| MudmotorTalk.com https://mudmotortalk.com/mmt_v2/ |
|
| Briggs 36hp pro drive https://mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=75338 |
Page 1 of 1 |
| Author: | rsamuelson90 [ Sat Oct 10, 2020 6:07 pm ] |
| Post subject: | Briggs 36hp pro drive |
So I went to change my ignition out on the control box and after install it turned over but did not start. I noticed some smoke coming out of the top of the flywheel area. Now I don’t have anything, will not turn over, no click when push the momentary/blade switch, nothing. I did notice on the magneto/coil pack a small like 14g wire that must have been the smoke. It was black and as soon as I wiggled it the wire broke. Anyone got An key switch wire guide, I was pretty sure I had it right, but the new one is a tad different than the old one. Any ideas on why I don’t have nothing? I jumped the starter with pliers and it engaged, but did not let it crank. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|