Author |
Message |
killin'time
MMT Member
Joined: Sat Jul 27, 2013 12:40 pm Posts: 16
|
Godevil 1636 duck skiff revamp
Since the ducks have failed to find our duck lease this year, I thought I'd take a little time to detail my 2000 godevil duck skiff remodel. I have always had a desire to own one of these boats, so when the opportunity arose in 2012, I pulled the trigger. When I bought the boat it was equipped with a 16hp longtail that I used through the 2015 season. Motor still ran, but with a growing son, I could feel the boat getting slower and slower each year. So in October I decide it was time to upgrade to a surface drive unit. I purchased a 2014 mudbuddy 25 mini for the re-power. I was concerned about the additional weight the new motor would add, so I removed the flotation pods on port and starboard side and relocated the battery and gas tank to the front of the boat. The foam I removed was not wet, but the aluminum and foam weighed in at nearly 40 lbs. Since I completely removed the flotation pods, I was concerned that I removed some of the transom support, so I had a friend of mine's brother weld in some extra support. Come to find out my friend's brother used to work for Godevil and had actually built my boat (his initials are stamped on the bow ). I also removed the flotation from the floors (it too was dry). Since the start of duck season was right around the corner I opted to paint with krylon shaky cans. I know the paint job won't last but a few seasons, but I always touch it up after each season. With the weight removed and relocated the mud buddy 25 pushes the boat loaded at 21 mph (3 men, 2 dozen decoys, ice chest, blind, 3 gals of fuel). With just me and blind (which drags in the water) it pushes 24 mph. I plan on adding hydro-turf to the floors and front deck at the conclusion of duck season. I'll add pics of the boat with the blind when I get back to the duck camp.
You do not have the required permissions to view the files attached to this post.
|
Sun Nov 27, 2016 7:13 pm |
|
|
killin'time
MMT Member
Joined: Sat Jul 27, 2013 12:40 pm Posts: 16
|
Re: Godevil 1636 duck skiff revamp
Pics of the finished product
You do not have the required permissions to view the files attached to this post.
|
Sun Nov 27, 2016 7:15 pm |
|
|
killin'time
MMT Member
Joined: Sat Jul 27, 2013 12:40 pm Posts: 16
|
Re: Godevil 1636 duck skiff revamp
Last ones
You do not have the required permissions to view the files attached to this post.
|
Sun Nov 27, 2016 7:17 pm |
|
|
SETx Longtail
MMT 1000 Club
Joined: Sun Sep 01, 2013 2:53 pm Posts: 3480 Location: Hardin County, Tx
|
Re: Godevil 1636 duck skiff revamp
Man that looks like a jam-up little rig. I wouldn't mind having one of the duck skiff models one day.
_________________ #CFFITR
-Custom pool noodle -stage 4 water wings
|
Sun Nov 27, 2016 7:54 pm |
|
|
Will C
MMT Sponsor
Joined: Fri Jan 10, 2014 1:16 pm Posts: 2107 Location: Gladewater TX
|
Re: Godevil 1636 duck skiff revamp
X2.. cool little rig
|
Sun Nov 27, 2016 8:10 pm |
|
|
killin'time
MMT Member
Joined: Sat Jul 27, 2013 12:40 pm Posts: 16
|
Re: Godevil 1636 duck skiff revamp
Boat definitely has its pros and cons, but I like it. Pro: super easy to hide. Just run right into the cattails or roseau canes. Pro: able to run down smaller ditches Pro: performs very well in shallow water and grass Con: very tight quarters, make hunting more than 3 people a challenge. I have hunted 2 kids and 2 adults out of the boat comfortably. Con: not very good in rough water. You will get wet.
If you find one for sale, better snatch it up quick because they don't last very long on the market.
|
Sun Nov 27, 2016 9:29 pm |
|
|
btmannin
MMT 1000 Club
Joined: Tue Jan 15, 2013 5:25 pm Posts: 1723 Location: Oxford/Jackson ms
|
Re: Godevil 1636 duck skiff revamp
_________________ 1436 tin can shoved by a 16 GDLT 16.5x48 running like hell from a built 40 merc
Well they call me king turd up here on shit mountain, but if you want it you can have the crown.
|
Sun Nov 27, 2016 11:10 pm |
|
|
killin'time
MMT Member
Joined: Sat Jul 27, 2013 12:40 pm Posts: 16
|
Re: Godevil 1636 duck skiff revamp
|
Mon Nov 28, 2016 3:38 pm |
|
|
flint87
MMT 1000 Club
Joined: Sun Dec 14, 2014 2:21 pm Posts: 3214
|
Re: Godevil 1636 duck skiff revamp
Good to know that it will hold that surface drive. I am about to trade my 1860 for a 18 foot duck skiff and down the road planning to hang a 25 gdsd on the back. They're cool boats and it's gona suit me a lot better than the barge I'm currently operating.
