| MudmotorTalk.com https://mudmotortalk.com/mmt_v2/ |
|
| Need advice on go devil hull. Fast! https://mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=68641 |
Page 1 of 1 |
| Author: | GAduckHunter12 [ Fri Oct 14, 2016 9:24 pm ] |
| Post subject: | Need advice on go devil hull. Fast! |
Ok so I found a 16/44 with a 27 lt locally for a pretty good price. My problem is the bottom of the boat is hooked and has some pretty good dents near the front. Should I pass or will it be alright?? Need to have the guy an answer within a couple of days so any help would be appreciated |
|
| Author: | flint87 [ Sat Oct 15, 2016 5:53 am ] |
| Post subject: | Re: Need advice on go devil hull. Fast! |
| Author: | GAduckHunter12 [ Sat Oct 15, 2016 6:37 am ] |
| Post subject: | Re: Need advice on go devil hull. Fast! |
That's the thing I plan on putting a surface drive on the boat |
|
| Author: | dead animal [ Sat Oct 15, 2016 7:17 am ] |
| Post subject: | Re: Need advice on go devil hull. Fast! |
what do you want to do? duck hunt or be in a fashion parade? if u want to kill ducks and need a boat, there u go. if you want a new, fancy rig, then do that. it's really that simple. good luck. |
|
| Author: | GAduckHunter12 [ Sat Oct 15, 2016 7:25 am ] |
| Post subject: | Re: Need advice on go devil hull. Fast! |
^^this is why I rarely post on here. Just wanting advice on performance before I spend thousands of dollars. |
|
| Author: | Russ [ Sat Oct 15, 2016 8:03 am ] |
| Post subject: | Re: Need advice on go devil hull. Fast! |
It's gonna suffer because of the hooks with an SD, depending on how bad they are and where they are. That's been well established by many previous posts. Flint recently filled his hooks, everything got better. Pretty decent write up on it, too. You haven't posted any pics, so your question isn't answerable for that specific boat. |
|
| Author: | Gigafowl [ Sat Oct 15, 2016 8:25 am ] |
| Post subject: | Re: Need advice on go devil hull. Fast! |
| Author: | flint87 [ Sat Oct 15, 2016 11:36 am ] |
| Post subject: | Re: Need advice on go devil hull. Fast! |
The way I look at it is if you don't have a surface drive to hang on it yet then get it and fix the bottom, turn it for a little profit when you're ready to upgrade. I'm also in Georgia and I saw this boat on the Macon Craigslist. I'd offer $3200-3500 depending on how bad the bottom looks. Sent from my iPhone using Tapatalk |
|
| Author: | TPerkins [ Sat Oct 15, 2016 1:34 pm ] |
| Post subject: | Re: Need advice on go devil hull. Fast! |
Kool-aid aside, I've ran in a 18x44 go devil and I was beyond impressed with how it performed. Sent from my SM-G920V using Tapatalk |
|
| Author: | Ricerunner [ Sun Oct 16, 2016 3:05 am ] |
| Post subject: | Re: Need advice on go devil hull. Fast! |
| Author: | mizzippi jb [ Sun Oct 16, 2016 7:46 am ] |
| Post subject: | Re: Need advice on go devil hull. Fast! |
I ran a 16 44 go devil with a 36 pro drive for a while. I had a lot of fun in that boat, it was pretty good with 3 folks in it, but it didn't like much more weight than that. It would run 26 before I modded it, stage 1 it ran 30 with just me Sent from my SM-G900V using Tapatalk |
|
| Author: | Gigafowl [ Sun Oct 16, 2016 10:01 pm ] |
| Post subject: | Re: Need advice on go devil hull. Fast! |
| Author: | banded-mallard [ Mon Oct 17, 2016 4:33 am ] |
| Post subject: | Re: Need advice on go devil hull. Fast! |
| Author: | med [ Mon Oct 17, 2016 6:13 am ] |
| Post subject: | Re: Need advice on go devil hull. Fast! |
I'd say pass. Itll be hard to pass along a beat up rig. Keep looking. Especially if you are wanting a sd. My last boat was a 1644 with a pd and didn't really care for the combo. |
|
| Author: | flint87 [ Tue Oct 18, 2016 5:59 pm ] |
| Post subject: | Re: Need advice on go devil hull. Fast! |
Op buy my boat. Pm sent Sent from my iPhone using Tapatalk |
|
| Author: | bigchevrolet [ Thu Oct 20, 2016 1:22 pm ] |
| Post subject: | Re: Need advice on go devil hull. Fast! |
| Author: | flint87 [ Thu Oct 20, 2016 1:38 pm ] |
| Post subject: | Re: Need advice on go devil hull. Fast! |
| Author: | kirk [ Thu Oct 20, 2016 6:13 pm ] |
| Post subject: | Re: Need advice on go devil hull. Fast! |
| Author: | flint87 [ Sat Oct 22, 2016 12:30 pm ] |
| Post subject: | Re: Need advice on go devil hull. Fast! |
| Author: | bigchevrolet [ Sun Oct 23, 2016 7:43 pm ] |
| Post subject: | Re: Need advice on go devil hull. Fast! |
Thank you |
|
| Author: | flint87 [ Mon Oct 24, 2016 7:32 am ] |
| Post subject: | Re: Need advice on go devil hull. Fast! |
Updating this thread. Just found out my friend bought this boat the OP was looking at. Haven't seen it yet but he says the bottom is not bad at all. Sent from my iPhone using Tapatalk |
|
| Author: | Burch [ Thu Nov 03, 2016 2:53 pm ] |
| Post subject: | Re: Need advice on go devil hull. Fast! |
Dents on a boat with longitudinal runners do not affect performance as much as dents on a boat with ribs running across it. You probably missed a good deal. As per DA"s post he shot you some good advice. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|