT 1000 Club
Joined: Thu Nov 04, 2010 7:38 am
Posts: 4323
Location: Cut Off, La.
|
Re: Hammer prop a stock 35 and I think even a stock 37 don't even have the nuts to turn a hammer.
Don't waste your money.
_________________
Refurbishing a Prodrive
|
| Thu Apr 16, 2020 7:14 am |
|
|
|
ronbow
MMT Pro Member
Joined: Sat Aug 15, 2009 2:40 pm
Posts: 137
Location: Wolf Bay,Alabama
|
Re: Hammer prop Ole Ronbow had 6 different boats an motors from 2000 til now, last 2 were 4400 HDRs been running a hammer on both yes it wont get the RPM to max advantage but i like the beefyness over the big blade cause it last way longer. being a reliability kind of guy that fine with me.RPM is what kills theese motors boys and for very little extra speed gain.Maybe some CNC guru will make a billet block for aftermarket for us then u will see a big improvement in high performance and reliability. I dont think ur 27 will get any advantage with a Hammer. Says Ole Ronbow
_________________
Gator Trax 16/50 ---HDR Black Death 4500 BPS SWAMP STAFF
|
| Fri Apr 17, 2020 5:16 am |
|
|
|
Wchauvin
MMT 1000 Club
Joined: Sat Sep 30, 2017 7:10 pm
Posts: 1872
|
Re: Hammer prop You can’t turn a hammer with a 27.
|
| Fri Apr 17, 2020 9:17 am |
|
|
|
Russ
MMT 1000 Club
Joined: Mon Dec 31, 2012 11:07 pm
Posts: 4820
Location: West Monroe, LA
|
Re: Hammer prop Bet you $100 he can turn it. On the trialer and at low rpms, it'll turn fine. It just won't accomplish the goal of moving the boat very well in any use case where these motors are designed to be run.
Sent from my SM-G970U using Tapatalk
|
| Fri Apr 17, 2020 9:41 am |
|
|
|
Wchauvin
MMT 1000 Club
Joined: Sat Sep 30, 2017 7:10 pm
Posts: 1872
|
Re: Hammer prop Trailer** 
|
| Fri Apr 17, 2020 5:08 pm |
|
|
|
LA Prop
MMT Sponsor
Joined: Sat Feb 01, 2014 6:31 pm
Posts: 1008
|
Re: Hammer prop U can run a cut hammer on that motor just gunna have to be careful on how much pitch u have put in it. However if u wanna runs a performance prop on it call me I have some props that work well on the smaller motors if u need.
_________________
20' homemade skiff with a stage 2 gtr
|
| Sun May 10, 2020 10:16 pm |
|
|
|
|
|
Page 1 of 1
|
[ 9 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 69 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