Sent from my iPhone using Tapatalk
|
Mon Nov 28, 2016 3:46 pm |
|
|
killin'time
MMT Member
Joined: Sat Jul 27, 2013 12:40 pm Posts: 16
|
Re: Godevil 1636 duck skiff revamp
|
Mon Nov 28, 2016 6:50 pm |
|
|
flint87
MMT 1000 Club
Joined: Sun Dec 14, 2014 2:21 pm Posts: 3214
|
Re: Godevil 1636 duck skiff revamp
|
Tue Nov 29, 2016 5:22 am |
|
|
flint87
MMT 1000 Club
Joined: Sun Dec 14, 2014 2:21 pm Posts: 3214
|
Re: Godevil 1636 duck skiff revamp
There's not much I for on these boats on line. Very few pics and no videos
Sent from my iPhone using Tapatalk
|
Tue Nov 29, 2016 11:10 am |
|
|
Frog
MMT Sponsor
Joined: Mon Jun 13, 2011 8:49 am Posts: 3260
|
Re: Godevil 1636 duck skiff revamp
look at that thing, would ya look at that! You should just sell it to me and be done with it!!!
_________________ http://www.gatorglide.com/
gatorheads@comcast.net
|
Tue Nov 29, 2016 12:52 pm |
|
|
killin'time
MMT Member
Joined: Sat Jul 27, 2013 12:40 pm Posts: 16
|
Re: Godevil 1636 duck skiff revamp
|
Tue Nov 29, 2016 1:19 pm |
|
|
Frog
MMT Sponsor
Joined: Mon Jun 13, 2011 8:49 am Posts: 3260
|
Re: Godevil 1636 duck skiff revamp
_________________ http://www.gatorglide.com/
gatorheads@comcast.net
|
Tue Nov 29, 2016 1:26 pm |
|
|
cmk07c
MMT Addict
Joined: Thu Jul 21, 2011 9:11 am Posts: 556 Location: Metairie, LA
|
Re: Godevil 1636 duck skiff revamp
Sweet rig for sure.
Sent from my SM-G930V using Tapatalk
|
Tue Nov 29, 2016 3:33 pm |
|
|
killin'time
MMT Member
Joined: Sat Jul 27, 2013 12:40 pm Posts: 16
|
Re: Godevil 1636 duck skiff revamp
Another pic of the boat with the blind installed.
You do not have the required permissions to view the files attached to this post.
|
Sun Dec 04, 2016 5:18 pm |
|
|
flint87
MMT 1000 Club
Joined: Sun Dec 14, 2014 2:21 pm Posts: 3214
|
Re: Godevil 1636 duck skiff revamp
|
Sun Dec 04, 2016 5:57 pm |
|
|
killin'time
MMT Member
Joined: Sat Jul 27, 2013 12:40 pm Posts: 16
|
Re: Godevil 1636 duck skiff revamp
|
Sun Dec 04, 2016 8:36 pm |
|
|
killin'time
MMT Member
Joined: Sat Jul 27, 2013 12:40 pm Posts: 16
|
Re: Godevil 1636 duck skiff revamp
|
Sun Dec 04, 2016 8:36 pm |
|
|
FullChokeFowl
MMT Member
Joined: Tue Dec 17, 2019 5:16 am Posts: 6
|
Re: Godevil 1636 duck skiff revamp
_________________ From The Wild To The Wall! - Full Choke Fowl Taxidermy
|
Mon Oct 05, 2020 5:27 pm |
|
|
killin'time
MMT Member
Joined: Sat Jul 27, 2013 12:40 pm Posts: 16
|
Re: Godevil 1636 duck skiff revamp
|
Mon Oct 05, 2020 6:05 pm |
|
|
FullChokeFowl
MMT Member
Joined: Tue Dec 17, 2019 5:16 am Posts: 6
|
Re: Godevil 1636 duck skiff revamp
PM Sent brotha! Thanks!
_________________ From The Wild To The Wall! - Full Choke Fowl Taxidermy
|
Mon Oct 05, 2020 6:20 pm |
|
|
|