Author |
Message |
Cubman
MMT Pro Member
Joined: Sun May 16, 2010 8:53 pm Posts: 254 Location: East TN
|
Riv Nuts in Go Devil Gunnel
I am mounting 4 100w LEDs on my 1838 to shoot fish. The back pair need to go between the front deck and middle bench to get the best coverage. Is the extruded material Go Devil uses to make their gunnel thick/strong enough for me to mount these lights with riv nuts?
|
Sun Mar 31, 2019 7:39 pm |
|
|
Buckmark311
MMT Pro Member
Joined: Wed Sep 16, 2015 11:50 am Posts: 284
|
Re: Riv Nuts in Go Devil Gunnel
I think you are going to want to figure out another way. That is a lot of stress from the weight of lights bouncing on the hwy or slapping chop while motoring. Id suggest fabricating a drop-in style deck and hung a light rail pin to it and pin to the spud pole mount in the front. I can send you pics of mine if needed.
|
Mon Apr 01, 2019 9:33 am |
|
|
DmaxHunter
MMT 1000 Club
Joined: Wed Jan 18, 2012 7:21 pm Posts: 2207 Location: North Alabama
|
Re: Riv Nuts in Go Devil Gunnel
We put rivnuts in boats all the time, just get good riv nuts, don't use the cheap that comes in that harbor freight crap. Amazon has good ones that seat, and are up to grade 8, if im not mistaken.
Sent from my SM-N950U using Tapatalk
_________________ 2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD
2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD
|
Mon Apr 01, 2019 7:06 pm |
|
|
Wchauvin
MMT 1000 Club
Joined: Sat Sep 30, 2017 7:10 pm Posts: 1872
|
Re: Riv Nuts in Go Devil Gunnel
I agree with dmax, just use quality ones and you should be fine. The amazon ones are good, we have also used them before in the past with success
|
Mon Apr 01, 2019 7:49 pm |
|
|
Darryle
MMT Pro Member
Joined: Sun Mar 22, 2009 3:44 pm Posts: 250 Location: Fort Worth, Texas
|
Re: Riv Nuts in Go Devil Gunnel
Make sure you get a quality riv-nut setter.
I use these things in aviation all the time, the type of setter makes a difference between installed and a quality installation.
I used the ones that were countersunk versus the ones that had flat heads, allowed me to have a flush install.
Go get a small can of zinc chromate primer and coat the holes and riv-nuts so they don't oxidize internally, once installed and set, you can wipe the excess primer from the surface.
_________________ 2017 Atchafalaya Outdoor Designs 1244 2017 Copperhead 12hp
|
Tue Apr 02, 2019 2:01 am |
|
|
Will
MMT Elite Member
Joined: Fri Jul 08, 2011 1:54 pm Posts: 8133
|
Re: Riv Nuts in Go Devil Gunnel
Riv nuts are awesome, I bolted down a bedslide in the back of my truck with some and they're solid as a rock.
_________________ Before the internet, the majority of the village idiots stayed in their villages.
|
Wed Apr 03, 2019 5:23 am |
|
|
Cubman
MMT Pro Member
Joined: Sun May 16, 2010 8:53 pm Posts: 254 Location: East TN
|
Re: Riv Nuts in Go Devil Gunnel
I have no doubt a riv nut will hold. I was worried about the extruded gunnel that go devil welds on top of the sides. I doubt it is very thick but I've never drilled/cut into it.
|
Wed Apr 03, 2019 7:06 pm |
|
|
DmaxHunter
MMT 1000 Club
Joined: Wed Jan 18, 2012 7:21 pm Posts: 2207 Location: North Alabama
|
Re: Riv Nuts in Go Devil Gunnel
Most gunnels are atleast 1/8 which is able to take and hold a rivnut. Allot of guys riv nut there lights, blinds, etc. Just take the advice given and the rivnut will hold
Sent from my SM-N950U using Tapatalk
_________________ 2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD
2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD
|
Wed Apr 03, 2019 8:49 pm |
|
|
bluesky2012
MMT F.E.
Joined: Mon Jul 14, 2014 8:19 am Posts: 981
|
Re: Riv Nuts in Go Devil Gunnel
|
Thu Apr 04, 2019 7:06 am |
|
|
Will
MMT Elite Member
Joined: Fri Jul 08, 2011 1:54 pm Posts: 8133
|
Re: Riv Nuts in Go Devil Gunnel
I use the bolt, nut and washer method. Haha
_________________ Before the internet, the majority of the village idiots stayed in their villages.
|
Thu Apr 04, 2019 9:39 am |
|
|
Darryle
MMT Pro Member
Joined: Sun Mar 22, 2009 3:44 pm Posts: 250 Location: Fort Worth, Texas
|
Re: Riv Nuts in Go Devil Gunnel
_________________ 2017 Atchafalaya Outdoor Designs 1244 2017 Copperhead 12hp
|
Thu Apr 04, 2019 9:45 pm |
|
|
Will
MMT Elite Member
Joined: Fri Jul 08, 2011 1:54 pm Posts: 8133
|
Re: Riv Nuts in Go Devil Gunnel
_________________ Before the internet, the majority of the village idiots stayed in their villages.
|
Fri Apr 05, 2019 3:58 am |
|
|
Darryle
MMT Pro Member
Joined: Sun Mar 22, 2009 3:44 pm Posts: 250 Location: Fort Worth, Texas
|
Re: Riv Nuts in Go Devil Gunnel
_________________ 2017 Atchafalaya Outdoor Designs 1244 2017 Copperhead 12hp
|
Fri Apr 05, 2019 1:15 pm |
|
|
Fuquabw2016
MMT Pro Member
Joined: Wed Aug 03, 2016 9:03 pm Posts: 189
|
Re: Riv Nuts in Go Devil Gunnel
This is tool I got from go devil for my hull when ordered bolt on stud pole kit use 3/8 bolts in nutserts , they hold great
You do not have the required permissions to view the files attached to this post.
|
Fri Apr 05, 2019 9:01 pm |
|
|
|